路由配置登录!
hdwwiz 添加网络设备, 环回卡 Microsoft KM-TEST 环回适配器( Microsoft Loopback Adapter)
测试ping 不通时要关闭防火墙
nslookup
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sy router
[router]telnet server enable
Error: TELNET server has been enabled
[router]int g0/0/0
[router-GigabitEthernet0/0/0]ip add 192.168.10.188 24
[router-GigabitEthernet0/0/0]q
[router]user-interface vty 0 4
[router-ui-vty0-4]protocol inbound telnet
[router-ui-vty0-4]authentication-mode password
Please configure the login password (maximum length 16):208yyds
[router-ui-vty0-4]user privilege level 3
[router-ui-vty0-4]dis this
[V200R003C00]
#
user-interface con 0
authentication-mode password
user-interface vty 0 4
authentication-mode password
user privilege level 3
set authentication password cipher %$%$DF"h~ZoZOP<983BQ@=I,,.LppCUGSp;l;4y^UIA[
VCiO.Ls,%$%$
user-interface vty 16 20
#
return
[router-ui-vty0-4]q
[router]int g0/0/0
[router-GigabitEthernet0/0/0]dis this
[V200R003C00]
#
interface GigabitEthernet0/0/0
ip address 192.168.10.188 255.255.255.0
#
return
[router-GigabitEthernet0/0/0]ip add 192.168.31.188 24
[router-GigabitEthernet0/0/0]dis this
[V200R003C00]
#
interface GigabitEthernet0/0/0
ip address 192.168.31.188 255.255.255.0
#
return
[router-GigabitEthernet0/0/0]ping 192.168.31.7
PING 192.168.31.7: 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
Request time out
--- 192.168.31.7 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss