s7-200plc控制的自动喷泉系统

目录
第一章 绪论
1.1 课题的提出··················································１
1.2 课题所涉及的内容··········································· １
1.3 课题设计的目的及意义······································· ２
第二章 系统控制方案的确定
2.1 喷泉的概述················································· ２
2.2 喷泉系统的控制方案········································· ３
2.3 喷泉系统的控制原理图······································· ４
第三章 系统硬件设定
3.1 PLC的选择················································· ４
3.2水泵的选择················································· ８
3.3 硬件接线图················································ １３
3.4 变频器的设定·············································· １５
第四章 系统程序设计
4.1 I/O分配表················································ １６
4.2程序梯形图················································ １７
第五章 结论··············································· ２８
参考文献···················································· ２９
1.2 课题所涉及的内容
本设计对喷泉的整体设计通过喷泉平面设计图的方式展现出来。选择合适的水泵使它既完成了为喷泉提供水压的目的同时降低其自身故障的出现率。
本文基于S7-200编程软件设计了喷泉控制系统，使其控制喷泉有规律的喷水，要求其有多种样式喷水效果以及喷水高度以提高其观赏性。本设计要求能实现样式之间无障碍转换、单次与循环的选择以及按下启动时可以从喷泉的喷水效果中直观的表现出来。按下启动按钮，当喷泉在进行花样动作时按下停止按钮，喷泉需完成当时正在做的整1组动作后再停止。
1.3 课题设计的目的及意义
我认为本次毕业设计的意义是通过此设计让我们完成从校园基础理论的学习到社会实践运用的一个过渡过程；是我自己对自身所学知识的温习以及自我整理、通过学习的理论知识在本课题上的实践运用完成从理论到实践的过程。
本课题设计的主要目的是通过对喷泉的工作原理、喷泉的控制系统的研究，明确该喷泉的控制系统的核心要求。通过PLC控制程序的编写，进一步熟悉掌握PLC编程和编程后调试的方法、PLC与变频器之间的通讯要求以及控制系统对硬件的要求。