如trace event一章的描述，任何一种trace都离不开以下流程：
- 函数插桩。使用各种插桩方式把自己的trace函数插入到需要跟踪的probe point上；
- input trace数据。在trace的probe函数被命中时，会存储数据到ringbuffer当中；这里还包括filter和trigger功能；
- ouput trace数据。用户或者程序需要读出trace数据，根据需要输出ram数据或者是方面用户阅读的数据；对数据的解析，遵循谁存储谁提供解析规则的原则；
以function tracer为首的tracer也遵循同样的流程。
1、fucntion tracer
function tracer最大的难点在于：dynamic ftrace时(如不做说明本文默认dynamic)对大量插桩点的管理。
root:/d/tracing # cat available_filter_functions | wc -l
49099
root:/d/tracing #
root:/d/tracing # cat available_events | wc -l
987可以看到上述一个普通的系统，function tracer的插桩点为49099个，trace event的插桩点为987个。function tracer的插桩点几乎大于trace event插桩点两个数量级，而且trace event的插桩点是每一个插桩点都是独立控制的，而function tracer的插桩点默认是一起控制的(也可以通过set_ftrace_filter、set_ftrace_notrace来分开控制)。
这么庞大的数量的插桩点。如果独立控制会消耗大量的内存，如果集中控制又怎么能实现部分的filter和command控制？一旦桩函数的实现不简洁，开销会迅速放大。对这部分感兴趣可以直接跳转到1.2.2、插桩点的动态管理。
1.1、插桩原理
1.1.1、_mcount()
众所周知function trace是利用_mcount()函数进行插桩的。在gcc使用了“-pg”选项以后，会在每个函数的入口插入以下语句：
function:
...
mov x0, x30
bl _mcount
[function's body ...]默认的_mcount函数是空操作：
ENTRY(_mcount)
ret
ENDPROC(_mcount)每个函数入口插入对_mcount()函数的调用，就是gcc提供的插桩机制。我们可以重新定义_mcount()函数中的内容，调用想要执行的内容。
1.1.2、static ftrace插桩
static ftrace就是使用重定义_mcount()函数的方法来实现插桩的:
arch/arm64/kernel/entry-ftrace.S：
#ifndef CONFIG_DYNAMIC_FTRACE
/*
* void _mcount(unsigned long return_address)
* @return_address: return address to instrumented function
*
* This function makes calls, if enabled, to:
* - tracer function to probe instrumented function's entry,
* - ftrace_graph_caller to set up an exit hook
*/
ENTRY(_mcount)
mcount_enter
adrp x0, ftrace_trace_function
ldr x2, [x0, #:lo12:ftrace_trace_function]
adr x0, ftrace_stub
cmp x0, x2 // if (ftrace_trace_function
b.eq skip_ftrace_call // != ftrace_stub) {
mcount_get_pc x0 // function's pc
mcount_get_lr x1 // function's lr (= parent's pc)
blr x2 // (*ftrace_trace_function)(pc, lr);
#ifndef CONFIG_FUNCTION_GRAPH_TRACER
skip_ftrace_call: // return;
mcount_exit // }
#else
mcount_exit // return;
// }
skip_ftrace_call:
adrp x1, ftrace_graph_return
ldr x2, [x1, #:lo12:ftrace_graph_return]
cmp x0, x2 // if ((ftrace_graph_return
b.ne ftrace_graph_caller // != ftrace_stub)
adrp x1, ftrace_graph_entry // || (ftrace_graph_entry
adrp x0, ftrace_graph_entry_stub // != ftrace_graph_entry_stub))
ldr x2, [x1, #:lo12:ftrace_graph_entry]
add x0, x0, #:lo12:ftrace_graph_entry_stub
cmp x0, x2
b.ne ftrace_graph_caller // ftrace_graph_caller();
mcount_exit
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
ENDPROC(_mcount)
#else /* CONFIG_DYNAMIC_FTRACE */对应的伪代码如下：
void _mcount(void)
{
/* save any bare state needed in order to do initial checking */
/* (1) 如果函数指针ftrace_trace_function不等于默认的桩函数ftrace_stub，
调用function tracer的回调函数：ftrace_trace_function()
*/
extern void (*ftrace_trace_function)(unsigned long, unsigned long);
if (ftrace_trace_function != ftrace_stub)
goto do_trace;
/* (2) 如果 (ftrace_trace_function = = ftrace_stub) &&
(ftrace_graph_return != ftrace_stub ||
ftrace_graph_entry != ftrace_graph_entry_stub)
调用function_graph tracer的回调函数：ftrace_graph_caller()
*/
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
extern void (*ftrace_graph_return)(...);
extern void (*ftrace_graph_entry)(...);
if (ftrace_graph_return != ftrace_stub ||
ftrace_graph_entry != ftrace_graph_entry_stub)
ftrace_graph_caller();
+#endif
/* restore any bare state */
return;
do_trace:
/* save all state needed by the ABI (see paragraph above) */
unsigned long frompc = ...;
unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
/* (1.1) 调用function tracer的回调函数：ftrace_trace_function() */
ftrace_trace_function(frompc, selfpc);
/* restore all state needed by the ABI */
}问：static ftrace下，怎么保准notrace的函数不被跟踪？
1.1.3、dynamic ftrace插桩
static ftrace一旦使能，对kernel中所有的函数(除开notrace、online、其他特殊函数)进行插桩，这带来的性能开销是惊人的，有可能导致人们弃用ftrace功能。
为了解决这个问题，内核开发者推出了dynamic ftrace。因为实际上调试者一般不需要对所有函数进行追踪，只会对感兴趣的一部分函数进行追踪。dynamic ftrace把不需要追踪的函数入口处指令“bl _mcount”替换成“nop”，这样基本对性能无影响；对需要追踪的函替换入口处“bl _mcount”为需要调用的函数。
1、ftrace在初始化时，根据编译时“scripts/recordmcount.pl”脚本记录的所有函数入口处插桩位置的“bl _mcount”，将其替换成“nop”指令：
2、在tracer enable的时候，把需要跟踪的函数的插桩位置“nop”替换成“bl ftrace_caller”。
为什么不使用“bl _mcount”？主要原因是开发者不喜欢在_mcount()中使用宏来区分两种情况，索性重新创建一个新函数ftrace_caller()。
arch/arm64/kernel/entry-ftrace.S：
#ifndef CONFIG_DYNAMIC_FTRACE
#else /* CONFIG_DYNAMIC_FTRACE */
/*
* _mcount() is used to build the kernel with -pg option, but all the branch
* instructions to _mcount() are replaced to NOP initially at kernel start up,
* and later on, NOP to branch to ftrace_caller() when enabled or branch to
* NOP when disabled per-function base.
*/
ENTRY(_mcount)
ret
ENDPROC(_mcount)
/*
* void ftrace_caller(unsigned long return_address)
* @return_address: return address to instrumented function
*
* This function is a counterpart of _mcount() in 'static' ftrace, and
* makes calls to:
* - tracer function to probe instrumented function's entry,
* - ftrace_graph_caller to set up an exit hook
*/
ENTRY(ftrace_caller)
mcount_enter
mcount_get_pc0 x0 // function's pc
mcount_get_lr x1 // function's lr
.global ftrace_call
ftrace_call: // tracer(pc, lr);
nop // This will be replaced with "bl xxx"
// where xxx can be any kind of tracer.
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
.global ftrace_graph_call
ftrace_graph_call: // ftrace_graph_caller();
nop // If enabled, this will be replaced
// "b ftrace_graph_caller"
#endif
mcount_exit
ENDPROC(ftrace_caller)
#endif /* CONFIG_DYNAMIC_FTRACE */对应的伪代码为：
void ftrace_caller(void)
{
/* save all state needed by the ABI (see paragraph above) */
unsigned long frompc = ...;
unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
/* This will be replaced with "bl xxx" where xxx can be any kind of tracer. */
/* (1) function tracer的桩位置
放弃了函数指针，使用nop指令占位，在运行时动态修改指令到"bl xxx"
*/
ftrace_call:
nop
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* If enabled, this will be replaced "b ftrace_graph_caller" */
/* (2) function_graph tracer的桩位置
放弃了函数指针，使用nop指令占位，在运行时动态修改指令到"b ftrace_graph_caller"
*/
ftrace_graph_call:
nop
#endif
/* restore all state needed by the ABI */
return;
}1.2、插桩点管理
1.2.1、插桩点的初始化
1、在编译的时候调用recordmcount.pl搜集所有_mcount()函数的调用点，并且所有的调用点地址保存到section __mcount_loc。
include/asm-generic/vmlinux.lds.h:
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
#define MCOUNT_REC() . = ALIGN(8); \
VMLINUX_SYMBOL(__start_mcount_loc) = .; \
*(__mcount_loc) \
VMLINUX_SYMBOL(__stop_mcount_loc) = .;
#else
#define MCOUNT_REC()
#endif并没有详细去研究其原理，感兴趣可以具体研究一下“scripts/recordmcount.pl、scripts/recordmcount.c”。
2、在初始化时，遍历section __mcount_loc的调用点地址，默认给所有“bl _mcount”替换成“nop”。
kernel/trace/ftrace.c：
void __init ftrace_init(void)
{
extern unsigned long __start_mcount_loc[];
extern unsigned long __stop_mcount_loc[];
unsigned long count, flags;
int ret;
local_irq_save(flags);
ret = ftrace_dyn_arch_init();
local_irq_restore(flags);
if (ret)
goto failed;
count = __stop_mcount_loc - __start_mcount_loc;
if (!count) {
pr_info("ftrace: No functions to be traced?\n");
goto failed;
}
pr_info("ftrace: allocating %ld entries in %ld pages\n",
count, count / ENTRIES_PER_PAGE + 1);
last_ftrace_enabled = ftrace_enabled = 1;
/* 遍历section __mcount_loc，处理其中保存的调用地址 */
ret = ftrace_process_locs(NULL,
__start_mcount_loc,
__stop_mcount_loc);
ret = register_module_notifier(&ftrace_module_exit_nb);
if (ret)
pr_warning("Failed to register trace ftrace module exit notifier\n");
set_ftrace_early_filters();
return;
failed:
ftrace_disabled = 1;
}
|→
static int ftrace_process_locs(struct module *mod,
unsigned long *start,
unsigned long *end)
{
struct ftrace_page *start_pg;
struct ftrace_page *pg;
struct dyn_ftrace *rec;
unsigned long count;
unsigned long *p;
unsigned long addr;
unsigned long flags = 0; /* Shut up gcc */
int ret = -ENOMEM;
count = end - start;
if (!count)
return 0;
/* (1) 对地址进行排序 */
sort(start, count, sizeof(*start),
ftrace_cmp_ips, NULL);
/* (2) 对每个地址分配新的dyn_ftrace结构来存储
在section __mcount_loc中，只是简单的存储了unsigned long类型的调用地址
dyn_ftrace结构除了使用->ip来存储地址，还使用->flags来存储当前的状态和被引用计数
*/
start_pg = ftrace_allocate_pages(count);
if (!start_pg)
return -ENOMEM;
mutex_lock(&ftrace_lock);
/*
* Core and each module needs their own pages, as
* modules will free them when they are removed.
* Force a new page to be allocated for modules.
*/
if (!mod) {
WARN_ON(ftrace_pages || ftrace_pages_start);
/* First initialization */
ftrace_pages = ftrace_pages_start = start_pg;
} else {
if (!ftrace_pages)
goto out;
if (WARN_ON(ftrace_pages->next)) {
/* Hmm, we have free pages? */
while (ftrace_pages->next)
ftrace_pages = ftrace_pages->next;
}
ftrace_pages->next = start_pg;
}
/* (3) 更新dyn_ftrace新结构中的->ip字段 */
p = start;
pg = start_pg;
while (p < end) {
addr = ftrace_call_adjust(*p++);
/*
* Some architecture linkers will pad between
* the different mcount_loc sections of different
* object files to satisfy alignments.
* Skip any NULL pointers.
*/
if (!addr)
continue;
if (pg->index == pg->size) {
/* We should have allocated enough */
if (WARN_ON(!pg->next))
break;
pg = pg->next;
}
rec = &pg->records[pg->index++];
rec->ip = addr;
}
/* We should have used all pages */
WARN_ON(pg->next);
/* Assign the last page to ftrace_pages */
ftrace_pages = pg;
/*
* We only need to disable interrupts on start up
* because we are modifying code that an interrupt
* may execute, and the modification is not atomic.
* But for modules, nothing runs the code we modify
* until we are finished with it, and there's no
* reason to cause large interrupt latencies while we do it.
*/
if (!mod)
local_irq_save(flags);
/* (4) 更新dyn_ftrace新结构中的->flags字段
默认给所有调用点替换成“nop”指令
*/
ftrace_update_code(mod, start_pg);
if (!mod)
local_irq_restore(flags);
ret = 0;
out:
mutex_unlock(&ftrace_lock);
return ret;
}
||→
static int ftrace_update_code(struct module *mod, struct ftrace_page *new_pgs)
{
struct ftrace_page *pg;
struct dyn_ftrace *p;
cycle_t start, stop;
unsigned long update_cnt = 0;
unsigned long ref = 0;
bool test = false;
int i;
/*
* When adding a module, we need to check if tracers are
* currently enabled and if they are set to trace all functions.
* If they are, we need to enable the module functions as well
* as update the reference counts for those function records.
*/
if (mod) {
struct ftrace_ops *ops;
for (ops = ftrace_ops_list;
ops != &ftrace_list_end; ops = ops->next) {
if (ops->flags & FTRACE_OPS_FL_ENABLED) {
if (ops_traces_mod(ops))
ref++;
else
test = true;
}
}
}
start = ftrace_now(raw_smp_processor_id());
/* (4.1) 逐个遍历dyn_ftrace结构 */
for (pg = new_pgs; pg; pg = pg->next) {
for (i = 0; i < pg->index; i++) {
int cnt = ref;
/* If something went wrong, bail without enabling anything */
if (unlikely(ftrace_disabled))
return -1;
p = &pg->records[i];
/* (4.2) 根据有多少个filter操作对调用点地址的引用，
给dyn_ftrace->flags字段中的引用count部分赋值
*/
if (test)
cnt += referenced_filters(p);
p->flags = cnt;
/*
* Do the initial record conversion from mcount jump
* to the NOP instructions.
*/
/* (4.3) 默认把所有的调用点修改成“nop” */
if (!ftrace_code_disable(mod, p))
break;
update_cnt++;
/*
* If the tracing is enabled, go ahead and enable the record.
*
* The reason not to enable the record immediatelly is the
* inherent check of ftrace_make_nop/ftrace_make_call for
* correct previous instructions. Making first the NOP
* conversion puts the module to the correct state, thus
* passing the ftrace_make_call check.
*/
if (ftrace_start_up && cnt) {
/* (4.4) 如果tracing已经使能，且引用计数不为0
使能这个调用点
*/
int failed = __ftrace_replace_code(p, 1);
if (failed)
ftrace_bug(failed, p);
}
}
}
stop = ftrace_now(raw_smp_processor_id());
ftrace_update_time = stop - start;
ftrace_update_tot_cnt += update_cnt;
return 0;
}
1.2.2、插桩点的动态管理
为了应对本文最开始处提出的难题，内核使用了插桩点控制链表+命令hash表的形式。
function tracer插桩点动态管理的原理：
- 1、每个“bl _mcount”的插桩点ip对应一个每个插桩点对应一个dyn_ftrace结构。dyn_ftrace->flags的低26bit用来表示引用计数，如果有ftrcae_ops会操作到该ip，引用计数会加1。如果ref_cnt大于0，插桩点就需要使能了，把其替换为“bl ftrace_caller”；
- 2、ftrcae_ops采用hash表来表达对ip的引用，一个ftrcae_ops有两张hash表filter_hash和notrace_hash，综合的结果就是对ip的引用。function tracer模式时，有两个可能的ftrcae_ops：global_ops、trace_probe_ops。两个中任意一个引用到ip，都会造成ip的1级插桩点被替换为“bl ftrace_caller”；
- 3、通过设置“set_ftrace_filter/set_ftrace_notrace”会造成对global_ops的filter_hash/notrace_hash的配置，它的作用是配置function tracer的filter；
- 4、通过设置“set_ftrace_filter”会造成对trace_probe_ops的filter_hash的配置，它的作用是配置filter command，并且会把command和对应的ip加入到另外一张另外一张hash表ftrace_func_hash表中；
- 5、ftrace_caller()有两个2级插桩点：ftrace_call、ftrace_graph_call。在function tracer模式时，只有ftrace_call被设置成“bl ftrace_ops_list_func”；
- 6、ftrace_ops_list_func()的工作就是遍历ftrace_ops_list链表，逐个执行其中的ftrace_ops->func()。
- 7、global_ops的->func()函数为function_trace_call()，记录trace数据：ip + parent_ip；
- 8、trace_probe_ops的->func()函数为function_trace_probe_call()，逐个执行ftrace_func_hash表中，ip为本ip的filter command。
有以下几种场景，涉及到插桩点的动态管理：
- tracer的使能。当使用“echo xxx_tracer > current_tracer”时，会关闭旧的current tracer并使能新的tracer。典型的包括function tracer合入function_graph tracer；
- filter的配置。使用“echo function_name > set_ftrace_filter/set_ftrace_notrace”，可以配置部分function被trace，而不是所有function被trace；
- filter command的配置。使用“echo ‘!__schedule_bug:traceoff’ > set_ftrace_filter”，类似命令可以配置条件触发的command，当条件满足后command会被执行；
下面我们看看具体场景下的代码实现细节：
1.2.3、tracer注册
1、tracer注册。tracer可以通过register_tracer()进行注册。
以function tracer为例，kernel/trace/trace_functions.c：
static struct tracer function_trace __tracer_data =
{
.name = "function",
.init = function_trace_init,
.reset = function_trace_reset,
.start = function_trace_start,
.flags = &func_flags,
.set_flag = func_set_flag,
.allow_instances = true,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_function,
#endif
};
static __init int init_function_trace(void)
{
init_func_cmd_traceon();
return register_tracer(&function_trace);
}register_tracer()的实现，kernel/trace/trace.c：
int __init register_tracer(struct tracer *type)
{
struct tracer *t;
int ret = 0;
if (!type->name) {
pr_info("Tracer must have a name\n");
return -1;
}
if (strlen(type->name) >= MAX_TRACER_SIZE) {
pr_info("Tracer has a name longer than %d\n", MAX_TRACER_SIZE);
return -1;
}
mutex_lock(&trace_types_lock);
tracing_selftest_running = true;
/* (1) 如果tracer已经注册，直接返回 */
for (t = trace_types; t; t = t->next) {
if (strcmp(type->name, t->name) == 0) {
/* already found */
pr_info("Tracer %s already registered\n",
type->name);
ret = -1;
goto out;
}
}
/* (2) tracer对应的相关trace_option */
if (!type->set_flag)
type->set_flag = &dummy_set_flag;
if (!type->flags)
type->flags = &dummy_tracer_flags;
else
if (!type->flags->opts)
type->flags->opts = dummy_tracer_opt;
ret = run_tracer_selftest(type);
if (ret < 0)
goto out;
/* (3) 将新的tracer加入到trace_types链表中 */
type->next = trace_types;
trace_types = type;
add_tracer_options(&global_trace, type);
out:
tracing_selftest_running = false;
mutex_unlock(&trace_types_lock);
if (ret || !default_bootup_tracer)
goto out_unlock;
if (strncmp(default_bootup_tracer, type->name, MAX_TRACER_SIZE))
goto out_unlock;
printk(KERN_INFO "Starting tracer '%s'\n", type->name);
/* Do we want this tracer to start on bootup? */
/* (4) 设置boot默认的tracer */
tracing_set_tracer(&global_trace, type->name);
default_bootup_tracer = NULL;
apply_trace_boot_options();
/* disable other selftests, since this will break it. */
tracing_selftest_disabled = true;
#ifdef CONFIG_FTRACE_STARTUP_TEST
printk(KERN_INFO "Disabling FTRACE selftests due to running tracer '%s'\n",
type->name);
#endif
out_unlock:
return ret;
}1.2.4、tracer使能
2、tracer使能。我们可以使用“echo function > current_tracer”命令来使能或者切换tracer。
来具体看看其代码实现：
trace_create_file("current_tracer", 0644, d_tracer,
tr, &set_tracer_fops);
↓
static const struct file_operations set_tracer_fops = {
.open = tracing_open_generic,
.read = tracing_set_trace_read,
.write = tracing_set_trace_write,
.llseek = generic_file_llseek,
};
↓
static ssize_t
tracing_set_trace_write(struct file *filp, const char __user *ubuf,
size_t cnt, loff_t *ppos)
{
/* (1) 当前文件所在trace buffer，默认是global_trace
初始化时：
init_tracer_tracefs(&global_trace, d_tracer); ->
trace_create_file("current_tracer", 0644, d_tracer, tr, &set_tracer_fops);
*/
struct trace_array *tr = filp->private_data;
char buf[MAX_TRACER_SIZE+1];
int i;
size_t ret;
int err;
ret = cnt;
if (cnt > MAX_TRACER_SIZE)
cnt = MAX_TRACER_SIZE;
if (copy_from_user(&buf, ubuf, cnt))
return -EFAULT;
buf[cnt] = 0;
/* strip ending whitespace. */
for (i = cnt - 1; i > 0 && isspace(buf[i]); i--)
buf[i] = 0;
/* (2) 使能新的tracer */
err = tracing_set_tracer(tr, buf);
if (err)
return err;
*ppos += ret;
return ret;
}
|→
static int tracing_set_tracer(struct trace_array *tr, const char *buf)
{
struct tracer *t;
#ifdef CONFIG_TRACER_MAX_TRACE
bool had_max_tr;
#endif
int ret = 0;
mutex_lock(&trace_types_lock);
if (!ring_buffer_expanded) {
ret = __tracing_resize_ring_buffer(tr, trace_buf_size,
RING_BUFFER_ALL_CPUS);
if (ret < 0)
goto out;
ret = 0;
}
/* (2.1) 根据名字，在trace_types链表中找到对应的tracer */
for (t = trace_types; t; t = t->next) {
if (strcmp(t->name, buf) == 0)
break;
}
if (!t) {
ret = -EINVAL;
goto out;
}
if (t == tr->current_trace)
goto out;
/* Some tracers are only allowed for the top level buffer */
if (!trace_ok_for_array(t, tr)) {
ret = -EINVAL;
goto out;
}
/* If trace pipe files are being read, we can't change the tracer */
if (tr->current_trace->ref) {
ret = -EBUSY;
goto out;
}
trace_branch_disable();
/* (2.2) 去使能旧的当前tracer */
tr->current_trace->enabled--;
if (tr->current_trace->reset)
tr->current_trace->reset(tr);
/* Current trace needs to be nop_trace before synchronize_sched */
tr->current_trace = &nop_trace;
#ifdef CONFIG_TRACER_MAX_TRACE
had_max_tr = tr->allocated_snapshot;
if (had_max_tr && !t->use_max_tr) {
/*
* We need to make sure that the update_max_tr sees that
* current_trace changed to nop_trace to keep it from
* swapping the buffers after we resize it.
* The update_max_tr is called from interrupts disabled
* so a synchronized_sched() is sufficient.
*/
synchronize_sched();
free_snapshot(tr);
}
#endif
#ifdef CONFIG_TRACER_MAX_TRACE
if (t->use_max_tr && !had_max_tr) {
ret = alloc_snapshot(tr);
if (ret < 0)
goto out;
}
#endif
/* (2.3) 调用新tracer的init函数 */
if (t->init) {
ret = tracer_init(t, tr);
if (ret)
goto out;
}
/* (2.4) 把新的tracer设置为当前tracer */
tr->current_trace = t;
tr->current_trace->enabled++;
trace_branch_enable(tr);
out:
mutex_unlock(&trace_types_lock);
return ret;
}
||→
int tracer_init(struct tracer *t, struct trace_array *tr)
{
tracing_reset_online_cpus(&tr->trace_buffer);
return t->init(tr);
}1.2.5、function tracer使能
3、function tracer的使能。本质上是global_ops的注册后使能。
在初始化的时候，把global_trace的->ops初始化成了global_ops。
start_kernel() -> trace_init() -> tracer_alloc_buffers:
tracer_alloc_buffers
{
ftrace_init_global_array_ops(&global_trace);
}
↓
__init void ftrace_init_global_array_ops(struct trace_array *tr)
{
tr->ops = &global_ops;
tr->ops->private = tr;
}
static struct ftrace_ops global_ops = {
.func = ftrace_stub,
.local_hash.notrace_hash = EMPTY_HASH,
.local_hash.filter_hash = EMPTY_HASH,
INIT_OPS_HASH(global_ops)
.flags = FTRACE_OPS_FL_RECURSION_SAFE |
FTRACE_OPS_FL_INITIALIZED |
FTRACE_OPS_FL_PID,
};继续分析t->init()，以function tracer为例，调用到function_trace_init()：
static int function_trace_init(struct trace_array *tr)
{
ftrace_func_t func;
/*
* Instance trace_arrays get their ops allocated
* at instance creation. Unless it failed
* the allocation.
*/
/* (2.4.1) 这里的tr默认就是global_trace
这里的tr->ops默认是global_ops
*/
if (!tr->ops)
return -ENOMEM;
/* (2.4.2) func为保存trace信息到ringbuffer的函数 */
/* Currently only the global instance can do stack tracing */
if (tr->flags & TRACE_ARRAY_FL_GLOBAL &&
func_flags.val & TRACE_FUNC_OPT_STACK)
func = function_stack_trace_call;
else
func = function_trace_call;
/* (2.4.3) tr->ops->func = func */
ftrace_init_array_ops(tr, func);
tr->trace_buffer.cpu = get_cpu();
put_cpu();
tracing_start_cmdline_record();
/* (2.4.4) 启动function tracer
将tr->ops也加入到ftrace_ops_list当中
*/
tracing_start_function_trace(tr);
return 0;
}
↓
static void tracing_start_function_trace(struct trace_array *tr)
{
tr->function_enabled = 0;
register_ftrace_function(tr->ops);
tr->function_enabled = 1;
}
|→
int register_ftrace_function(struct ftrace_ops *ops)
{
int ret = -1;
/* (2.4.4.1) 初始化hash表
ops->func_hash = &ops->local_hash;
*/
ftrace_ops_init(ops);
mutex_lock(&ftrace_lock);
/* (2.4.4.2) 将global_ops加入ftrace_ops_list
并且根据情况，修改各个桩位置的指令
*/
ret = ftrace_startup(ops, 0);
mutex_unlock(&ftrace_lock);
return ret;
}
||→
static int ftrace_startup(struct ftrace_ops *ops, int command)
{
int ret;
if (unlikely(ftrace_disabled))
return -ENODEV;
/* (2.4.4.2.1) 1、把global_ops加入ftrace_ops_list
2、根据ftrace_ops_list链表中成员的情况给ftrace_trace_function指针赋值：
ftrace_ops_list链表为空，= ftrace_stub
ftrace_ops_list链表有1个成员，= ftrace_ops_get_list_func(ftrace_ops_list)
ftrace_ops_list链表有多个成员，= ftrace_ops_list_func
3、更新ftrace_graph_entry
*/
ret = __register_ftrace_function(ops);
if (ret)
return ret;
ftrace_start_up++;
command |= FTRACE_UPDATE_CALLS;
/*
* Note that ftrace probes uses this to start up
* and modify functions it will probe. But we still
* set the ADDING flag for modification, as probes
* do not have trampolines. If they add them in the
* future, then the probes will need to distinguish
* between adding and updating probes.
*/
ops->flags |= FTRACE_OPS_FL_ENABLED | FTRACE_OPS_FL_ADDING;
/* (2.4.4.2.2) 遍历全部_mcount插桩点ftrace_rec
根据ip在新、旧hash表中的变化，设置对应rec->flags中的FTRACE_FL_IPMODIFY
*/
ret = ftrace_hash_ipmodify_enable(ops);
if (ret < 0) {
/* Rollback registration process */
__unregister_ftrace_function(ops);
ftrace_start_up--;
ops->flags &= ~FTRACE_OPS_FL_ENABLED;
return ret;
}
/* (2.4.4.2.3) 遍历全部_mcount插桩点ftrace_rec
根据filter_hash、notrace_hash是否match ip，给对应rec->flags中ref_cnt进行加1/减1操作
*/
ftrace_hash_rec_enable(ops, 1);
/* (2.4.4.2.4) 更新插桩点：
FTRACE_UPDATE_CALLS被设置，更新_mcount插桩点：ref_cnt大于0的插桩点，更新成ftrace_caller()
FTRACE_UPDATE_TRACE_FUNC被设置，更新ftrace_call插桩点：更新成ftrace_trace_function指向的函数
FTRACE_START_FUNC_RET被设置，更新ftrace_graph_call插桩点：更新成ftrace_graph_caller()
*/
ftrace_startup_enable(command);
ops->flags &= ~FTRACE_OPS_FL_ADDING;
return 0;
}
↓
ftrace_startup_enable() -> ftrace_run_update_code() -> arch_ftrace_update_code() -> ftrace_modify_all_code() ->
void ftrace_modify_all_code(int command)
{
int update = command & FTRACE_UPDATE_TRACE_FUNC;
int err = 0;
/*
* If the ftrace_caller calls a ftrace_ops func directly,
* we need to make sure that it only traces functions it
* expects to trace. When doing the switch of functions,
* we need to update to the ftrace_ops_list_func first
* before the transition between old and new calls are set,
* as the ftrace_ops_list_func will check the ops hashes
* to make sure the ops are having the right functions
* traced.
*/
/* (2.4.4.2.4.1) 如果FTRACE_UPDATE_TRACE_FUNC被设置，对于ftrace_call插桩点，
直接调用ftrace_ops_list链表中某个ftrace_ops的操作需要谨慎
保险起见，默认还是使用ftrace_ops_list_func()，它会轮询ftrace_ops_list链表中所有ftrace_ops
*/
if (update) {
err = ftrace_update_ftrace_func(ftrace_ops_list_func);
if (FTRACE_WARN_ON(err))
return;
}
/* (2.4.4.2.4.2) 如果FTRACE_UPDATE_CALLS被设置，对于_mcount插桩点，
遍历全部ftrace_rec，ref_cnt大于0的插桩点，更新成ftrace_caller()
*/
if (command & FTRACE_UPDATE_CALLS)
ftrace_replace_code(1);
else if (command & FTRACE_DISABLE_CALLS)
ftrace_replace_code(0);
/* (2.4.4.2.4.3) 如果FTRACE_UPDATE_TRACE_FUNC被设置，对于ftrace_call插桩点，
如果ftrace_trace_function确实不等于ftrace_ops_list_func()
更新成ftrace_trace_function指向的函数
*/
if (update && ftrace_trace_function != ftrace_ops_list_func) {
function_trace_op = set_function_trace_op;
smp_wmb();
/* If irqs are disabled, we are in stop machine */
if (!irqs_disabled())
smp_call_function(ftrace_sync_ipi, NULL, 1);
err = ftrace_update_ftrace_func(ftrace_trace_function);
if (FTRACE_WARN_ON(err))
return;
}
/* (2.4.4.2.4.4) 如果FTRACE_START_FUNC_RET被设置，对于ftrace_graph_call插桩点，
更新成ftrace_graph_caller()
*/
if (command & FTRACE_START_FUNC_RET)
err = ftrace_enable_ftrace_graph_caller();
else if (command & FTRACE_STOP_FUNC_RET)
err = ftrace_disable_ftrace_graph_caller();
FTRACE_WARN_ON(err);
}
↓
void __weak ftrace_replace_code(int enable)
{
struct dyn_ftrace *rec;
struct ftrace_page *pg;
int failed;
if (unlikely(ftrace_disabled))
return;
/* 遍历ftrace_rec */
do_for_each_ftrace_rec(pg, rec) {
failed = __ftrace_replace_code(rec, enable);
if (failed) {
ftrace_bug(failed, rec);
/* Stop processing */
return;
}
} while_for_each_ftrace_rec();
}
↓
static int
__ftrace_replace_code(struct dyn_ftrace *rec, int enable)
{
unsigned long ftrace_old_addr;
unsigned long ftrace_addr;
int ret;
/* (2.4.4.2.4.2.1) _mcount插桩点使能后的地址为：
ops->trampoline or ftrace_caller
*/
ftrace_addr = ftrace_get_addr_new(rec);
/* This needs to be done before we call ftrace_update_record */
ftrace_old_addr = ftrace_get_addr_curr(rec);
/* (2.4.4.2.4.2.2) 根据rec->flags中的flag和refcnt，以及enable
得出操作是：FTRACE_UPDATE_IGNORE/FTRACE_UPDATE_MAKE_CALL/FTRACE_UPDATE_MAKE_NOP
*/
ret = ftrace_update_record(rec, enable);
/* (2.4.4.2.4.2.3) 修改_mcount插桩点处的指令为新的桩函数跳转指令 */
switch (ret) {
case FTRACE_UPDATE_IGNORE:
return 0;
case FTRACE_UPDATE_MAKE_CALL:
return ftrace_make_call(rec, ftrace_addr);
case FTRACE_UPDATE_MAKE_NOP:
return ftrace_make_nop(NULL, rec, ftrace_old_addr);
case FTRACE_UPDATE_MODIFY_CALL:
return ftrace_modify_call(rec, ftrace_old_addr, ftrace_addr);
}
return -1; /* unknow ftrace bug */
}1.2.6、配置function tracer的filter
4、通过“set_ftrace_filter”、“set_ftrace_notrace”设置function trcer的filter。本质上是操作global_ops的filter_hash、notrace_hash。
/* global_ops注册成inode->i_private */
ftrace_create_filter_files(&global_ops, d_tracer);
↓
void ftrace_create_filter_files(struct ftrace_ops *ops,
struct dentry *parent)
{
trace_create_file("set_ftrace_filter", 0644, parent,
ops, &ftrace_filter_fops);
trace_create_file("set_ftrace_notrace", 0644, parent,
ops, &ftrace_notrace_fops);
}
static const struct file_operations ftrace_filter_fops = {
.open = ftrace_filter_open,
.read = seq_read,
.write = ftrace_filter_write,
.llseek = tracing_lseek,
.release = ftrace_regex_release,
};“set_ftrace_filter”、“set_ftrace_notrace”的文件操作有个技巧，就是在open的时候分配一个临时hash表iter->hash来拷贝global_ops的filter_hash/notrace_hash的内容，在write操作实际设置filter时对iter->hash操作，在close的时候使用新的hash表iter->hash来更新global_ops。
open文件操作中对global_ops hash表的备份操作：
static int
ftrace_filter_open(struct inode *inode, struct file *file)
{
/* (1) 得到global_ops结构 */
struct ftrace_ops *ops = inode->i_private;
/* (2) */
return ftrace_regex_open(ops,
FTRACE_ITER_FILTER | FTRACE_ITER_DO_HASH,
inode, file);
}
↓
int
ftrace_regex_open(struct ftrace_ops *ops, int flag,
struct inode *inode, struct file *file)
{
struct ftrace_iterator *iter;
struct ftrace_hash *hash;
int ret = 0;
ftrace_ops_init(ops);
if (unlikely(ftrace_disabled))
return -ENODEV;
iter = kzalloc(sizeof(*iter), GFP_KERNEL);
if (!iter)
return -ENOMEM;
if (trace_parser_get_init(&iter->parser, FTRACE_BUFF_MAX)) {
kfree(iter);
return -ENOMEM;
}
iter->ops = ops;
iter->flags = flag;
mutex_lock(&ops->func_hash->regex_lock);
if (flag & FTRACE_ITER_NOTRACE)
hash = ops->func_hash->notrace_hash;
else
hash = ops->func_hash->filter_hash;
if (file->f_mode & FMODE_WRITE) {
const int size_bits = FTRACE_HASH_DEFAULT_BITS;
/* (2.1) 使用iter->hash备份global_ops中的filter_hash/notrace_hash */
if (file->f_flags & O_TRUNC)
iter->hash = alloc_ftrace_hash(size_bits);
else
iter->hash = alloc_and_copy_ftrace_hash(size_bits, hash);
if (!iter->hash) {
trace_parser_put(&iter->parser);
kfree(iter);
ret = -ENOMEM;
goto out_unlock;
}
}
if (file->f_mode & FMODE_READ) {
iter->pg = ftrace_pages_start;
ret = seq_open(file, &show_ftrace_seq_ops);
if (!ret) {
struct seq_file *m = file->private_data;
m->private = iter;
} else {
/* Failed */
free_ftrace_hash(iter->hash);
trace_parser_put(&iter->parser);
kfree(iter);
}
} else
file->private_data = iter;
out_unlock:
mutex_unlock(&ops->func_hash->regex_lock);
return ret;
}write文件操作中对iter->hash表的更新操作：
ftrace_filter_write() -> ftrace_regex_write()
↓
static ssize_t
ftrace_regex_write(struct file *file, const char __user *ubuf,
size_t cnt, loff_t *ppos, int enable)
{
struct ftrace_iterator *iter;
struct trace_parser *parser;
ssize_t ret, read;
if (!cnt)
return 0;
if (file->f_mode & FMODE_READ) {
struct seq_file *m = file->private_data;
iter = m->private;
} else
iter = file->private_data;
if (unlikely(ftrace_disabled))
return -ENODEV;
/* iter->hash is a local copy, so we don't need regex_lock */
parser = &iter->parser;
read = trace_get_user(parser, ubuf, cnt, ppos);
if (read >= 0 && trace_parser_loaded(parser) &&
!trace_parser_cont(parser)) {
/* (1) 解析filter配置命令，配置到iter->hash中 */
ret = ftrace_process_regex(iter->hash, parser->buffer,
parser->idx, enable);
trace_parser_clear(parser);
if (ret < 0)
goto out;
}
ret = read;
out:
return ret;
}
↓
static int ftrace_process_regex(struct ftrace_hash *hash,
char *buff, int len, int enable)
{
char *func, *command, *next = buff;
struct ftrace_func_command *p;
int ret = -EINVAL;
func = strsep(&next, ":");
/* (1.1) filter配置，更新iter->hash */
if (!next) {
ret = ftrace_match_records(hash, func, len);
if (!ret)
ret = -EINVAL;
if (ret < 0)
return ret;
return 0;
}
/* command found */
command = strsep(&next, ":");
/* (1.2) filter command配置，最后实际会操作到trace_probe_ops
和iter->hash、global_ops无关，下一小节中详述
*/
mutex_lock(&ftrace_cmd_mutex);
list_for_each_entry(p, &ftrace_commands, list) {
if (strcmp(p->name, command) == 0) {
ret = p->func(hash, func, command, next, enable);
goto out_unlock;
}
}
out_unlock:
mutex_unlock(&ftrace_cmd_mutex);
return ret;
}
↓
ftrace_match_records() -> match_records()
static int
match_records(struct ftrace_hash *hash, char *func, int len, char *mod)
{
struct ftrace_page *pg;
struct dyn_ftrace *rec;
struct ftrace_glob func_g = { .type = MATCH_FULL };
struct ftrace_glob mod_g = { .type = MATCH_FULL };
struct ftrace_glob *mod_match = (mod) ? &mod_g : NULL;
int exclude_mod = 0;
int found = 0;
int ret;
int clear_filter;
/* (1.1.1) 解析filter命令字符串
clear_filter = 命令中的“!”
*/
if (func) {
func_g.type = filter_parse_regex(func, len, &func_g.search,
&clear_filter);
func_g.len = strlen(func_g.search);
}
if (mod) {
mod_g.type = filter_parse_regex(mod, strlen(mod),
&mod_g.search, &exclude_mod);
mod_g.len = strlen(mod_g.search);
}
mutex_lock(&ftrace_lock);
if (unlikely(ftrace_disabled))
goto out_unlock;
/* (1.1.2) 遍历ftrcae_rec */
do_for_each_ftrace_rec(pg, rec) {
/* 如果ip在filter中存在，将其加入/删除到iter->hash中 */
if (ftrace_match_record(rec, &func_g, mod_match, exclude_mod)) {
ret = enter_record(hash, rec, clear_filter);
if (ret < 0) {
found = ret;
goto out_unlock;
}
found = 1;
}
} while_for_each_ftrace_rec();
out_unlock:
mutex_unlock(&ftrace_lock);
return found;
}
↓
static int
enter_record(struct ftrace_hash *hash, struct dyn_ftrace *rec, int clear_filter)
{
struct ftrace_func_entry *entry;
int ret = 0;
entry = ftrace_lookup_ip(hash, rec->ip);
if (clear_filter) {
/* Do nothing if it doesn't exist */
if (!entry)
return 0;
free_hash_entry(hash, entry);
} else {
/* Do nothing if it exists */
if (entry)
return 0;
ret = add_hash_entry(hash, rec->ip);
}
return ret;
}close文件操作中对global_ops hash表的更新操作：
int ftrace_regex_release(struct inode *inode, struct file *file)
{
struct seq_file *m = (struct seq_file *)file->private_data;
struct ftrace_ops_hash old_hash_ops;
struct ftrace_iterator *iter;
struct ftrace_hash **orig_hash;
struct ftrace_hash *old_hash;
struct trace_parser *parser;
int filter_hash;
int ret;
if (file->f_mode & FMODE_READ) {
iter = m->private;
seq_release(inode, file);
} else
iter = file->private_data;
parser = &iter->parser;
if (trace_parser_loaded(parser)) {
parser->buffer[parser->idx] = 0;
ftrace_match_records(iter->hash, parser->buffer, parser->idx);
}
trace_parser_put(parser);
mutex_lock(&iter->ops->func_hash->regex_lock);
if (file->f_mode & FMODE_WRITE) {
filter_hash = !!(iter->flags & FTRACE_ITER_FILTER);
if (filter_hash)
orig_hash = &iter->ops->func_hash->filter_hash;
else
orig_hash = &iter->ops->func_hash->notrace_hash;
mutex_lock(&ftrace_lock);
old_hash = *orig_hash;
old_hash_ops.filter_hash = iter->ops->func_hash->filter_hash;
old_hash_ops.notrace_hash = iter->ops->func_hash->notrace_hash;
/* (1) 使用iter->hash来更新global_ops的filter_hash/notrace_hash */
ret = ftrace_hash_move(iter->ops, filter_hash,
orig_hash, iter->hash);
/* (2) 根据最新hash表的内容，更新_mcount插桩点
遍历全部ftrace_rec：
ref_cnt大于0的插桩点，更新成ftrace_caller()
ref_cnt等于0的插桩点，更新成nop
*/
if (!ret) {
ftrace_ops_update_code(iter->ops, &old_hash_ops);
free_ftrace_hash_rcu(old_hash);
}
mutex_unlock(&ftrace_lock);
}
mutex_unlock(&iter->ops->func_hash->regex_lock);
free_ftrace_hash(iter->hash);
kfree(iter);
return 0;
}
↓
static void ftrace_ops_update_code(struct ftrace_ops *ops,
struct ftrace_ops_hash *old_hash)
{
struct ftrace_ops *op;
if (!ftrace_enabled)
return;
if (ops->flags & FTRACE_OPS_FL_ENABLED) {
ftrace_run_modify_code(ops, FTRACE_UPDATE_CALLS, old_hash);
return;
}
/*
* If this is the shared global_ops filter, then we need to
* check if there is another ops that shares it, is enabled.
