Perhaps the file system was created with the wrong erase size? jffs2_scan_eraseblock(): 编译报错

坑爹为什么别人编译启动，这么顺利，而我却各种报错！！

jffs2: Further such events for this erase block will not be printed
jffs2: Node at 0x001d8fac with length 0x000000ae would run over the end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d9000: 0x558b instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d9004: 0x14f2 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d9008: 0x8b8b instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d900c: 0x1553 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d9010: 0x6c14 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d9014: 0x0c0d instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d9018: 0x1474 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d901c: 0x2a53 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d9020: 0xf352 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d9024: 0x3a06 instead
jffs2: Further such events for this erase block will not be printed
jffs2: Node at 0x001d9fd8 with length 0x00000046 would run over the end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001da000: 0x2a49 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001da004: 0xc697 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001da008: 0x0002 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001da00c: 0x0002 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001da014: 0xa0c4 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001da018: 0xca61 instead

看着像是nand 分区的问题，好嘛有什么一顿百度操作，吐血了。

解决办法：

make menuconig  

配置如图：

重新编译打包，重新启动MINI2440 uboot 正常启动信息