1./tmp/RT2860.dat 文件
进行配置wifi,字段说明详情看手册
mtk_wi-fi_softap_software_programming_guide_v4.6.pdf
2.启动wifi命令
ifconfig ra0 up/down
3.wifi驱动DEBUG
查看驱动输出信息
wpriv ra0 set Debug=3
0~5
0: Debug Off
1: Debug Error
2: Debug Warning
3: Debug Trace
4: Debug Info
5: Debug Loud
<
4.驱动版本
iwpriv ra0 set DriverVersion=0 //可以是任何值,唤出wifi驱动版本输出
[ 559.170000] Driver version-3.0.5.0 Sep 19 2016 11:20:36
5.设置profile配置文件
iwpriv ra0 set CountryRegion=5
6.iwpriv其他命令
1.获取统计信息
==>iwpriv ra0 stat
while [ 1 ]; do iwpriv ra0 set ResetCounter=1; sleep 1; iwpriv ra0 stat; done;获取每秒统计信息
2.获取接收wifi信息结果
1 wifi_test 32:4a:26:5a:be:cc WPA2PSK/AES 29 11b/g/n ABOVE In NO
1 222 c0:a5:dd:76:81:6c WPA1PSKWPA2PSK/AES 26 11b/g/n NONE In NO
2 EOSM50 64:64:4a:2b:a5:ca WPA1PSKWPA2PSK/TKIPAES 24 11b/g/n NONE In YES
6 ChinaNet-VvU2 74:b7:b3:2c:b8:2a WPA1PSKWPA2PSK/TKIPAES 24 11b/g/n NONE In YES
11 FGTC 34:f7:16:9e:ef:99 WPA1PSKWPA2PSK/AES 0 11b/g/n BELOW In NO
11 MiraScreen BF93E45E d2:c0:bf:93:e4:5e WPA2PSK/AES 0 11b/g/n NONE In YES
6 MLYZ 34:f7:16:b5:01:da WPA1PSKWPA2PSK/AES 0 11b/g/n BELOW In NO
1 ChinaNet-VsCY 92:a5:af:52:3b:34 WPA1PSKWPA2PSK/TKIPAES 0 11b/g/n NONE In YES
4 HI-HSKD 00:0c:43:76:20:a8 WPA2PSK/TKIPAES 0 11b/g/n NONE In NO
3.获取接收连接wifi设备的mac地址
[ 1064.780000]
[ 1064.780000] HT Operating Mode : 0
[ 1064.790000]
[ 1064.790000]
[ 1064.790000] MAC MODE AID BSS PSM WMM MIMOPS RSSI0/1/2 PhMd BW MCS SGI STBC Idle Rate
[ 1064.810000] B4:CD:27:1B:EA:6C 200011 0 1 1 3 -61/-70/0 HTMIX 40M 7 1 1 298 150 0 , 419, 100%
[ 1064.840000] MaxCap:HTMIX 40M 7 1 1
4.获取接收字节数
[ 1439.730000]
[ 1439.730000] HT Operating Mode : 0
[ 1439.740000]
[ 1439.740000]
[ 1439.740000] MAC AID TxPackets RxPackets TxBytes RxBytes
[ 1439.760000] B4:CD:27:1B:EA:6C 1 436 903 30504 88501
iwconfig命令
root@1:/tmp# iwconfig ra0
ra0 RTWIFI SoftAP ESSID:"HI-WOOYAE14E"
Mode:Managed Channel=11 Access Point: 3D:1E:4F:5B:07:02
Bit Rate=144 Mb/s