* If so, we still need to run the modify code.
*/
if (ops->func_hash != &global_ops.local_hash)
return;
do_for_each_ftrace_op(op, ftrace_ops_list) {
if (op->func_hash == &global_ops.local_hash &&
op->flags & FTRACE_OPS_FL_ENABLED) {
ftrace_run_modify_code(op, FTRACE_UPDATE_CALLS, old_hash);
/* Only need to do this once */
return;
}
} while_for_each_ftrace_op(op);
}1.2.7、配置function tracer的filter command
5、通过“set_ftrace_filter”设置function trcer的filter command。本质上向trace_probe_ops注册cmd，以及操作trace_probe_ops的filter_hash、notrace_hash。
虽然同样是操作set_ftrace_filter，但是配置filter和配置filter command是操作到不同的实体：
- 配置filter。操作的是global_ops的filter_hash/notrace_hash的内容；
- 配置filter command。是把command向trace_probe_ops注册，并且操作trace_probe_ops的filter_hash/notrace_hash的内容；
在配置filter command之前首先得注册command：
init_function_trace() -> init_func_cmd_traceon()
static int __init init_func_cmd_traceon(void)
{
int ret;
/* 注册：把command加入到ftrace_commands链表 */
ret = register_ftrace_command(&ftrace_traceoff_cmd);
if (ret)
return ret;
ret = register_ftrace_command(&ftrace_traceon_cmd);
if (ret)
goto out_free_traceoff;
ret = register_ftrace_command(&ftrace_stacktrace_cmd);
if (ret)
goto out_free_traceon;
ret = register_ftrace_command(&ftrace_dump_cmd);
if (ret)
goto out_free_stacktrace;
ret = register_ftrace_command(&ftrace_cpudump_cmd);
if (ret)
goto out_free_dump;
return 0;
}
static struct ftrace_func_command ftrace_traceon_cmd = {
.name = "traceon",
.func = ftrace_trace_onoff_callback,
};
我们以”traceon”command为例，继续分析上一节对“set_ftrace_filter”的文件操作：
static int ftrace_process_regex(struct ftrace_hash *hash,
char *buff, int len, int enable)
{
char *func, *command, *next = buff;
struct ftrace_func_command *p;
int ret = -EINVAL;
func = strsep(&next, ":");
/* (1.1) filter配置，更新iter->hash */
if (!next) {
ret = ftrace_match_records(hash, func, len);
if (!ret)
ret = -EINVAL;
if (ret < 0)
return ret;
return 0;
}
/* command found */
command = strsep(&next, ":");
/* (1.2) filter command配置，最后实际会操作到trace_probe_ops
和iter->hash、global_ops无关，下一小节中详述
*/
mutex_lock(&ftrace_cmd_mutex);
list_for_each_entry(p, &ftrace_commands, list) {
if (strcmp(p->name, command) == 0) {
ret = p->func(hash, func, command, next, enable);
goto out_unlock;
}
}
out_unlock:
mutex_unlock(&ftrace_cmd_mutex);
return ret;
}
↓
static int
ftrace_trace_onoff_callback(struct ftrace_hash *hash,
char *glob, char *cmd, char *param, int enable)
{
struct ftrace_probe_ops *ops;
/* we register both traceon and traceoff to this callback */
/* (1.2.1) 配置command的执行ops */
if (strcmp(cmd, "traceon") == 0)
ops = param ? &traceon_count_probe_ops : &traceon_probe_ops;
else
ops = param ? &traceoff_count_probe_ops : &traceoff_probe_ops;
/* (1.2.2) 注册command到trace_probe_ops */
return ftrace_trace_probe_callback(ops, hash, glob, cmd,
param, enable);
}
↓
static int
ftrace_trace_probe_callback(struct ftrace_probe_ops *ops,
struct ftrace_hash *hash, char *glob,
char *cmd, char *param, int enable)
{
void *count = (void *)-1;
char *number;
int ret;
/* hash funcs only work with set_ftrace_filter */
if (!enable)
return -EINVAL;
/* (1.2.2.1) 如果命令是“!”，注销filter command */
if (glob[0] == '!') {
unregister_ftrace_function_probe_func(glob+1, ops);
return 0;
}
if (!param)
goto out_reg;
number = strsep(¶m, ":");
if (!strlen(number))
goto out_reg;
/*
* We use the callback data field (which is a pointer)
* as our counter.
*/
/* (1.2.2.2) 解析到filter command中的“count”字段 */
ret = kstrtoul(number, 0, (unsigned long *)&count);
if (ret)
return ret;
out_reg:
/* (1.2.2.3) 继续注册filter command */
ret = register_ftrace_function_probe(glob, ops, count);
return ret < 0 ? ret : 0;
}
↓
int
register_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
void *data)
{
struct ftrace_ops_hash old_hash_ops;
struct ftrace_func_probe *entry;
struct ftrace_glob func_g;
struct ftrace_hash **orig_hash = &trace_probe_ops.func_hash->filter_hash;
struct ftrace_hash *old_hash = *orig_hash;
struct ftrace_hash *hash;
struct ftrace_page *pg;
struct dyn_ftrace *rec;
int not;
unsigned long key;
int count = 0;
int ret;
/* (1.2.2.3.1) filter command中函数名部分的解析 */
func_g.type = filter_parse_regex(glob, strlen(glob),
&func_g.search, ¬);
func_g.len = strlen(func_g.search);
/* we do not support '!' for function probes */
if (WARN_ON(not))
return -EINVAL;
mutex_lock(&trace_probe_ops.func_hash->regex_lock);
old_hash_ops.filter_hash = old_hash;
/* Probes only have filters */
old_hash_ops.notrace_hash = NULL;
/* (1.2.2.3.1) 将trace_probe_ops的filter_hash拷贝到临时hash表 */
hash = alloc_and_copy_ftrace_hash(FTRACE_HASH_DEFAULT_BITS, old_hash);
if (!hash) {
count = -ENOMEM;
goto out;
}
if (unlikely(ftrace_disabled)) {
count = -ENODEV;
goto out;
}
mutex_lock(&ftrace_lock);
/* 遍历ftrace_rec */
do_for_each_ftrace_rec(pg, rec) {
if (!ftrace_match_record(rec, &func_g, NULL, 0))
continue;
entry = kmalloc(sizeof(*entry), GFP_KERNEL);
if (!entry) {
/* If we did not process any, then return error */
if (!count)
count = -ENOMEM;
goto out_unlock;
}
count++;
entry->data = data;
/*
* The caller might want to do something special
* for each function we find. We call the callback
* to give the caller an opportunity to do so.
*/
if (ops->init) {
if (ops->init(ops, rec->ip, &entry->data) < 0) {
/* caller does not like this func */
kfree(entry);
continue;
}
}
/* (1.2.2.3.3) 如果当前ip符合当前函数filter规则，加入到临时hash表 */
ret = enter_record(hash, rec, 0);
if (ret < 0) {
kfree(entry);
count = ret;
goto out_unlock;
}
/* (1.2.2.3.4) 把command的操作和对应ip组合成entry，加入到另外一张hash表ftrace_func_hash */
entry->ops = ops;
entry->ip = rec->ip;
key = hash_long(entry->ip, FTRACE_HASH_BITS);
hlist_add_head_rcu(&entry->node, &ftrace_func_hash[key]);
} while_for_each_ftrace_rec();
/* (1.2.2.3.5) 把临时hash表更新到trace_probe_ops的filter_hash中 */
ret = ftrace_hash_move(&trace_probe_ops, 1, orig_hash, hash);
/* (1.2.2.3.6) 如果trace_probe_ops已经注册，根据hash表的更新来更新_mcount插桩点
如果trace_probe_ops没有注册，注册并更新_mcount插桩点
*/
__enable_ftrace_function_probe(&old_hash_ops);
if (!ret)
free_ftrace_hash_rcu(old_hash);
else
count = ret;
out_unlock:
mutex_unlock(&ftrace_lock);
out:
mutex_unlock(&trace_probe_ops.func_hash->regex_lock);
free_ftrace_hash(hash);
return count;
}
trace_probe_ops在被调用的时候，执行ftrace_func_hash中的filter command：
ftrace_caller() -> ftrace_ops_list_func() -> __ftrace_ops_list_func()
static inline void
__ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *ignored, struct pt_regs *regs)
{
struct ftrace_ops *op;
int bit;
bit = trace_test_and_set_recursion(TRACE_LIST_START, TRACE_LIST_MAX);
if (bit < 0)
return;
/*
* Some of the ops may be dynamically allocated,
* they must be freed after a synchronize_sched().
*/
preempt_disable_notrace();
/* 遍历ftrace_ops_list链表，
在当前ip满足hash的情况下，逐个执行ftrace_ops->func()
*/
do_for_each_ftrace_op(op, ftrace_ops_list) {
if (ftrace_ops_test(op, ip, regs)) {
if (FTRACE_WARN_ON(!op->func)) {
pr_warn("op=%p %pS\n", op, op);
goto out;
}
op->func(ip, parent_ip, op, regs);
}
} while_for_each_ftrace_op(op);
out:
preempt_enable_notrace();
trace_clear_recursion(bit);
}
↓
static struct ftrace_ops trace_probe_ops __read_mostly =
{
.func = function_trace_probe_call,
.flags = FTRACE_OPS_FL_INITIALIZED,
INIT_OPS_HASH(trace_probe_ops)
};
static void function_trace_probe_call(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *op, struct pt_regs *pt_regs)
{
struct ftrace_func_probe *entry;
struct hlist_head *hhd;
unsigned long key;
key = hash_long(ip, FTRACE_HASH_BITS);
hhd = &ftrace_func_hash[key];
if (hlist_empty(hhd))
return;
/*
* Disable preemption for these calls to prevent a RCU grace
* period. This syncs the hash iteration and freeing of items
* on the hash. rcu_read_lock is too dangerous here.
*/
preempt_disable_notrace();
/* 逐个执行ftrace_func_hash表中，ip为本ip的filter command */
hlist_for_each_entry_rcu_notrace(entry, hhd, node) {
if (entry->ip == ip)
entry->ops->func(ip, parent_ip, &entry->data);
}
preempt_enable_notrace();
}
1.3、数据存入
function tracer的数据存入的路径为：
ftrace_caller() -> ftrace_ops_list_func() -> __ftrace_ops_list_func() -> global_ops->func() -> function_trace_call()：
static void
function_trace_call(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *op, struct pt_regs *pt_regs)
{
struct trace_array *tr = op->private;
struct trace_array_cpu *data;
unsigned long flags;
int bit;
int cpu;
int pc;
if (unlikely(!tr->function_enabled))
return;
pc = preempt_count();
preempt_disable_notrace();
bit = trace_test_and_set_recursion(TRACE_FTRACE_START, TRACE_FTRACE_MAX);
if (bit < 0)
goto out;
cpu = smp_processor_id();
data = per_cpu_ptr(tr->trace_buffer.data, cpu);
if (!atomic_read(&data->disabled)) {
local_save_flags(flags);
trace_function(tr, ip, parent_ip, flags, pc);
}
trace_clear_recursion(bit);
out:
preempt_enable_notrace();
}
↓
void
trace_function(struct trace_array *tr,
unsigned long ip, unsigned long parent_ip, unsigned long flags,
int pc)
{
struct trace_event_call *call = &event_function;
struct ring_buffer *buffer = tr->trace_buffer.buffer;
struct ring_buffer_event *event;
struct ftrace_entry *entry;
/* (1) 从ringbuffer中分配空间
type = TRACE_FN
*/
event = trace_buffer_lock_reserve(buffer, TRACE_FN, sizeof(*entry),
flags, pc);
if (!event)
return;
entry = ring_buffer_event_data(event);
/* (2) 存入function tracer自定义的trace数据：ip、parent_ip */
entry->ip = ip;
entry->parent_ip = parent_ip;
if (!call_filter_check_discard(call, entry, buffer, event))
__buffer_unlock_commit(buffer, event);
}1.3.1、数据格式
function tracer自定义的trace数据非常简单：ip、parent_ip
1.3.2、filter
关于filter和filter command的配置在1.2.2、插桩点的动态管理一节已经讲得非常详细了，这里就不再重复。
1.4、数据读出
从trace文件读出的function tracer默认数据格式为：
# cat trace
# tracer: function
#
# entries-in-buffer/entries-written: 36/36 #P:8
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
sh-18361 [001] ...1 663922.156238: schedule_hrtimeout_range <-poll_schedule_timeout
sh-18361 [001] ...1 663922.156251: schedule_hrtimeout_range_clock <-schedule_hrtimeout_range
<idle>-0 [003] .n.2 663922.156660: schedule_preempt_disabled <-cpu_startup_entry
->transport-5191 [002] ...1 663922.157592: schedule_timeout <-wait_for_common
adbd-5189 [002] ...1 663922.158219: schedule_hrtimeout_range <-poll_schedule_timeout
adbd-5189 [002] ...1 663922.158222: schedule_hrtimeout_range_clock <-schedule_hrtimeout_range
<idle>-0 [001] .n.2 663922.158342: schedule_preempt_disabled <-cpu_startup_entry
->transport-5191 [001] ...1 663922.159407: schedule_timeout <-unix_stream_read_generic
<-transport-5192 [001] ...1 663922.159904: schedule_timeout <-wait_for_common
->transport-5191 [001] ...1 663922.160413: schedule_timeout <-unix_stream_read_generic
adbd-5189 [001] ...1 663922.160895: schedule_hrtimeout_range <-poll_schedule_timeout
adbd-5189 [001] ...1 663922.160898: schedule_hrtimeout_range_clock <-schedule_hrtimeout_range
<idle>-0 [002] .n.2 663922.163694: schedule_preempt_disabled <-cpu_startup_entry
<idle>-0 [003] .n.2 663922.175958: schedule_preempt_disabled <-cpu_startup_entry
ndroid.systemu-2200 [003] ...1 663922.179945: schedule_hrtimeout_range <-SyS_epoll_wait
ndroid.systemu-2200 [003] ...1 663922.179950: schedule_hrtimeout_range_clock <-schedule_hrtimeout_range
