关于MAKE.EXE: /bin/sh: Command not found

摘自:http://cygwin.com/ml/cygwin/1997-06/msg00587.html

最近在项目里要用到cygwin，但是编译程序时总是提示
make: /bin/sh: Command not found.
但是我已经将c:\cygwin\bin添加到环境变量中，并在cmd中验证了，但是错误依然。

后来在网上找到如下邮件，在C盘新建bin文件夹，再拷入sh.exe,一切就OK。

On Thu, 26 Jun 1997, John E Hein wrote:

>
> I am running under Windows 95 (command.com... not bash).
> When I run make, I get the following error:
>
> MAKE.EXE: /bin/sh: Command not found
>

Make expects to find that /bin/sh program. It's not something you can get
around. If you want to use make from outside of bash, make a C:\bin and
put a copy of sh.exe in it. (Assuming your running off of C-drive.)

If your files are on the network at G:\whatever, then I believe (but am
not sure) that make will look for G:\bin\sh.exe.

I run under Win'95 as well, and have not found any way around this. Even
if sh.exe is somewhere else on the path, make looks for it in /bin.

If you were running out of bash, you could mount the /bin as wherever your
sh.exe is located.