ESP32 触摸中断实现单机和长按的模拟

#define PRESSED 1  // 按下的标识
#define NOT_PRESSED 0 // 松开的标识
#define TOUCH_PIN 15 //监听的触摸引脚
const unsigned long SHORT_PRESS = 100; // 单机的时间间隔
const unsigned long LONG_PRESS = 3000; // 长按的时间间隔
/**
定义一个按钮的结构体
*/
typedef struct Buttons
{
    unsigned long counter = 0; // 计时器
    bool prevState = NOT_PRESSED; // 前一状态
    bool currentState; // 当前状态
} Button;
// 该函数判断GPIO按下的状态
int getState()
{
  // TOUCH_PIN 是某一个pin
  // 具体的触摸pin 可以去这里看https://github.com/espressif/arduino-esp32#esp32dev-board-pinmap
  if (touchRead(TOUCH_PIN) > 50)
  {
    return NOT_PRESSED;
  }
  else
  {
    return PRESSED;
  }
}
Button button;
// touch中断函数
void gotTouch()
{
    button.currentState = getState();
    if (button.currentState != button.prevState)
    {
        if (button.currentState == PRESSED)
        {
            button.counter = millis();
        }
        else
        {
            unsigned long diff = millis() - button.counter;
            if (diff >= SHORT_PRESS && diff < LONG_PRESS)
            {
                // 单机
                Serial.println("pressed");
            }
            else if (diff >= LONG_PRESS)
            {
                // 长按
                Serial.println("long pressed");
            }
        }
        button.prevState = button.currentState;
    }
}
void setup()
{
  Serial.begin(115200);
  // 初始化触摸中断
  touchAttachInterrupt(TOUCH_PIN, gotTouch, 80);
}
void loop()
{
}

以上为Arduino IDE环境下的代码示例