<idle>-0 [003] .n.2 663922.181418: schedule_preempt_disabled <-cpu_startup_entry
<idle>-0 [002] .n.2 663922.181584: schedule_preempt_disabled <-cpu_startup_entry
<idle>-0 [002] .n.2 663922.200878: schedule_preempt_disabled <-cpu_startup_entry
<idle>-0 [001] .n.2 663922.203506: schedule_preempt_disabled <-cpu_startup_entry
rcu_preempt-7 [002] ...1 663922.203519: schedule_timeout <-rcu_gp_kthread
ndroid.systemu-2200 [002] ...1 663922.205619: schedule_hrtimeout_range <-SyS_epoll_wait
ndroid.systemu-2200 [002] ...1 663922.205624: schedule_hrtimeout_range_clock <-schedule_hrtimeout_range
<idle>-0 [003] .n.2 663922.208538: schedule_preempt_disabled <-cpu_startup_entry
<idle>-0 [002] .n.2 663922.213243: schedule_preempt_disabled <-cpu_startup_entry
<idle>-0 [003] .n.2 663922.217986: schedule_preempt_disabled <-cpu_startup_entry
<idle>-0 [003] .n.2 663922.227857: schedule_preempt_disabled <-cpu_startup_entry
ndroid.systemu-2200 [003] ...1 663922.231819: schedule_hrtimeout_range <-SyS_epoll_wait
ndroid.systemu-2200 [003] ...1 663922.231824: schedule_hrtimeout_range_clock <-schedule_hrtimeout_range
<idle>-0 [002] .n.2 663922.234282: schedule_preempt_disabled <-cpu_startup_entry
<idle>-0 [001] .n.2 663922.246355: schedule_preempt_disabled <-cpu_startup_entry
<idle>-0 [002] .n.2 663922.251360: schedule_preempt_disabled <-cpu_startup_entry
ndroid.systemu-2200 [002] ...1 663922.255168: schedule_hrtimeout_range <-SyS_epoll_wait
ndroid.systemu-2200 [002] ...1 663922.255172: schedule_hrtimeout_range_clock <-schedule_hrtimeout_range
<idle>-0 [003] .n.2 663922.256775: schedule_preempt_disabled <-cpu_startup_entry
<idle>-0 [001] .n.2 663922.257253: schedule_preempt_disabled <-cpu_startup_entry
在kernel/trace/trace_ouput.c文件中，注册了系统默认的几种trace_event。function tracer使用TRACE_FN类型的trace_fn_event：
static struct trace_event *events[] __initdata = {
&trace_fn_event,
&trace_graph_ent_event,
&trace_graph_ret_event,
&trace_ctx_event,
&trace_wake_event,
&trace_stack_event,
&trace_user_stack_event,
&trace_bputs_event,
&trace_bprint_event,
&trace_print_event,
NULL
};
__init static int init_events(void)
{
struct trace_event *event;
int i, ret;
for (i = 0; events[i]; i++) {
event = events[i];
ret = register_trace_event(event);
if (!ret) {
printk(KERN_WARNING "event %d failed to register\n",
event->type);
WARN_ON_ONCE(1);
}
}
return 0;
}
|→
static struct trace_event_functions trace_fn_funcs = {
.trace = trace_fn_trace,
.raw = trace_fn_raw,
.hex = trace_fn_hex,
.binary = trace_fn_bin,
};
static struct trace_event trace_fn_event = {
.type = TRACE_FN,
.funcs = &trace_fn_funcs,
};在数据读出时，会调用到event对应的event->funcs->trace()函数，seq_read() -> s_show() -> print_trace_line() -> print_trace_fmt() -> event->funcs->trace()：
TRACE_FN，event->funcs->trace()对应trace_fn_trace()：
/* TRACE_FN */
static enum print_line_t trace_fn_trace(struct trace_iterator *iter, int flags,
struct trace_event *event)
{
struct ftrace_entry *field;
struct trace_seq *s = &iter->seq;
trace_assign_type(field, iter->ent);
/* (1) 打印出本ip对应的符号 */
seq_print_ip_sym(s, field->ip, flags);
/* (2) 如果trace option运行，打印出父ip对应的符号 */
if ((flags & TRACE_ITER_PRINT_PARENT) && field->parent_ip) {
trace_seq_puts(s, " <-");
seq_print_ip_sym(s, field->parent_ip, flags);
}
trace_seq_putc(s, '\n');
return trace_handle_return(s);
}2、function_graph tracer
function_graph tracer从function tracer发展而来，function tracer使用“_mcount”插桩可以跟踪到每个函数的调用入口，而function_graph tracer即可以跟踪到函数的入口还可以跟踪到函数的返回。
2.1、插桩原理
如上图：一切的关键是在入口桩函数被调用时，修改了func()的返回地址，不是返回到func’s parent()函数继续去执行，而是返回到reurn桩函数return_to_handler()中。return_to_handler()中执行完自己的return处理函数以后，再把返回地址恢复成func’s parent中的地址，返回继续执行原有的路径。
原本的入口处插桩，只能追踪到函数的切换。现在入口、出口同时插桩，还能获得函数的执行时长，做更多的分析。
2.2、插桩点管理
function_graph tracer插桩点动态管理的原理：
- 1、每个“bl _mcount”的插桩点ip对应一个每个插桩点对应一个dyn_ftrace结构。dyn_ftrace->flags的低26bit用来表示引用计数，如果有ftrcae_ops会操作到该ip，引用计数会加1。如果ref_cnt大于0，插桩点就需要使能了，把其替换为“bl ftrace_caller”；
- 2、ftrcae_ops采用hash表来表达对ip的引用，一个ftrcae_ops有两张hash表filter_hash和notrace_hash，综合的结果就是对ip的引用。function_graph tracer模式时，有一个的ftrcae_ops：graph_ops。并且graph_ops的hash表是直接引用global_ops的hash表，这样做的目的是可以保留function tracer模式时的filter配置。如果引用到ip，都会造成ip的1级插桩点被替换为“bl ftrace_caller”；
- 3、通过设置“set_ftrace_filter/set_ftrace_notrace”会造成对global_ops的filter_hash/notrace_hash的配置，它的作用相当于1级过滤。在function_graph tracer模式时，通过2级过滤的函数才能记录trace信息：1级过滤(函数必须是“set_ftrace_filter/set_ftrace_notrace”配置中允许的函数)，2级过滤(函数必须是“set_graph_function/set_graph_notrace”配置中允许的函数或者是被它们调用的子函数)；
- 4、通过设置“set_graph_function/set_graph_notrace”可以配置2级过滤，实际上是配置到ftrace_graph_funcs[]/ftrace_graph_notrace_funcs[]表中。
- 5、ftrace_caller()有两个2级插桩点：ftrace_call、ftrace_graph_call。在function tracer模式时，只有ftrace_graph_call被设置成“bl ftrace_graph_caller”；
- 6、ftrace_graph_caller()的工作就是设置环境，让函数在入口处调用trace_graph_entry()，在返回处调用trace_graph_return()；
- 7、在trace_graph_entry()中会进行2级过滤的合法性判断，函数必须是“set_graph_function/set_graph_notrace”配置中允许的函数或者是被它们调用的子函数才能继续执行，否则出错返回后面的trace_graph_return()都不会被执行。
- 8、trace_graph_entry()、trace_graph_return()的工作都是记录trace信息：ip+时间戳；
在以下场景时，function_graph会涉及到对各个插桩点的动态修改：
- tracer的使能。当使用“echo xxx_tracer > current_tracer”时，会关闭旧的current tracer并使能新的tracer。典型的包括function tracer合入function_graph tracer；
- function_graph filter的配置。使用“echo function_name > set_ftrace_filter/set_ftrace_notrace”，可以配置部分function被trace，而不是所有function被trace；
- function filter的配置。使用“echo function_name > set_graph_function/set_graph_notrace”，可以配置部分function被trace，而不是所有function被trace；
下面我们看看具体场景下的代码实现细节：
2.2.1、function_graph tracer使能
参考“1.2.5、function tracer使能”这一节，tracer的使能最后调用的是tracer->init()函数。
对function_graph tracer来说，调用的是graph_trace_init()：
static struct tracer graph_trace __tracer_data = {
.name = "function_graph",
.update_thresh = graph_trace_update_thresh,
.open = graph_trace_open,
.pipe_open = graph_trace_open,
.close = graph_trace_close,
.pipe_close = graph_trace_close,
.init = graph_trace_init,
.reset = graph_trace_reset,
.print_line = print_graph_function,
.print_header = print_graph_headers,
.flags = &tracer_flags,
.set_flag = func_graph_set_flag,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_function_graph,
#endif
};
↓
static int graph_trace_init(struct trace_array *tr)
{
int ret;
set_graph_array(tr);
if (tracing_thresh)
ret = register_ftrace_graph(&trace_graph_thresh_return,
&trace_graph_thresh_entry);
else
ret = register_ftrace_graph(&trace_graph_return,
&trace_graph_entry);
if (ret)
return ret;
tracing_start_cmdline_record();
return 0;
}
↓
/* function_graph tracer的专用ftrace_ops：graph_ops */
static struct ftrace_ops graph_ops = {
.func = ftrace_stub,
.flags = FTRACE_OPS_FL_RECURSION_SAFE |
FTRACE_OPS_FL_INITIALIZED |
FTRACE_OPS_FL_PID |
FTRACE_OPS_FL_STUB,
#ifdef FTRACE_GRAPH_TRAMP_ADDR
.trampoline = FTRACE_GRAPH_TRAMP_ADDR,
/* trampoline_size is only needed for dynamically allocated tramps */
#endif
ASSIGN_OPS_HASH(graph_ops, &global_ops.local_hash) /* graph_ops共用global_ops的hash表，这样可以支持"set_ftrace_filter"的配置 */
};
int register_ftrace_graph(trace_func_graph_ret_t retfunc,
trace_func_graph_ent_t entryfunc)
{
int ret = 0;
mutex_lock(&ftrace_lock);
/* we currently allow only one tracer registered at a time */
if (ftrace_graph_active) {
ret = -EBUSY;
goto out;
}
register_pm_notifier(&ftrace_suspend_notifier);
ftrace_graph_active++;
ret = start_graph_tracing();
if (ret) {
ftrace_graph_active--;
goto out;
}
/* (1) 给ftrace_graph_entry、ftrace_graph_return指针赋值 */
ftrace_graph_return = retfunc;
/*
* Update the indirect function to the entryfunc, and the
* function that gets called to the entry_test first. Then
* call the update fgraph entry function to determine if
* the entryfunc should be called directly or not.
*/
__ftrace_graph_entry = entryfunc;
ftrace_graph_entry = ftrace_graph_entry_test;
update_function_graph_func();
/* (2) 注册graph_ops:
1、将graph_ops加入到ftrace_ops_list链表；
2、根据graph_ops的hash表，更新_mcount插桩点；
3、更新ftrace_graph_call插桩点为ftrace_graph_caller()
*/
ret = ftrace_startup(&graph_ops, FTRACE_START_FUNC_RET);
out:
mutex_unlock(&ftrace_lock);
return ret;
}
2.2.2、配置function filter(1级过滤)
因为function_graph tracer的graph_ops继续共用global_ops的hash表，使用“set_ftrace_filter/set_ftrace_notrace”接口可以配置global_ops的filter_hash/notrace_hash表。所以可以继续使用“set_ftrace_filter/set_ftrace_notrace”来配置function_graph tracer的filter。
function_graph tracer还可以使用“set_graph_function/set_graph_notrace”接口来配置过滤，需要两种过滤条件都满足的函数才能被trace。所以我们命名当前过滤为1级过滤。
具体的代码解析参考： 1.2.6、配置function tracer的filter
2.2.3、配置function_graph filter(2级过滤)
通过设置“set_graph_function/set_graph_notrace”可以配置2级过滤，实际上是配置到ftrace_graph_funcs[]/ftrace_graph_notrace_funcs[]表中。
trace_create_file("set_graph_function", 0444, d_tracer,
NULL,
&ftrace_graph_fops);
trace_create_file("set_graph_notrace", 0444, d_tracer,
NULL,
&ftrace_graph_notrace_fops);
static const struct file_operations ftrace_graph_fops = {
.open = ftrace_graph_open,
.read = seq_read,
.write = ftrace_graph_write,
.llseek = tracing_lseek,
.release = ftrace_graph_release,
};
↓
static int
ftrace_graph_open(struct inode *inode, struct file *file)
{
struct ftrace_graph_data *fgd;
if (unlikely(ftrace_disabled))
return -ENODEV;
fgd = kmalloc(sizeof(*fgd), GFP_KERNEL);
if (fgd == NULL)
return -ENOMEM;
fgd->table = ftrace_graph_funcs;
fgd->size = FTRACE_GRAPH_MAX_FUNCS;
fgd->count = &ftrace_graph_count;
fgd->seq_ops = &ftrace_graph_seq_ops;
return __ftrace_graph_open(inode, file, fgd);
}
static ssize_t
ftrace_graph_write(struct file *file, const char __user *ubuf,
size_t cnt, loff_t *ppos)
{
struct trace_parser parser;
ssize_t read, ret = 0;
struct ftrace_graph_data *fgd = file->private_data;
if (!cnt)
return 0;
if (trace_parser_get_init(&parser, FTRACE_BUFF_MAX))
return -ENOMEM;
read = trace_get_user(&parser, ubuf, cnt, ppos);
if (read >= 0 && trace_parser_loaded((&parser))) {
parser.buffer[parser.idx] = 0;
mutex_lock(&graph_lock);
/* we allow only one expression at a time */
/* 根据filter设置条件，设置ftrace_graph_funcs[]表 */
ret = ftrace_set_func(fgd->table, fgd->count, fgd->size,
parser.buffer);
mutex_unlock(&graph_lock);
}
if (!ret)
ret = read;
trace_parser_put(&parser);
return ret;
}在trace_graph_entry()中会进行2级过滤的合法性判断，函数必须是“set_graph_function/set_graph_notrace”配置中允许的函数或者是被它们调用的子函数才能继续执行，否则出错返回后面的trace_graph_return()都不会被执行。
int trace_graph_entry(struct ftrace_graph_ent *trace)
{
struct trace_array *tr = graph_array;
struct trace_array_cpu *data;
unsigned long flags;
long disabled;
int ret;
int cpu;
int pc;
if (!ftrace_trace_task(current))
return 0;
/* trace it when it is-nested-in or is a function enabled. */
/* ftrace_graph_addr(trace->func) // 函数必须是“set_graph_function/set_graph_notrace”配置中允许的函数
trace->depth // 或者是被它们调用的子函数
*/
if ((!(trace->depth || ftrace_graph_addr(trace->func)) ||
ftrace_graph_ignore_irqs()) || (trace->depth < 0) ||
(max_depth && trace->depth >= max_depth))
return 0;
/*
* Do not trace a function if it's filtered by set_graph_notrace.
* Make the index of ret stack negative to indicate that it should
* ignore further functions. But it needs its own ret stack entry
* to recover the original index in order to continue tracing after
* returning from the function.
