STM32之0.96寸4针OLED显示屏（IIC协议）驱动代码（程序稳定，清晰明了）

森旺电子

已于 2022-03-29 23:50:26 修改

阅读量8k

点赞数 5

文章标签： OLED I2C协议驱动代码显示控制微控制器

于 2022-03-18 00:02:46 首次发布

本文链接：https://blog.csdn.net/qq_35654286/article/details/123563686

版权

在这里插入图片描述
4针OLED IIC协议显示结果

温馨提示：本篇博客文章仅仅是OLED屏幕的驱动代码，其余代码（温度，湿度，甲烷）见主人主页其他文章

第一部分：IIC协议代码头文件

#ifndef __OLED_H
#define __OLED_H
#include "main.h"


#ifndef __OLED_H
#define __OLED_H
#include "main.h"


void OLED_init(void);
void OLED_full(void);
void OLED_clear(void);
void Picture_display(const unsigned char *ptr_pic);
void I2C_WriteByte	(uint8_t IIC_Byte);
void OLED_P6x8Str(uint8_t x,uint8_t y,int8_t ch[]);
void OLED_OneByte(uint8_t x,uint8_t y,uint8_t k);
void OLED_Chinese16x16Str(uint8_t x,uint8_t y,const uint8_t * ch);
void I2C_GPIO_Config(void);
void IIC_write(unsigned char date);


#endif

第二部分：IIC协议代码文件

void I2C_GPIO_Config(void)

{
    GPIO_InitTypeDef GPIO_InitStructure;
	__HAL_RCC_GPIOA_CLK_ENABLE();
    __HAL_RCC_GPIOB_CLK_ENABLE();
    GPIO_InitStructure.Pin = GPIO_PIN_7 ; 
    GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_OD; 
    GPIO_InitStructure.Pull = GPIO_PULLUP;
	GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_HIGH;
    HAL_GPIO_Init(GPIOA, &GPIO_InitStructure);//SCL引脚初始化
	HAL_GPIO_WritePin(GPIOA,GPIO_PIN_7 ,GPIO_PIN_SET);
	
	
	GPIO_InitStructure.Pin = GPIO_PIN_0 ;
	 HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);//SDA引脚初始化
	HAL_GPIO_WritePin(GPIOB,GPIO_PIN_0 ,GPIO_PIN_SET);
}



const unsigned char  OLED_init_cmd[25]=
{
  /*0xae,0X00,0X10,0x40,0X81,0XCF,0xff,0xa1,0xa4,
  0xA6,0xc8,0xa8,0x3F,0xd5,0x80,0xd3,0x00,0XDA,0X12,
  0x8d,0x14,0xdb,0x40,0X20,0X02,0xd9,0xf1,0xAF*/
       0xAE,//关闭显示
       0xD5,//设置时钟分频因子,震荡频率
       0x80,  //[3:0],分频因子;[7:4],震荡频率

       0xA8,//设置驱动路数
       0X3F,//默认0X3F(1/64)
       0xD3,//设置显示偏移
       0X00,//默认为0
       0x40,//设置显示开始行 [5:0],行数.                              
       0x8D,//电荷泵设置
       0x14,//bit2，开启/关闭
       0x20,//设置内存地址模式
       0x02,//[1:0],00，列地址模式;01，行地址模式;10,页地址模式;默认10;
       0xA1,//段重定义设置,bit0:0,0->0;1,0->127;
       0xC8,//设置COM扫描方向;bit3:0,普通模式;1,重定义模式 COM[N-1]->COM0;N:驱动路数
       0xDA,//设置COM硬件引脚配置
       0x12,//[5:4]配置            
       0x81,//对比度设置
       0xEF,//1~255;默认0X7F (亮度设置,越大越亮)
       0xD9,//设置预充电周期
       0xf1,//[3:0],PHASE 1;[7:4],PHASE 2;
       0xDB,//设置VCOMH 电压倍率
       0x30,//[6:4] 000,0.65*vcc;001,0.77*vcc;011,0.83*vcc;
       0xA4,//全局显示开启;bit0:1,开启;0,关闭;(白屏/黑屏)
       0xA6,//设置显示方式;bit0:1,反相显示;0,正常显示        
       0xAF,//开启显示     
};
/*********************************
功能：微秒级延时函数
*********************************/
void delay_us(unsigned int _us_time)
{       
  unsigned char x=0;
  for(;_us_time>0;_us_time--)
  {
    x++;x++;x++;x++;x++;x++;x++;x++;x++;x++;x++;x++;
	  x++;x++;x++;x++;x++;x++;x++;x++;x++;x++;x++;x++;
	  x++;x++;x++;x++;x++;x++;x++;x++;x++;x++;x++;x++;
  }
}
/*********************************
功能：毫秒级延时函数
*********************************/
void delay_ms(unsigned int _ms_time)
{
	unsigned int i,j;
	for(i=0;i<_ms_time;i++)
	{
		for(j=0;j<900;j++)
		{;}
	}
}
/*************************************************************************
功能：启动I2C总线，即发送I2C起始条件。SCL为高电平期间,SDA出现下降沿
**************************************************************************/
void IIC_start()
{
	IIC_SDA_1;
	delay_us(1);
	IIC_SCK_1;
	delay_us(1);				   //所有操作结束释放SCL	
	IIC_SDA_0;
	delay_us(3);
	IIC_SCK_0;
	
    IIC_write(0x78);
        
}


/*************************************************************************
功能：结束I2C总线，即发送I2C结束条件。SCL为高电平期间,SDA出现上升沿
**************************************************************************/
void IIC_stop()
{
	IIC_SDA_0;
	delay_us(1);
	IIC_SCK_1;
	delay_us(3);
	IIC_SDA_1;
	
}

/*****************************************
字节数据发送函数
函数原型：void IIC_write(unsigned char date);
功能：将数据date发送出去，可以是地址，也可以是数据
******************************************/
void IIC_write(unsigned char date)
{
	unsigned char i, temp;
	temp = date;		
	for(i=0; i<8; i++)//传送数据长度为8位
	{	IIC_SCK_0;
		
        if ((temp&0x80)==0)//判断发送位
            IIC_SDA_0;
        else IIC_SDA_1;
		temp = temp << 1;
		delay_us(1);			  
		IIC_SCK_1;
		delay_us(1);
		
	}
	IIC_SCK_0;
	delay_us(1);
	IIC_SDA_1;
	delay_us(1);
	IIC_SCK_1;
	delay_us(1);
	IIC_SCK_0;
	delay_us(1);
	

}




void OLED_send_cmd(unsigned char o_command)
{

	IIC_start();
	IIC_write(0x00); 
	IIC_write(o_command);
	IIC_stop();

}

void OLED_send_data(unsigned char o_data)
{ 
	IIC_start();
	IIC_write(0x40);
	IIC_write(o_data);
	IIC_stop();
}
void Column_set(unsigned char column)
{
	OLED_send_cmd(0x10|(column>>4));    //设置列地址高位
	OLED_send_cmd(0x00|(column&0x0f));   //设置列地址低位  
	 
}
void Page_set(unsigned char page)
{
	OLED_send_cmd(0xb0+page);
}

void OLED_clear(void)
{
	unsigned char page,column;
	for(page=0;page<8;page++)             //page loop
	  { 
		  Page_set(page);
		  Column_set(0);	  
		  for(column=0;column<128;column++)	//column loop
			{
			  OLED_send_data(0x00);
			}
	  }
}


void OLED_full(void)
{
	unsigned char page,column;
	for(page=0;page<8;page++)             //page loop
	  { 
		Page_set(page);
		Column_set(0);	  
	for(column=0;column<128;column++)	//column loop
		  {
			OLED_send_data(0xff);
		  }
	  }
}





void Picture_display(const unsigned char *ptr_pic)
{
	unsigned char page,column;
	for(page=0;page<(64/8);page++)        //page loop
	  { 
	Page_set(page);
	Column_set(0);	  
	for(column=0;column<128;column++)	//column loop
		  {
			OLED_send_data(*ptr_pic++);
		  }
	  }
}



void Picture_ReverseDisplay(const unsigned char *ptr_pic)
{
    unsigned char page,column,data;
    for(page=0;page<(64/8);page++)        //page loop
      { 
		  Page_set(page);
		  Column_set(0);	  
		  for(column=0;column<128;column++)	//column loop
          {
            data=*ptr_pic++;
            data=~data;
            OLED_send_data(data);
          }
      }
  }

  
  
  
void OLED_Set_Pos(uint8_t x, uint8_t y) 
{ 
	OLED_send_cmd(0xb0+y);
	OLED_send_cmd(((x&0xf0)>>4)|0x10);
	OLED_send_cmd((x&0x0f)|0x01);
}   
void OLED_Chinese16x16Str(uint8_t x,uint8_t y,const uint8_t * ch)
{
		uint8_t i;
		uint8_t	j,k =0;
		j = x<<4;		//列 0~7		该字符占2*8bits
		k = y<<1;	//行 0~4	该字符占2*8bits
		OLED_Set_Pos(j,k);
		for(i=0;i<16;i++)
		OLED_send_data(*(ch+i));
		OLED_Set_Pos(j,k+1);	
		for(i=16;i<32;i++)
		OLED_send_data(*(ch+i));	
}

void OLED_OneByte(uint8_t x,uint8_t y,uint8_t k)
{
	uint8_t c=0,i=0,z =0;
	z = x*6;	//获取起始位置
		c =k-32;
	if(z>126){z=0;y++;}
		OLED_Set_Pos(z,y); //设置地址
		/*一个ascii显示需要6个8bit数据*/
		for(i=0;i<6;i++)
		OLED_send_data(F6x8[c][i]);
}

 
void OLED_P6x8Str(uint8_t x,uint8_t y,int8_t ch[])
{
	uint8_t c=0,i=0,j=0,z =0;
	z = x*6;	//
	while (ch[j]!='\0')
	{
		c =ch[j]-32;
		if(z>126){z=0;y++;}
		OLED_Set_Pos(z,y);
		for(i=0;i<6;i++)
		OLED_send_data(F6x8[c][i]);
		z+=6;
		j++;
	}
}

void OLED_init(void)
{
	unsigned char i;
	for(i=0;i<25;i++)
	{
		OLED_send_cmd(OLED_init_cmd[i]);
	}
	OLED_clear();	
	OLED_Chinese16x16Str(2,1,Chinese_KE_F16X16);
	OLED_Chinese16x16Str(3,1,Chinese_JI_F16X16);	
	OLED_Chinese16x16Str(4,1,Chinese_XUE_F16X16);	
	OLED_Chinese16x16Str(5,1,Chinese_YUAN_F16X16);	
	OLED_Chinese16x16Str(2,2,Chinese_BI_F16X16);		
	OLED_Chinese16x16Str(3,2,Chinese_YE_F16X16);		
	OLED_Chinese16x16Str(4,2,Chinese_SHE_F16X16);			
	OLED_Chinese16x16Str(5,2,Chinese_JII_F16X16);	

	OLED_Chinese16x16Str(1,0,Chinese_Liu_F16X16);	
	OLED_Chinese16x16Str(2,0,Chinese_Tang_F16X16);		
	OLED_Chinese16x16Str(3,0,Chinese_CHONG_F16X16);
	OLED_Chinese16x16Str(4,0,Chinese_WU_F16X16);	
	OLED_Chinese16x16Str(5,0,Chinese_WEI_F16X16);	
	OLED_Chinese16x16Str(6,0,Chinese_SHI_F16X16);	
	OLED_Chinese16x16Str(7,0,Chinese_QI_F16X16);

}

第三部分：字库代码文件

typedef unsigned          char uint8_t;
typedef unsigned short     int uint16_t;
typedef unsigned           int uint32_t;


//ASCII编码8*16英文字符
const unsigned char F6x8[][6] =
{
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
	0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
	0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
	0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
	0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
	0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
	0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
	0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
	0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
	0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
	0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
	0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
	0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
	0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
	0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
	0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
	0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
	0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
	0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
	0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
	0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
	0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
	0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
	0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
	0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
	0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
	0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
	0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
	0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
	0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
	0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
	0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
	0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
	0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
	0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
	0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
	0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
	0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
	0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
	0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
	0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
	0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
	0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
	0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
	0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
	0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
	0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
	0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
	0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
	0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
	0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
	0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
	0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
	0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
	0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
	0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
	0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
	0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
	0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
	0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
	0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
	0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
	0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
	0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
	0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
	0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
	0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
	0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
	0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
	0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
	0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
	0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
	0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
	0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
	0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
	0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
	0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
	0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
	0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
	0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
	0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
	0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
	0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
	0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
	0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
	0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
	0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
	0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
	0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
	0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
	0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
	0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};
/****************************************8*16的点阵************************************/
const unsigned char F8X16[]=	  
{
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
  0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
  0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
  0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
  0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
  0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
  0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
  0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
  0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
  0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
  0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
  0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
  0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
  0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
  0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
  0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
  0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
  0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
  0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
  0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
  0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
  0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
  0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
  0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
  0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
  0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
  0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
  0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
  0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
  0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
  0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
  0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
  0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
  0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
  0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
  0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
  0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
  0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
  0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
  0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
  0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
  0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
  0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
  0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
  0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
  0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
  0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
  0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
  0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
  0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
  0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
  0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
  0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
  0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
  0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
  0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
  0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
  0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
  0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
  0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
  0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
  0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
  0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
  0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
  0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
  0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
  0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
  0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
  0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
  0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
  0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
  0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
  0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
  0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
  0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};
const unsigned char Chinese_KE_F16X16[]=
{0x24,0x24,0xA4,0xFE,0xA3,0x22,0x00,0x22,0xCC,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x08,0x06,0x01,0xFF,0x00,0x01,0x04,0x04,0x04,0x04,0x04,0xFF,0x02,0x02,0x02,0x00};/*"科",2*/
/* (16 X 16 , 宋体 )*/
const unsigned char Chinese_JI_F16X16[]=
{0x10,0x10,0x10,0xFF,0x10,0x90,0x08,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x08,0x00,0x04,0x44,0x82,0x7F,0x01,0x80,0x80,0x40,0x43,0x2C,0x10,0x28,0x46,0x81,0x80,0x00};/*"技",3*/
/* (16 X 16 , 宋体 )*/
const unsigned char Chinese_XUE_F16X16[]=
{0x40,0x30,0x11,0x96,0x90,0x90,0x91,0x96,0x90,0x90,0x98,0x14,0x13,0x50,0x30,0x00,0x04,0x04,0x04,0x04,0x04,0x44,0x84,0x7E,0x06,0x05,0x04,0x04,0x04,0x04,0x04,0x00};/*"学",4*/
/* (16 X 16 , 宋体 )*/
const unsigned char Chinese_YUAN_F16X16[]=
{0x00,0xFE,0x22,0x5A,0x86,0x10,0x0C,0x24,0x24,0x25,0x26,0x24,0x24,0x14,0x0C,0x00,0x00,0xFF,0x04,0x08,0x07,0x80,0x41,0x31,0x0F,0x01,0x01,0x3F,0x41,0x41,0x71,0x00};/*"院",5*/
/* (16 X 16 , 宋体 )*/
const unsigned char Chinese_BI_F16X16[]=
{0x00,0x00,0xFF,0x88,0x88,0x48,0x48,0x00,0x7F,0x88,0x84,0x84,0x82,0xE0,0x00,0x00,0x04,0x04,0x05,0x04,0x04,0x04,0x04,0xFF,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00};/*"毕",6*/
/* (16 X 16 , 宋体 )*/
const unsigned char Chinese_YE_F16X16[]=
{0x00,0x10,0x60,0x80,0x00,0xFF,0x00,0x00,0x00,0xFF,0x00,0x00,0xC0,0x30,0x00,0x00,0x40,0x40,0x40,0x43,0x40,0x7F,0x40,0x40,0x40,0x7F,0x42,0x41,0x40,0x40,0x40,0x00};/*"业",7*/
/* (16 X 16 , 宋体 )*/
const unsigned char Chinese_SHE_F16X16[]=
{0x40,0x40,0x42,0xCC,0x00,0x40,0xA0,0x9E,0x82,0x82,0x82,0x9E,0xA0,0x20,0x20,0x00,0x00,0x00,0x00,0x3F,0x90,0x88,0x40,0x43,0x2C,0x10,0x28,0x46,0x41,0x80,0x80,0x00};/*"设",8*/
/* (16 X 16 , 宋体 )*/
const unsigned char Chinese_JII_F16X16[]=
{0x40,0x40,0x42,0xCC,0x00,0x40,0x40,0x40,0x40,0xFF,0x40,0x40,0x40,0x40,0x40,0x00,0x00,0x00,0x00,0x7F,0x20,0x10,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00};/*"计",9*/
/* (16 X 16 , 宋体 )*/
	
