移植 rootfs_qtopia_qt4-20100816 报错 nfs: server 10.10.10.1 not responding, still trying

最新推荐文章于 2024-09-11 15:16:48 发布

qq_34503002

最新推荐文章于 2024-09-11 15:16:48 发布

阅读量244

点赞数 5

分类专栏：虚拟机minn2440 文章标签： linux 网络运维

本文链接：https://blog.csdn.net/qq_34503002/article/details/138139776

版权

虚拟机minn2440 专栏收录该内容

27 篇文章 2 订阅

订阅专栏

文章描述了在Linux开发板上遇到的网络问题，包括DNS解析失败和NFS服务器响应不及时。通过调整启动参数，使用TCP协议和特定版本的NFS，解决了这些问题。

摘要由CSDN通过智能技术生成

NET: Registered protocol family 17
Registering the dns_resolver key type
s3c-rtc s3c2410-rtc: setting system clock to 2024-04-23 13:53:09 UTC (1713880389)
dm9000 dm9000: eth0: link up, 10Mbps, half-duplex, lpa 0x0400
IP-Config: Guessing netmask 255.0.0.0
IP-Config: Complete:
device=eth0, addr=10.10.10.10, mask=255.0.0.0, gw=255.255.255.255,
host=10.10.10.10, domain=, nis-domain=(none),
bootserver=10.10.10.1, rootserver=10.10.10.1, rootpath=
VFS: Mounted root (nfs filesystem) on device 0:15.
devtmpfs: mounted
Freeing init memory: 136K
usb 1-3: new full speed USB device number 2 using s3c2410-ohci
input: QEMU 0.10.50 QEMU USB Mouse as /devices/platform/s3c2410-ohci/usb1/1-3/1-3:1.0/input/input1
generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU 0.10.50 QEMU USB Mouse] on usb-s3c24xx-3/input0

nfs: server 10.10.10.1 not responding, still trying

怎么解决这个问题呢？

主机查看有对应的IP

linux@linux:~$ ifconfig 
eth0      Link encap:Ethernet  HWaddr 00:0c:29:67:62:7c  
          inet addr:192.168.1.8  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: 240e:330:2e70:e300:20c:29ff:fe67:627c/64 Scope:Global
          inet6 addr: fe80::20c:29ff:fe67:627c/64 Scope:Link
          inet6 addr: 240e:330:2e70:e300:b144:8ad9:26d:724d/64 Scope:Global
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3642 errors:0 dropped:0 overruns:0 frame:0
          TX packets:797 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:403023 (403.0 KB)  TX bytes:158001 (158.0 KB)
          Interrupt:19 Base address:0x2000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:338 errors:0 dropped:0 overruns:0 frame:0
          TX packets:338 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1 
          RX bytes:31795 (31.7 KB)  TX bytes:31795 (31.7 KB)

tap0      Link encap:Ethernet  HWaddr 7a:63:d3:15:e8:9e  
          inet addr:10.10.10.1  Bcast:10.255.255.255  Mask:255.0.0.0
          inet6 addr: fe80::7863:d3ff:fe15:e89e/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:52193 errors:0 dropped:0 overruns:0 frame:0
          TX packets:67702 errors:0 dropped:7 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:7710610 (7.7 MB)  TX bytes:73825532 (73.8 MB)

开发板ip 也是通的

linux@linux:~$ ping 10.10.10.10
PING 10.10.10.10 (10.10.10.10) 56(84) bytes of data.
64 bytes from 10.10.10.10: icmp_seq=1 ttl=64 time=0.339 ms
64 bytes from 10.10.10.10: icmp_seq=2 ttl=64 time=0.195 ms
64 bytes from 10.10.10.10: icmp_seq=3 ttl=64 time=0.175 ms



64 bytes from 10.10.10.10: icmp_seq=4 ttl=64 time=0.218 ms
64 bytes from 10.10.10.10: icmp_seq=5 ttl=64 time=0.190 ms
^C
--- 10.10.10.10 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4003ms
rtt min/avg/max/mdev = 0.175/0.223/0.339/0.060 ms

启动参数是这个：

set bootargs noinitrd root=/dev/nfs rw nfsroot=10.10.10.1:/rootfs_qtopia_qt4 ip=10.10.10.10:10.10.10.1 ::255.255.255.0 console=ttySAC0,115200 mini2440=1tb

解决办法：

办法一：

set bootargs noinitrd root=/dev/nfs rw nfsroot=10.10.10.1:/rootfs_qtopia_qt4,proto=tcp,nfsvers=3,nolock ip=10.10.10.10:10.10.10.1 ::255.255.255.0 console=ttySAC0,115200 mini2440=1tb