*/
if (ftrace_graph_notrace_addr(trace->func))
return 1;
local_irq_save(flags);
cpu = raw_smp_processor_id();
data = per_cpu_ptr(tr->trace_buffer.data, cpu);
disabled = atomic_inc_return(&data->disabled);
if (likely(disabled == 1)) {
pc = preempt_count();
ret = __trace_graph_entry(tr, trace, flags, pc);
} else {
ret = 0;
}
atomic_dec(&data->disabled);
local_irq_restore(flags);
return ret;
}
↓
static inline int ftrace_graph_addr(unsigned long addr)
{
int i;
if (!ftrace_graph_count)
return 1;
/* 查找地址是否在ftrace_graph_funcs[]表中 */
for (i = 0; i < ftrace_graph_count; i++) {
if (addr == ftrace_graph_funcs[i]) {
/*
* If no irqs are to be traced, but a set_graph_function
* is set, and called by an interrupt handler, we still
* want to trace it.
*/
if (in_irq())
trace_recursion_set(TRACE_IRQ_BIT);
else
trace_recursion_clear(TRACE_IRQ_BIT);
return 1;
}
}
return 0;
}2.3、数据存入
和function tracer不一样的是，function_graph在进入函数和返回函数时都有trace数据存入。
2.3.1、trace_graph_entry()
函数入口的存入：trace_graph_entry() -> __trace_graph_entry()：
int __trace_graph_entry(struct trace_array *tr,
struct ftrace_graph_ent *trace,
unsigned long flags,
int pc)
{
struct trace_event_call *call = &event_funcgraph_entry;
struct ring_buffer_event *event;
struct ring_buffer *buffer = tr->trace_buffer.buffer;
struct ftrace_graph_ent_entry *entry;
event = trace_buffer_lock_reserve(buffer, TRACE_GRAPH_ENT,
sizeof(*entry), flags, pc);
if (!event)
return 0;
entry = ring_buffer_event_data(event);
entry->graph_ent = *trace;
if (!call_filter_check_discard(call, entry, buffer, event))
__buffer_unlock_commit(buffer, event);
return 1;
}2.3.2、trace_graph_return()
函数返回的存入：trace_graph_return() -> __trace_graph_return()：
void __trace_graph_return(struct trace_array *tr,
struct ftrace_graph_ret *trace,
unsigned long flags,
int pc)
{
struct trace_event_call *call = &event_funcgraph_exit;
struct ring_buffer_event *event;
struct ring_buffer *buffer = tr->trace_buffer.buffer;
struct ftrace_graph_ret_entry *entry;
event = trace_buffer_lock_reserve(buffer, TRACE_GRAPH_RET,
sizeof(*entry), flags, pc);
if (!event)
return;
entry = ring_buffer_event_data(event);
entry->ret = *trace;
if (!call_filter_check_discard(call, entry, buffer, event))
__buffer_unlock_commit(buffer, event);
}2.3.3、filter
参见“2.2.2、配置function filter(1级过滤)”和“2.2.3、配置function_graph filter(2级过滤)”。
2.4、数据读出
从trace文件读出的function_graph tracer默认数据格式为：(显示function_graph中设置的函数或者是被它们调用的子函数)
# cat trace
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
0) | tty_open() {
0) 1.563 us | nonseekable_open();
0) | tty_alloc_file() {
0) | kmem_cache_alloc_trace() {
0) | __might_sleep() {
0) 0.417 us | ___might_sleep();
0) 4.791 us | }
0) 1.302 us | preempt_count_add();
0) 1.250 us | preempt_count_sub();
0) | __slab_alloc.isra.60.constprop.62() {
0) | ___slab_alloc.constprop.63() {
0) | _raw_spin_lock() {
0) 1.250 us | preempt_count_add();
0) 0.520 us | do_raw_spin_trylock();
0) 9.531 us | }
0) 0.781 us | preempt_count_add();
0) 0.469 us | preempt_count_sub();
0) | _raw_spin_unlock() {
0) 0.521 us | do_raw_spin_unlock();
0) 1.614 us | preempt_count_sub();
0) 9.584 us | }
0) | alloc_debug_processing() {
0) | check_slab() {
0) 1.198 us | slab_pad_check.part.52();
0) 5.990 us | }
0) | check_object() {
0) 1.719 us | check_bytes_and_report();
0) 0.521 us | check_bytes_and_report();
0) 2.448 us | check_bytes_and_report();
0) 0.469 us | check_bytes_and_report();
0) 1.927 us | check_bytes_and_report();
0) + 29.843 us | }
0) | set_track() {
在通过trace文件读出数据时，如果tracer的print_line()函数有定义，则会调用print_line()函数进行解析。而不再去使用event->funcs->trace()函数。
1、读操作时，seq_read() -> s_show() -> print_trace_line() -> tracer->print_line()：
static struct tracer graph_trace __tracer_data = {
.name = "function_graph",
.update_thresh = graph_trace_update_thresh,
.open = graph_trace_open,
.pipe_open = graph_trace_open,
.close = graph_trace_close,
.pipe_close = graph_trace_close,
.init = graph_trace_init,
.reset = graph_trace_reset,
.print_line = print_graph_function,
.print_header = print_graph_headers,
.flags = &tracer_flags,
.set_flag = func_graph_set_flag,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_function_graph,
#endif
};
↓
static enum print_line_t
print_graph_function(struct trace_iterator *iter)
{
return print_graph_function_flags(iter, tracer_flags.val);
}
↓
enum print_line_t
print_graph_function_flags(struct trace_iterator *iter, u32 flags)
{
struct ftrace_graph_ent_entry *field;
struct fgraph_data *data = iter->private;
struct trace_entry *entry = iter->ent;
struct trace_seq *s = &iter->seq;
int cpu = iter->cpu;
int ret;
if (flags & TRACE_GRAPH_PRINT_FLAT)
return TRACE_TYPE_UNHANDLED;
if (data && per_cpu_ptr(data->cpu_data, cpu)->ignore) {
per_cpu_ptr(data->cpu_data, cpu)->ignore = 0;
return TRACE_TYPE_HANDLED;
}
/*
* If the last output failed, there's a possibility we need
* to print out the missing entry which would never go out.
*/
if (data && data->failed) {
field = &data->ent;
iter->cpu = data->cpu;
ret = print_graph_entry(field, s, iter, flags);
if (ret == TRACE_TYPE_HANDLED && iter->cpu != cpu) {
per_cpu_ptr(data->cpu_data, iter->cpu)->ignore = 1;
ret = TRACE_TYPE_NO_CONSUME;
}
iter->cpu = cpu;
return ret;
}
switch (entry->type) {
/* (1) 打印TRACE_GRAPH_ENT类型的entry */
case TRACE_GRAPH_ENT: {
/*
* print_graph_entry() may consume the current event,
* thus @field may become invalid, so we need to save it.
* sizeof(struct ftrace_graph_ent_entry) is very small,
* it can be safely saved at the stack.
*/
struct ftrace_graph_ent_entry saved;
trace_assign_type(field, entry);
saved = *field;
return print_graph_entry(&saved, s, iter, flags);
}
/* (2) 打印TRACE_GRAPH_RET类型的entry */
case TRACE_GRAPH_RET: {
struct ftrace_graph_ret_entry *field;
trace_assign_type(field, entry);
return print_graph_return(&field->ret, s, entry, iter, flags);
}
/* (3) TRACE_STACK、TRACE_FN这两种类型的entry，graph无法处理，返回交由系统打印 */
case TRACE_STACK:
case TRACE_FN:
/* dont trace stack and functions as comments */
return TRACE_TYPE_UNHANDLED;
/* (4) 打印其他类型的entry */
default:
return print_graph_comment(s, entry, iter, flags);
}
return TRACE_TYPE_HANDLED;
}2、在第一次读操作时，会打印header。seq_read() -> s_show() -> print_trace_line() -> tracer->print_header()：
static void print_graph_headers(struct seq_file *s)
{
print_graph_headers_flags(s, tracer_flags.val);
}
↓
void print_graph_headers_flags(struct seq_file *s, u32 flags)
{
struct trace_iterator *iter = s->private;
struct trace_array *tr = iter->tr;
if (flags & TRACE_GRAPH_PRINT_FLAT) {
trace_default_header(s);
return;
}
if (!(tr->trace_flags & TRACE_ITER_CONTEXT_INFO))
return;
if (tr->trace_flags & TRACE_ITER_LATENCY_FMT) {
/* print nothing if the buffers are empty */
if (trace_empty(iter))
return;
print_trace_header(s, iter);
}
__print_graph_headers_flags(tr, s, flags);
}
3、在open的时候，也会调用到tracer的open函数。tracing_open() -> __tracing_open() -> tracer->open()：
void graph_trace_open(struct trace_iterator *iter)
{
/* pid and depth on the last trace processed */
struct fgraph_data *data;
gfp_t gfpflags;
int cpu;
iter->private = NULL;
/* We can be called in atomic context via ftrace_dump() */
gfpflags = (in_atomic() || irqs_disabled()) ? GFP_ATOMIC : GFP_KERNEL;
data = kzalloc(sizeof(*data), gfpflags);
if (!data)
goto out_err;
data->cpu_data = alloc_percpu_gfp(struct fgraph_cpu_data, gfpflags);
if (!data->cpu_data)
goto out_err_free;
for_each_possible_cpu(cpu) {
pid_t *pid = &(per_cpu_ptr(data->cpu_data, cpu)->last_pid);
int *depth = &(per_cpu_ptr(data->cpu_data, cpu)->depth);
int *ignore = &(per_cpu_ptr(data->cpu_data, cpu)->ignore);
int *depth_irq = &(per_cpu_ptr(data->cpu_data, cpu)->depth_irq);
*pid = -1;
*depth = 0;
*ignore = 0;
*depth_irq = -1;
}
iter->private = data;
return;
out_err_free:
kfree(data);
out_err:
pr_warning("function graph tracer: not enough memory\n");
}3、irqsoff tracer
irqsoff tracer用来追踪最大关中断时间。它的trace会提供几部分信息：
- 1、irqoff的最大时长:latency；
- 2、在最大irqoff这期间所有的function trace信息；
- 3、最后的irqon的函数回调信息；
3.1、插桩
irqsoff tracer的插桩方法，是直接在local_irq_enable()、local_irq_disable()中直接插入钩子函数trace_hardirqs_on()、trace_hardirqs_off()。
#ifdef CONFIG_TRACE_IRQFLAGS
#define local_irq_enable() \
do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0)
#define local_irq_disable() \
do { raw_local_irq_disable(); trace_hardirqs_off(); } while (0)
#define local_irq_save(flags) \
do { \
raw_local_irq_save(flags); \
trace_hardirqs_off(); \
} while (0)
#define local_irq_restore(flags) \
do { \
if (raw_irqs_disabled_flags(flags)) { \
raw_local_irq_restore(flags); \
trace_hardirqs_off(); \
} else { \
trace_hardirqs_on(); \
raw_local_irq_restore(flags); \
} \
} while (0)
#define safe_halt() \
do { \
trace_hardirqs_on(); \
raw_safe_halt(); \
} while (0)
#else /* !CONFIG_TRACE_IRQFLAGS */3.1.1、trace_hardirqs_on/off()
local_irq_disable() -> trace_hardirqs_off()：
void trace_hardirqs_off(void)
{
if (!preempt_trace() && irq_trace())
start_critical_timing(CALLER_ADDR0, CALLER_ADDR1);
}
↓
static inline void
start_critical_timing(unsigned long ip, unsigned long parent_ip)
{
int cpu;
struct trace_array *tr = irqsoff_trace;
struct trace_array_cpu *data;
unsigned long flags;
if (!tracer_enabled || !tracing_is_enabled())
return;
cpu = raw_smp_processor_id();
/* (1) 如果已经开始tracing，中间的重复关中断操作被忽略 */
if (per_cpu(tracing_cpu, cpu))
return;
data = per_cpu_ptr(tr->trace_buffer.data, cpu);
if (unlikely(!data) || atomic_read(&data->disabled))
return;
atomic_inc(&data->disabled);
/* (2) 记录trace的开始时间 */
data->critical_sequence = max_sequence;
data->preempt_timestamp = ftrace_now(cpu);
data->critical_start = parent_ip ? : ip;
local_save_flags(flags);
/* (3) 记录一下当前的function trace信息 */
__trace_function(tr, ip, parent_ip, flags, preempt_count());
/* (4) 设置开始tracing标志
这是一个非常重要的标准，打开所有function trace的记录
*/
per_cpu(tracing_cpu, cpu) = 1;
atomic_dec(&data->disabled);
}local_irq_enable() -> trace_hardirqs_on()：
void trace_hardirqs_on(void)
{
if (!preempt_trace() && irq_trace())
stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1);
}
↓
static inline void
stop_critical_timing(unsigned long ip, unsigned long parent_ip)
{
int cpu;
struct trace_array *tr = irqsoff_trace;
struct trace_array_cpu *data;
unsigned long flags;
cpu = raw_smp_processor_id();
/* Always clear the tracing cpu on stopping the trace */
/* (1) 清除开始tracing标志
这是一个非常重要的标准，停止所有function trace的记录
*/
if (unlikely(per_cpu(tracing_cpu, cpu)))
per_cpu(tracing_cpu, cpu) = 0;
else
return;
if (!tracer_enabled || !tracing_is_enabled())
return;
data = per_cpu_ptr(tr->trace_buffer.data, cpu);
if (unlikely(!data) ||
!data->critical_start || atomic_read(&data->disabled))
return;
atomic_inc(&data->disabled);
/* (2) 记录一下当前的function trace信息 */
local_save_flags(flags);
__trace_function(tr, ip, parent_ip, flags, preempt_count());
/* (3) check当前的irqoff持续时长是不是最大的latency */
check_critical_timing(tr, data, parent_ip ? : ip, cpu);
data->critical_start = 0;
atomic_dec(&data->disabled);
}
↓
static void
check_critical_timing(struct trace_array *tr,
struct trace_array_cpu *data,
unsigned long parent_ip,
int cpu)
{
cycle_t T0, T1, delta;
unsigned long flags;
int pc;
/* (3.1) 当前irqoff的持续时长 */
T0 = data->preempt_timestamp;
T1 = ftrace_now(cpu);
delta = T1-T0;
local_save_flags(flags);
pc = preempt_count();
/* (3.2) 判断是否是新的最大latency */
if (!report_latency(tr, delta))
goto out;
raw_spin_lock_irqsave(&max_trace_lock, flags);
/* check if we are still the max latency */
if (!report_latency(tr, delta))
goto out_unlock;
/* (3.3) 如果是最大latency：
记录一下当前的function trace信息
记录当前的stack信息
*/
__trace_function(tr, CALLER_ADDR0, parent_ip, flags, pc);
/* Skip 5 functions to get to the irq/preempt enable function */
__trace_stack(tr, flags, 5, pc);
if (data->critical_sequence != max_sequence)
goto out_unlock;
data->critical_end = parent_ip;
/* (3.4) ---------重要-----------------
这一步非常重要，主要做了以下工作：
1、把当前的trace buffer备份到max_buffer中
2、更新max_buffer中max_buf->time_start时间戳，这个记录了最大latency trace信息的起始位置
*/
if (likely(!is_tracing_stopped())) {
tr->max_latency = delta;
update_max_tr_single(tr, current, cpu);
}
max_sequence++;
out_unlock:
raw_spin_unlock_irqrestore(&max_trace_lock, flags);
out:
data->critical_sequence = max_sequence;
data->preempt_timestamp = ftrace_now(cpu);
__trace_function(tr, CALLER_ADDR0, parent_ip, flags, pc);
}
↓
void
update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu)
{
int ret;
if (tr->stop_count)
return;
WARN_ON_ONCE(!irqs_disabled());
if (!tr->allocated_snapshot) {
/* Only the nop tracer should hit this when disabling */
WARN_ON_ONCE(tr->current_trace != &nop_trace);
return;
}
arch_spin_lock(&tr->max_lock);
/* (3.4.1) swap trace_buffer和max_buffer，把包含最大latency过程的trace信息备份到max_buffer中 */
ret = ring_buffer_swap_cpu(tr->max_buffer.buffer, tr->trace_buffer.buffer, cpu);
if (ret == -EBUSY) {
/*
* We failed to swap the buffer due to a commit taking
* place on this CPU. We fail to record, but we reset
* the max trace buffer (no one writes directly to it)
* and flag that it failed.
