SpringCloud整合Seata1.4.2！

SpringCloud整合Seata1.4.2

一、Nacos中新建一个命名空间 我这里是seata

 

 二、修改Seata文件

registry.conf 

 二、Seata的一些配置 写在config.txt里面

注意 config.txt要与conf在同一目录下

这里我就简单挑一些简单的配置，配置详细内容可以自行查看

seata/config.txt at develop · seata/seata · GitHub

#1.我这里配置了我的db的连接信息
store.db.datasource=druid
store.db.dbType=mysql
store.db.driverClassName=com.mysql.jdbc.Driver
store.db.url=jdbc:mysql://192.168.207.17:3306/seata?useUnicode=true&rewriteBatchedStatements=true
store.db.user=root
store.db.password=root
#2.修改分布式事务的分组
service.vgroupMapping.my_test_tx_group=default
#自己添加一个分组
service.vgroupMapping.gulimall-seata-service-group=default 

三、在conf目录下 新建一个nacos-config.sh脚本文件

#!/bin/sh
# Copyright 1999-2019 Seata.io Group.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at、
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

while getopts ":h:p:g:t:u:w:" opt
do
  case $opt in
  h)
    host=$OPTARG
    ;;
  p)
    port=$OPTARG
    ;;
  g)
    group=$OPTARG
    ;;
  t)
    tenant=$OPTARG
    ;;
  u)
    username=$OPTARG
    ;;
  w)
    password=$OPTARG
    ;;
  ?)
    echo " USAGE OPTION: $0 [-h host] [-p port] [-g group] [-t tenant] [-u username] [-w password] "
    exit 1
    ;;
  esac
done

if [ -z ${host} ]; then
    host=localhost
fi
if [ -z ${port} ]; then
    port=8848
fi
if [ -z ${group} ]; then
    group="SEATA_GROUP"
fi
if [ -z ${tenant} ]; then
    tenant=""
fi
if [ -z ${username} ]; then
    username=""
fi
if [ -z ${password} ]; then
    password=""
fi

nacosAddr=$host:$port
contentType="content-type:application/json;charset=UTF-8"

echo "set nacosAddr=$nacosAddr"
echo "set group=$group"

urlencode() {
  length="${#1}"
  i=0
  while [ $length -gt $i ]; do
    char="${1:$i:1}"
    case $char in
    [a-zA-Z0-9.~_-]) printf $char ;;
    *) printf '%%%02X' "'$char" ;;
    esac
    i=`expr $i + 1`
  done
}

failCount=0
tempLog=$(mktemp -u)
function addConfig() {
  dataId=`urlencode $1`
  content=`urlencode $2`
  curl -X POST -H "${contentType}" "http://$nacosAddr/nacos/v1/cs/configs?dataId=$dataId&group=$group&content=$content&tenant=$tenant&username=$username&password=$password" >"${tempLog}" 2>/dev/null
  if [ -z $(cat "${tempLog}") ]; then
    echo " Please check the cluster status. "
    exit 1
  fi
  if [ "$(cat "${tempLog}")" == "true" ]; then
    echo "Set $1=$2 successfully "
  else
    echo "Set $1=$2 failure "
    failCount=`expr $failCount + 1`
  fi
}

count=0
COMMENT_START="#"
for line in $(cat $(dirname "$PWD")/config.txt | sed s/[[:space:]]//g); do
    if [[ "$line" =~ ^"${COMMENT_START}".*  ]]; then
      continue
    fi
    count=`expr $count + 1`
	  key=${line%%=*}
    value=${line#*=}
	  addConfig "${key}" "${value}"
done

echo "========================================================================="
echo " Complete initialization parameters,  total-count:$count ,  failure-count:$failCount "
echo "========================================================================="

if [ ${failCount} -eq 0 ]; then
	echo " Init nacos config finished, please start seata-server. "
else
	echo " init nacos config fail. "
fi

四、运行naocs-config.sh脚本文件

sh nacos-config.sh -h localhost -p 8848 -g SEATA_GROUP  -t cd8c38c5-92ef-49fd-ac8a-3241881665e2 -u nacos -w nacos

参数说明：

-h: host，默认值 localhost

-p: port，默认值 8848

-g: 配置分组，默认值为 'SEATA_GROUP'

-t: 租户信息，对应 Nacos 的命名空间ID字段, 默认值为空 ''

注意！路径中不能出现空格 我这里是错误的，因为配置了环境变量，所以不好修改，所以只能把seata文件复制到其他不带路径的文件下，执行脚本文件，执行完在复制回来。

D:\development utils\seata\seata-server-1.4.2\conf

执行完成后 来到Nacos的配置列表

 bin目录下 双击bat启动seata

 

五、引入相对应的依赖

对应版本

Spring Cloud Alibaba Version	Spring Cloud Version	Spring Boot Version	Seata Version
2021.0.1.0	2021.0.1	2.6.3	1.4.2
2.1.2.RELEASE	Greenwich	2.1.X.RELEASE	1.2.0

一、引入依赖以及版本控制

    <parent>
        <groupId>org.springframework.boot</groupId>
        <artifactId>spring-boot-starter-parent</artifactId>
        <version>2.6.3</version>
    </parent>

    <properties>
        <java.version>1.8</java.version>
        <spring.boot.version>2.6.8</spring.boot.version>
        <spring-cloud.version>2021.0.1</spring-cloud.version>
        <spring.cloud.alibaba.version>2021.0.1.0</spring.cloud.alibaba.version>
    </properties>


     <dependencies>
        <dependency>
            <groupId>org.springframework.cloud</groupId>
            <artifactId>spring-cloud-starter-bootstrap</artifactId>
        </dependency>

        <dependency>
            <groupId>org.springframework.cloud</groupId>
            <artifactId>spring-cloud-loadbalancer</artifactId>
        </dependency>

        <dependency>
            <groupId>com.alibaba.cloud</groupId>
            <artifactId>spring-cloud-starter-alibaba-seata</artifactId>
            <exclusions>
                <exclusion>
                    <groupId>io.seata</groupId>
                    <artifactId>seata-spring-boot-starter</artifactId>
                </exclusion>
            </exclusions>
        </dependency>

        <dependency>
            <groupId>io.seata</groupId>
            <artifactId>seata-spring-boot-starter</artifactId>
            <version>1.4.2</version>
        </dependency>

        <dependency>
            <groupId>com.alibaba.nacos</groupId>
            <artifactId>nacos-client</artifactId>
        </dependency>
    </dependencies>

     <dependencyManagement>
        <dependencies>
            <dependency>
                <groupId>org.springframework.cloud</groupId>
                <artifactId>spring-cloud-dependencies</artifactId>
                <version>${spring-cloud.version}</version>
                <type>pom</type>
                <scope>import</scope>
            </dependency>
            <dependency>
                <groupId>com.alibaba.cloud</groupId>
                <artifactId>spring-cloud-alibaba-dependencies</artifactId>
                <version>${spring.cloud.alibaba.version}</version>
                <type>pom</type>
                <scope>import</scope>
            </dependency>
            <dependency>
                <groupId>org.springframework.boot</groupId>
                <artifactId>spring-boot-dependencies</artifactId>
                <version>${spring.boot.version}</version>
                <type>pom</type>
                <scope>import</scope>
            </dependency>
        </dependencies>
    </dependencyManagement>

二、配置bootstrap.yml