51单片机lcd代码

#include "../delay/delay.h"
#include "lcd.h"

/*====================================================
                 判断写入命令/数据函数
=====================================================*/
void lcd_write(unsigned char byte, unsigned char flag)
{
    if(flag)
	{
	    RS = 1;        //选择数据寄存器
	}
	else
	{
	    RS = 0;        //选择指令寄存器
	}
	
	RW = 0;            //写
	E = 1;             //选中LCD
	LCDPORT = byte;
	delay_us(5);       //稳定
	E = 0;             //失能LCD
}

/*====================================================
                    LCD初始化函数
=====================================================*/
void lcd_init()
{
    delay_ms(15);
	lcd_write(0x38,LCD_WRITE_COM);    //显示8位数据接口，两行显示，5*7点阵字符
	delay_ms(5);
	lcd_write(0x38,LCD_WRITE_COM);
	delay_ms(5);
	lcd_write(0x38,LCD_WRITE_COM);
	delay_ms(5);
	lcd_write(0x38,LCD_WRITE_COM);
	delay_ms(5);
	lcd_write(0x08,LCD_WRITE_COM);    //关闭显示，关闭光标的闪烁
	delay_ms(5);
	lcd_write(0x01,LCD_WRITE_COM);    //清屏
	delay_ms(5);
	lcd_write(0x06,LCD_WRITE_COM);    //设置指针方式，画面不平移
	delay_ms(5);
	lcd_write(0x0c,LCD_WRITE_COM);    //打开显示
	delay_ms(5);
}

/*====================================================================================
                                 写入字符函数
函数原型：void lcd_dis_byte(unsigned char x, unsigned char y, unsigned char byte);
说明：x为行（1——2），y为列（1——8）。
=====================================================================================*/
void lcd_dis_byte(unsigned char x, unsigned char y, unsigned char byte)
{
    unsigned char add;
	
    if(((0 == x) || (x > 2)) || ((0 == y) || (y > 16)))
	{
	    return ;
	}
	
    add = 0x80 + (x - 1) * 0x40 + (y - 1);
	
	lcd_write(add,LCD_WRITE_COM);	     
	lcd_write(byte,LCD_WRITE_DATA);
}

/*====================================================================================
                                  写入字符串函数
函数原型：void lcd_dis_str(unsigned char x, unsigned char y, unsigned char *disdata);
说明：x为行（1——2），y为列（1——8）。
=====================================================================================*/
void lcd_dis_str(unsigned char x, unsigned char y, unsigned char *disdata)
{
    unsigned char add;
	
    if(((0 == x) || (x > 2)) || ((0 == y) || (y > 16)))
	{
	    return ;
	}
	
    add = 0x80 + (x - 1) * 0x40 + (y - 1);
	lcd_write(add,LCD_WRITE_COM);
	
    while(*disdata != '\0')
	{	    
	    lcd_write(*disdata,LCD_WRITE_DATA);
		disdata++;
	}
}

#if 0
/*===========================================================================
                                时间显示函数
============================================================================*/
void lcd_dis_time()
{
    lcd_write(0x80 + 4,LCD_WRITE_COM);
	lcd_write((hour / 10) + 0x30,LCD_WRITE_DATA);
	lcd_write((hour % 10) + 0x30,LCD_WRITE_DATA);
	lcd_write((min / 10) + 0x30,LCD_WRITE_DATA);
	lcd_write((min % 10) + 0x30,LCD_WRITE_DATA);
	lcd_write((sec / 10) + 0x30,LCD_WRITE_DATA);
	lcd_write((sec % 10) + 0x30,LCD_WRITE_DATA);
}
#endif