*/
trace_array_printk_buf(tr->max_buffer.buffer, _THIS_IP_,
"Failed to swap buffers due to commit in progress\n");
}
WARN_ON_ONCE(ret && ret != -EAGAIN && ret != -EBUSY);
/* (3.4.2) 已经把包含最大latency过程的trace信息备份到max_buffer中了，
但是这个信息中包含了多次irqoff的trace信息，哪一次才是最大latency的信息呢？
使用max_buf->time_start来记录最大latency的起始时间
max_buf->time_start = data->preempt_timestamp;
*/
__update_max_tr(tr, tsk, cpu);
arch_spin_unlock(&tr->max_lock);
}
3.1.2、irqoff trace信息的读取
参考上一节，最大latency的trace信息被备份到了max_buffer中了，且max_buf->time_start来记录最大latency的起始时间。
所以在trace读取irqoff trace信息时，需要从max_buffer读取。tracing_open() -> __tracing_open()：
static struct trace_iterator *
__tracing_open(struct inode *inode, struct file *file, bool snapshot)
{
#ifdef CONFIG_TRACER_MAX_TRACE
/* Currently only the top directory has a snapshot */
/* (1) 如果tracer的print_max被定义，从max_buffer从读取数据 */
if (tr->current_trace->print_max || snapshot)
iter->trace_buffer = &tr->max_buffer;
else
#endif
iter->trace_buffer = &tr->trace_buffer;
}
static struct tracer irqsoff_tracer __read_mostly =
{
.name = "irqsoff",
.init = irqsoff_tracer_init,
.reset = irqsoff_tracer_reset,
.start = irqsoff_tracer_start,
.stop = irqsoff_tracer_stop,
.print_max = true, /* irqoff tracer的print_max为true */
.print_header = irqsoff_print_header,
.print_line = irqsoff_print_line,
.flag_changed = irqsoff_flag_changed,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_irqsoff,
#endif
.open = irqsoff_trace_open,
.close = irqsoff_trace_close,
.allow_instances = true,
.use_max_tr = true,
};在读取时，还需要做时间同步只读取max_buf->time_start时间戳以后的数据。tracing_open() -> __tracing_open() -> tracing_iter_reset()：
void tracing_iter_reset(struct trace_iterator *iter, int cpu)
{
struct ring_buffer_event *event;
struct ring_buffer_iter *buf_iter;
unsigned long entries = 0;
u64 ts;
per_cpu_ptr(iter->trace_buffer->data, cpu)->skipped_entries = 0;
buf_iter = trace_buffer_iter(iter, cpu);
if (!buf_iter)
return;
ring_buffer_iter_reset(buf_iter);
/*
* We could have the case with the max latency tracers
* that a reset never took place on a cpu. This is evident
* by the timestamp being before the start of the buffer.
*/
/* (1) 对于时间戳小于time_start的trace数据全部丢弃掉，
只读取time_start时间戳以后的数据
*/
while ((event = ring_buffer_iter_peek(buf_iter, &ts))) {
if (ts >= iter->trace_buffer->time_start)
break;
entries++;
ring_buffer_read(buf_iter, NULL);
}
per_cpu_ptr(iter->trace_buffer->data, cpu)->skipped_entries = entries;
}3.1.3、irqsoff tracer的使能
- irqsoff tracer需要使用function trace或者function_graph trace来记录最大latency的中间函数调用过程。所以它会注册一个global_ops->func，或者使用graph_ops注册。
- trace数据的写入受trace_hardirqs_off()、trace_hardirqs_on()中配置的开关per_cpu(tracing_cpu, cpu)控制。在trace_hardirqs_off()时打开开关，在trace_hardirqs_on()时关闭开关，这样就记录下了irqoff过程中的具体函数调用过程。
参考“1.2.5、function tracer使能”这一节，tracer的使能最后调用的是tracer->init()函数。
对irqsoff tracer来说，调用的是irqsoff_tracer_init()：
static struct tracer irqsoff_tracer __read_mostly =
{
.name = "irqsoff",
.init = irqsoff_tracer_init,
.reset = irqsoff_tracer_reset,
.start = irqsoff_tracer_start,
.stop = irqsoff_tracer_stop,
.print_max = true,
.print_header = irqsoff_print_header,
.print_line = irqsoff_print_line,
.flag_changed = irqsoff_flag_changed,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_irqsoff,
#endif
.open = irqsoff_trace_open,
.close = irqsoff_trace_close,
.allow_instances = true,
.use_max_tr = true,
};
↓
static int irqsoff_tracer_init(struct trace_array *tr)
{
trace_type = TRACER_IRQS_OFF;
return __irqsoff_tracer_init(tr);
}
↓
static int __irqsoff_tracer_init(struct trace_array *tr)
{
if (irqsoff_busy)
return -EBUSY;
save_flags = tr->trace_flags;
/* non overwrite screws up the latency tracers */
set_tracer_flag(tr, TRACE_ITER_OVERWRITE, 1);
set_tracer_flag(tr, TRACE_ITER_LATENCY_FMT, 1);
tr->max_latency = 0;
irqsoff_trace = tr;
/* make sure that the tracer is visible */
smp_wmb();
tracing_reset_online_cpus(&tr->trace_buffer);
/* (1) 如果采用function trace模式来记录最大latency过程中的trace信息
global_ops->func = irqsoff_tracer_call()
*/
ftrace_init_array_ops(tr, irqsoff_tracer_call);
/* Only toplevel instance supports graph tracing */
/* (2) 选择使用 function trace模式 or function_graph trace模式 注册
默认是function trace模式
*/
if (start_irqsoff_tracer(tr, (tr->flags & TRACE_ARRAY_FL_GLOBAL &&
is_graph(tr))))
printk(KERN_ERR "failed to start irqsoff tracer\n");
irqsoff_busy = true;
return 0;
}
↓
start_irqsoff_tracer() -> register_irqsoff_function()
static int register_irqsoff_function(struct trace_array *tr, int graph, int set)
{
int ret;
/* 'set' is set if TRACE_ITER_FUNCTION is about to be set */
if (function_enabled || (!set && !(tr->trace_flags & TRACE_ITER_FUNCTION)))
return 0;
if (graph)
/* (2.1) function_graph trace模式注册 */
ret = register_ftrace_graph(&irqsoff_graph_return,
&irqsoff_graph_entry);
else
/* (2.2) function trace模式注册 */
ret = register_ftrace_function(tr->ops);
if (!ret)
function_enabled = true;
return ret;
}在记录trace数据时，需要判断per_cpu(tracing_cpu, cpu)开关。以function trace模式为例，我们来看看其irqsoff_tracer_call()函数：
static void
irqsoff_tracer_call(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *op, struct pt_regs *pt_regs)
{
struct trace_array *tr = irqsoff_trace;
struct trace_array_cpu *data;
unsigned long flags;
if (!func_prolog_dec(tr, &data, &flags))
return;
trace_function(tr, ip, parent_ip, flags, preempt_count());
atomic_dec(&data->disabled);
}
↓
static int func_prolog_dec(struct trace_array *tr,
struct trace_array_cpu **data,
unsigned long *flags)
{
long disabled;
int cpu;
/*
* Does not matter if we preempt. We test the flags
* afterward, to see if irqs are disabled or not.
* If we preempt and get a false positive, the flags
* test will fail.
*/
cpu = raw_smp_processor_id();
/* 对tracing_cpu开关的判断，由trace_hardirqs_off()、trace_hardirqs_on()函数控制 */
if (likely(!per_cpu(tracing_cpu, cpu)))
return 0;
local_save_flags(*flags);
/*
* Slight chance to get a false positive on tracing_cpu,
* although I'm starting to think there isn't a chance.
* Leave this for now just to be paranoid.
*/
if (!irqs_disabled_flags(*flags) && !preempt_count())
return 0;
*data = per_cpu_ptr(tr->trace_buffer.data, cpu);
disabled = atomic_inc_return(&(*data)->disabled);
if (likely(disabled == 1))
return 1;
atomic_dec(&(*data)->disabled);
return 0;
}3.2、数据存入
它的trace会提供几部分信息：
- 1、irqoff的最大时长:latency；
- 2、在最大irqoff这期间所有的function trace信息；
- 3、最后的irqon的函数回调信息；
具体的存入方法参考“3.1、插桩”这一节的描述。
3.3、数据读出
从trace文件读出的irqoff tracer默认数据格式为：(显示最大latency以及过程中的详细函数调用)
# cat trace
# tracer: irqsoff
#
# irqsoff latency trace v1.1.5 on 4.4.21-g6678ed0-01979-g8d8eeb5-cIcd1f2d8-dirty
# --------------------------------------------------------------------
# latency: 1703 us, #184/184, CPU#3 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:8)
# -----------------
# | task: swapper/3-0 (uid:0 nice:0 policy:0 rt_prio:0)
# -----------------
# => started at: lpm_cpuidle_enter
# => ended at: cpuidle_enter_state
#
#
# _------=> CPU#
# / _-----=> irqs-off
# | / _----=> need-resched
# || / _---=> hardirq/softirq
# ||| / _--=> preempt-depth
# |||| / delay
# cmd pid ||||| time | caller
# \ / ||||| \ | /
<idle>-0 3dn.1 3us : psci_enter_sleep <-lpm_cpuidle_enter
<idle>-0 3dn.2 9us : update_debug_pc_event <-psci_enter_sleep
<idle>-0 3dn.2 11us : _raw_spin_lock <-update_debug_pc_event
<idle>-0 3dn.2 13us : preempt_count_add <-_raw_spin_lock
<idle>-0 3dn.3 17us : do_raw_spin_trylock <-_raw_spin_lock
<idle>-0 3dn.3 20us : _raw_spin_unlock <-update_debug_pc_event
<idle>-0 3dn.3 23us : do_raw_spin_unlock <-_raw_spin_unlock
<idle>-0 3dn.3 25us : preempt_count_sub <-_raw_spin_unlock
<idle>-0 3dn.2 28us : ktime_get <-lpm_cpuidle_enter
<idle>-0 3dn.2 33us : arch_counter_read <-ktime_get
<idle>-0 3dn.2 35us : lpm_stats_cpu_exit <-lpm_cpuidle_enter
<idle>-0 3dn.2 37us : update_level_stats.part.1 <-lpm_stats_cpu_exit
<idle>-0 3dn.2 41us : cluster_unprepare <-lpm_cpuidle_enter
<idle>-0 3dn.2 43us : _raw_spin_lock <-cluster_unprepare
<idle>-0 3dn.2 44us : preempt_count_add <-_raw_spin_lock
<idle>-0 3dn.3 46us : do_raw_spin_trylock <-_raw_spin_lock
<idle>-0 3dn.3 50us : lpm_stats_cluster_exit <-cluster_unprepare
<idle>-0 3dn.3 52us : update_level_stats.part.1 <-lpm_stats_cluster_exit
<idle>-0 3dn.3 57us : update_debug_pc_event <-cluster_unprepare
<idle>-0 3dn.3 59us : _raw_spin_lock <-update_debug_pc_event
<idle>-0 3dn.3 60us : preempt_count_add <-_raw_spin_lock
<idle>-0 3dn.4 62us : do_raw_spin_trylock <-_raw_spin_lock
<idle>-0 3dn.4 65us : _raw_spin_unlock <-update_debug_pc_event
<idle>-0 3dn.4 66us : do_raw_spin_unlock <-_raw_spin_unlock
<idle>-0 3dn.4 69us : preempt_count_sub <-_raw_spin_unlock
<idle>-0 3dn.3 71us : sched_set_cluster_dstate <-cluster_unprepare
<idle>-0 3dn.3 74us : cpu_cluster_pm_exit <-cluster_unprepare
<idle>-0 3dn.3 76us : _raw_read_lock <-cpu_cluster_pm_exit
<idle>-0 3dn.3 78us : preempt_count_add <-_raw_read_lock
<idle>-0 3dn.4 80us : do_raw_read_trylock <-_raw_read_lock
<idle>-0 3dn.4 82us : cpu_pm_notify <-cpu_cluster_pm_exit
<idle>-0 3dn.4 84us : __raw_notifier_call_chain <-cpu_pm_notify
<idle>-0 3dn.4 86us : notifier_call_chain <-__raw_notifier_call_chain
<idle>-0 3dn.4 88us : gic_cpu_pm_notifier <-notifier_call_chain
<idle>-0 3dn.4 90us : arch_timer_cpu_pm_notify <-notifier_call_chain
<idle>-0 3dn.4 92us : jtag_cpu_pm_callback <-notifier_call_chain
<idle>-0 3dn.4 95us : gladiator_erp_pm_callback <-notifier_call_chain
<idle>-0 3dn.4 97us : cpu_pm_pmu_notify <-notifier_call_chain
<idle>-0 3dn.4 99us : cpu_pm_pmu_common <-cpu_pm_pmu_notify
<idle>-0 3dn.4 102us : cti_cpu_pm_callback <-notifier_call_chain
<idle>-0 3dn.4 104us : coresight_cti_ctx_restore <-cti_cpu_pm_callback
<idle>-0 3dn.4 109us : _raw_spin_lock_irqsave <-coresight_cti_ctx_restore
<idle>-0 3dn.4 111us : preempt_count_add <-_raw_spin_lock_irqsave
<idle>-0 3dn.5 113us!: do_raw_spin_trylock <-_raw_spin_lock_irqsave
<idle>-0 3dn.5 222us : _raw_spin_unlock_irqrestore <-coresight_cti_ctx_restore
