# udhcpc: broadcasting discover
ifconfig
eth0 Link encap:Ethernet HWaddr EE:BA:AF:EE:58:85
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:3 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:489 (489.0 B) TX bytes:489 (489.0 B)
# udhcpc: broadcasting discover
udhcpc: broadcasting discover
[ 60.945500] mmc0: card 0001 removed
[ 60.953759] EXT4-fs warning (device mmcblk0p2): ext4_end_bio:343: I/O error 10 writing to inode 1769 starting block 78338)
[ 60.966744] Buffer I/O error on device mmcblk0p2, logical block 53762
[ 60.977705] Aborting journal on device mmcblk0p2-8.
[ 60.982862] JBD2: I/O error when updating journal superblock for mmcblk0p2-8.
[ 60.993548] EXT4-fs (mmcblk0p2): shut down requested (2)
[ 61.045179] fec 20b4000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 64.485198] cfg80211: failed to load regulatory.db
Jan 1 00:05:42 imx6ull kern.info kernel: [ 64.485198] cfg80211: failed to load regulatory.db
#
# ifconfig
-sh: ifconfig: Input/output error
# ifconfig -a
-sh: ifconfig: Input/output error
# reboot -f
-sh: reboot: Input/output error
# udhcpc: broadcasting discover
udhcpc: broadcasting select for 10.20.18.47, server 10.20.18.1
udhcpc: lease of 10.20.18.47 obtained from 10.20.18.1, lease time 86400
04-19
5884

03-14
4657

04-26
5441