<idle>-0 3dn.5 224us : do_raw_spin_unlock <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.5 226us : preempt_count_sub <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.4 228us : _raw_spin_lock_irqsave <-coresight_cti_ctx_restore
<idle>-0 3dn.4 230us : preempt_count_add <-_raw_spin_lock_irqsave
<idle>-0 3dn.5 232us!: do_raw_spin_trylock <-_raw_spin_lock_irqsave
<idle>-0 3dn.5 337us : _raw_spin_unlock_irqrestore <-coresight_cti_ctx_restore
<idle>-0 3dn.5 339us : do_raw_spin_unlock <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.5 341us : preempt_count_sub <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.4 343us : _raw_spin_lock_irqsave <-coresight_cti_ctx_restore
<idle>-0 3dn.4 346us : preempt_count_add <-_raw_spin_lock_irqsave
<idle>-0 3dn.5 348us!: do_raw_spin_trylock <-_raw_spin_lock_irqsave
<idle>-0 3dn.5 492us : _raw_spin_unlock_irqrestore <-coresight_cti_ctx_restore
<idle>-0 3dn.5 494us : do_raw_spin_unlock <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.5 497us : preempt_count_sub <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.4 499us : _raw_spin_lock_irqsave <-coresight_cti_ctx_restore
<idle>-0 3dn.4 501us : preempt_count_add <-_raw_spin_lock_irqsave
<idle>-0 3dn.5 503us+: do_raw_spin_trylock <-_raw_spin_lock_irqsave
<idle>-0 3dn.5 603us : _raw_spin_unlock_irqrestore <-coresight_cti_ctx_restore
<idle>-0 3dn.5 605us : do_raw_spin_unlock <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.5 607us : preempt_count_sub <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.4 613us : fpsimd_cpu_pm_notifier <-notifier_call_chain
<idle>-0 3dn.4 615us : _raw_read_unlock <-cpu_cluster_pm_exit
<idle>-0 3dn.4 617us : do_raw_read_unlock <-_raw_read_unlock
<idle>-0 3dn.4 619us : preempt_count_sub <-_raw_read_unlock
<idle>-0 3dn.3 621us : update_cluster_history <-cluster_unprepare
<idle>-0 3dn.3 623us : ktime_get <-update_cluster_history
<idle>-0 3dn.3 626us : arch_counter_read <-ktime_get
<idle>-0 3dn.3 629us : cluster_unprepare <-cluster_unprepare
<idle>-0 3dn.3 631us : _raw_spin_lock <-cluster_unprepare
<idle>-0 3dn.3 633us : preempt_count_add <-_raw_spin_lock
<idle>-0 3dn.4 635us : do_raw_spin_trylock <-_raw_spin_lock
<idle>-0 3dn.4 638us : _raw_spin_unlock <-cluster_unprepare
<idle>-0 3dn.4 640us : do_raw_spin_unlock <-_raw_spin_unlock
<idle>-0 3dn.4 642us : preempt_count_sub <-_raw_spin_unlock
<idle>-0 3dn.3 644us : _raw_spin_unlock <-cluster_unprepare
<idle>-0 3dn.3 645us : do_raw_spin_unlock <-_raw_spin_unlock
<idle>-0 3dn.3 647us : preempt_count_sub <-_raw_spin_unlock
<idle>-0 3dn.2 649us : tick_broadcast_oneshot_control <-lpm_cpuidle_enter
<idle>-0 3dn.2 651us : __tick_broadcast_oneshot_control <-tick_broadcast_oneshot_control
<idle>-0 3dn.2 653us : _raw_spin_lock <-__tick_broadcast_oneshot_control
<idle>-0 3dn.2 654us : preempt_count_add <-_raw_spin_lock
<idle>-0 3dn.3 657us : do_raw_spin_trylock <-_raw_spin_lock
<idle>-0 3dn.3 660us : clockevents_switch_state <-__tick_broadcast_oneshot_control
<idle>-0 3dn.3 663us : ktime_get <-__tick_broadcast_oneshot_control
<idle>-0 3dn.3 667us : arch_counter_read <-ktime_get
<idle>-0 3dn.3 668us : tick_program_event <-__tick_broadcast_oneshot_control
<idle>-0 3dn.3 670us : clockevents_program_event <-tick_program_event
<idle>-0 3dn.3 672us : ktime_get <-clockevents_program_event
<idle>-0 3dn.3 676us : arch_counter_read <-ktime_get
<idle>-0 3dn.3 678us : arch_timer_set_next_event_virt <-clockevents_program_event
<idle>-0 3dn.3 679us : _raw_spin_unlock <-__tick_broadcast_oneshot_control
<idle>-0 3dn.3 681us : do_raw_spin_unlock <-_raw_spin_unlock
<idle>-0 3dn.3 683us : preempt_count_sub <-_raw_spin_unlock
<idle>-0 3dn.2 685us : cpu_pm_exit <-lpm_cpuidle_enter
<idle>-0 3dn.2 686us : _raw_read_lock <-cpu_pm_exit
<idle>-0 3dn.2 688us : preempt_count_add <-_raw_read_lock
<idle>-0 3dn.3 689us : do_raw_read_trylock <-_raw_read_lock
<idle>-0 3dn.3 691us : cpu_pm_notify <-cpu_pm_exit
<idle>-0 3dn.3 693us : __raw_notifier_call_chain <-cpu_pm_notify
<idle>-0 3dn.3 694us : notifier_call_chain <-__raw_notifier_call_chain
<idle>-0 3dn.3 696us : gic_cpu_pm_notifier <-notifier_call_chain
<idle>-0 3dn.3 698us : gic_cpu_sys_reg_init <-gic_cpu_pm_notifier
<idle>-0 3dn.3 700us : arch_timer_cpu_pm_notify <-notifier_call_chain
<idle>-0 3dn.3 702us : jtag_cpu_pm_callback <-notifier_call_chain
<idle>-0 3dn.3 704us : msm_jtag_restore_state <-jtag_cpu_pm_callback
<idle>-0 3dn.3 708us : msm_jtag_etm_restore_state <-msm_jtag_restore_state
<idle>-0 3dn.3 716us : raw_notifier_call_chain <-msm_jtag_etm_restore_state
<idle>-0 3dn.3 717us!: notifier_call_chain <-raw_notifier_call_chain
<idle>-0 3dn.3 1524us : gladiator_erp_pm_callback <-notifier_call_chain
<idle>-0 3dn.3 1526us : cpu_pm_pmu_notify <-notifier_call_chain
<idle>-0 3dn.3 1529us : armv8pmu_reset <-cpu_pm_pmu_notify
<idle>-0 3dn.3 1531us : cpu_pm_pmu_common <-cpu_pm_pmu_notify
<idle>-0 3dn.3 1533us : cpu_pm_pmu_setup <-cpu_pm_pmu_common
<idle>-0 3dn.3 1538us : rcu_irq_enter <-cpu_pm_pmu_setup
<idle>-0 3dn.3 1542us : rcu_eqs_exit_common.isra.48 <-rcu_irq_enter
<idle>-0 3dn.3 1545us : rcu_try_advance_all_cbs <-rcu_eqs_exit_common.isra.48
<idle>-0 3dn.3 1553us : armpmu_start <-cpu_pm_pmu_setup
<idle>-0 3dn.3 1558us : armpmu_event_set_period <-armpmu_start
<idle>-0 3dn.3 1562us : __rcu_read_lock <-perf_event_update_userpage
<idle>-0 3dn.3 1566us : __rcu_read_unlock <-perf_event_update_userpage
<idle>-0 3dn.3 1568us : armv8pmu_enable_event <-armpmu_start
<idle>-0 3dn.3 1570us : _raw_spin_lock_irqsave <-armv8pmu_enable_event
<idle>-0 3dn.3 1572us : preempt_count_add <-_raw_spin_lock_irqsave
<idle>-0 3dn.4 1574us : do_raw_spin_trylock <-_raw_spin_lock_irqsave
<idle>-0 3dn.4 1576us : _raw_spin_unlock_irqrestore <-armv8pmu_enable_event
<idle>-0 3dn.4 1578us : do_raw_spin_unlock <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.4 1581us : preempt_count_sub <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.3 1584us : rcu_irq_exit <-cpu_pm_pmu_setup
<idle>-0 3dn.3 1586us : rcu_eqs_enter_common.isra.46 <-rcu_irq_exit
<idle>-0 3dn.3 1591us : rcu_irq_enter <-cpu_pm_pmu_setup
<idle>-0 3dn.3 1593us : rcu_eqs_exit_common.isra.48 <-rcu_irq_enter
<idle>-0 3dn.3 1596us : rcu_try_advance_all_cbs <-rcu_eqs_exit_common.isra.48
<idle>-0 3dn.3 1598us : armpmu_start <-cpu_pm_pmu_setup
<idle>-0 3dn.3 1601us : armpmu_event_set_period <-armpmu_start
<idle>-0 3dn.3 1603us : __rcu_read_lock <-perf_event_update_userpage
<idle>-0 3dn.3 1605us : __rcu_read_unlock <-perf_event_update_userpage
<idle>-0 3dn.3 1606us : armv8pmu_enable_event <-armpmu_start
<idle>-0 3dn.3 1608us : _raw_spin_lock_irqsave <-armv8pmu_enable_event
<idle>-0 3dn.3 1611us : preempt_count_add <-_raw_spin_lock_irqsave
<idle>-0 3dn.4 1615us : do_raw_spin_trylock <-_raw_spin_lock_irqsave
<idle>-0 3dn.4 1617us : _raw_spin_unlock_irqrestore <-armv8pmu_enable_event
<idle>-0 3dn.4 1619us : do_raw_spin_unlock <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.4 1622us : preempt_count_sub <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.3 1623us : rcu_irq_exit <-cpu_pm_pmu_setup
<idle>-0 3dn.3 1627us : rcu_eqs_enter_common.isra.46 <-rcu_irq_exit
<idle>-0 3dn.3 1629us : rcu_irq_enter <-cpu_pm_pmu_setup
<idle>-0 3dn.3 1632us : rcu_eqs_exit_common.isra.48 <-rcu_irq_enter
<idle>-0 3dn.3 1634us : rcu_try_advance_all_cbs <-rcu_eqs_exit_common.isra.48
<idle>-0 3dn.3 1637us : armpmu_start <-cpu_pm_pmu_setup
<idle>-0 3dn.3 1639us : armpmu_event_set_period <-armpmu_start
<idle>-0 3dn.3 1642us : __rcu_read_lock <-perf_event_update_userpage
<idle>-0 3dn.3 1644us : __rcu_read_unlock <-perf_event_update_userpage
<idle>-0 3dn.3 1646us : armv8pmu_enable_event <-armpmu_start
<idle>-0 3dn.3 1647us : _raw_spin_lock_irqsave <-armv8pmu_enable_event
<idle>-0 3dn.3 1649us : preempt_count_add <-_raw_spin_lock_irqsave
<idle>-0 3dn.4 1651us : do_raw_spin_trylock <-_raw_spin_lock_irqsave
<idle>-0 3dn.4 1653us : _raw_spin_unlock_irqrestore <-armv8pmu_enable_event
<idle>-0 3dn.4 1655us : do_raw_spin_unlock <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.4 1657us : preempt_count_sub <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.3 1659us : rcu_irq_exit <-cpu_pm_pmu_setup
<idle>-0 3dn.3 1662us : rcu_eqs_enter_common.isra.46 <-rcu_irq_exit
<idle>-0 3dn.3 1665us : armv8pmu_start <-cpu_pm_pmu_common
<idle>-0 3dn.3 1667us : _raw_spin_lock_irqsave <-armv8pmu_start
<idle>-0 3dn.3 1670us : preempt_count_add <-_raw_spin_lock_irqsave
<idle>-0 3dn.4 1672us : do_raw_spin_trylock <-_raw_spin_lock_irqsave
<idle>-0 3dn.4 1674us : _raw_spin_unlock_irqrestore <-armv8pmu_start
<idle>-0 3dn.4 1676us : do_raw_spin_unlock <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.4 1679us : preempt_count_sub <-_raw_spin_unlock_irqrestore
<idle>-0 3dn.3 1680us : cti_cpu_pm_callback <-notifier_call_chain
<idle>-0 3dn.3 1683us : fpsimd_cpu_pm_notifier <-notifier_call_chain
<idle>-0 3dn.3 1684us : _raw_read_unlock <-cpu_pm_exit
<idle>-0 3dn.3 1686us : do_raw_read_unlock <-_raw_read_unlock
<idle>-0 3dn.3 1688us : preempt_count_sub <-_raw_read_unlock
<idle>-0 3dn.2 1691us : sched_set_cpu_cstate <-lpm_cpuidle_enter
<idle>-0 3dn.2 1693us : ktime_get <-lpm_cpuidle_enter
<idle>-0 3dn.2 1697us : arch_counter_read <-ktime_get
<idle>-0 3dn.1 1702us : lpm_cpuidle_enter <-cpuidle_enter_state
<idle>-0 3dn.1 1708us+: trace_hardirqs_on <-cpuidle_enter_state
<idle>-0 3dn.1 1720us : <stack trace>
=> trace_hardirqs_on
=> lpm_cpuidle_enter
=> cpuidle_enter_state
=> cpuidle_enter
=> cpu_startup_entry
=> secondary_start_kernel
=>
在通过trace文件读出数据时：
- 具体函数调用信息是使用trace_function()或者trace_graph_function()函数进行记录的，调用相应的方法解析即可；
- 最后的irqon的函数回调信息是使用__trace_stack()函数进行记录的，调用相应的方法解析即可；
- 最大latency信息的解析，使用tracer->print_header()；
在第一次读操作时，会打印header。seq_read() -> s_show() -> print_trace_line() -> tracer->print_header()：
static void irqsoff_print_header(struct seq_file *s)
{
trace_default_header(s);
}
扫一扫
840
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