	
	
	
	
const unsigned char Chinese_Liu_F16X16[]=	
{0x10,0x94,0x53,0x32,0x1E,0x32,0x52,0x10,0x00,0x7E,0x42,0x42,0x42,0x7E,0x00,0x00,
0x00,0x00,0x00,0xFF,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0xFF,0x00,0x00,0x00,0x00};/*"智",0*/

	
const unsigned char Chinese_Tang_F16X16[]=	
{0x08,0xCC,0x4A,0x49,0x48,0x4A,0xCC,0x18,0x00,0x7F,0x88,0x88,0x84,0x82,0xE0,0x00,
0x00,0xFF,0x12,0x12,0x52,0x92,0x7F,0x00,0x00,0x7E,0x88,0x88,0x84,0x82,0xE0,0x00};/*"能",1*/
const unsigned char Chinese_CHONG_F16X16[]=
{0x90,0x8C,0x84,0x84,0x84,0xF4,0x85,0x86,0x84,0x84,0x94,0xE4,0x84,0x94,0x8C,0x00,0x80,0x40,0x20,0x18,0x06,0x81,0x80,0x40,0x7F,0x90,0x88,0x84,0x82,0x80,0xF0,0x00};/*"宠",2*/
/* (16 X 16 , 宋体 )*/
const unsigned char Chinese_WU_F16X16[]=
{0x40,0x3C,0x10,0xFF,0x10,0x10,0x20,0x10,0x8F,0x78,0x08,0xF8,0x08,0xF8,0x00,0x00,0x02,0x06,0x02,0xFF,0x01,0x01,0x04,0x42,0x21,0x18,0x46,0x81,0x40,0x3F,0x00,0x00};/*"物",3*/
/* (16 X 16 , 宋体 )*/
const unsigned char Chinese_WEI_F16X16[]=
{0x00,0xFC,0x04,0x04,0xFC,0x00,0xFE,0x92,0x92,0xFE,0x92,0x92,0xFE,0x00,0x00,0x00,0x00,0x0F,0x04,0x04,0x0F,0x02,0xFE,0x42,0x22,0x0E,0x12,0x22,0x52,0x8A,0x82,0x00};/*"喂",4*/
/* (16 X 16 , 宋体 )*/
const unsigned char Chinese_SHI_F16X16[]=
{0x20,0x20,0x10,0xF0,0xA8,0xA4,0xAA,0xB1,0xA2,0xA4,0xA8,0xF0,0x10,0x20,0x20,0x00,0x00,0x00,0x00,0xFF,0x82,0x42,0x22,0x0A,0x0A,0x12,0x12,0x2B,0x44,0x80,0x00,0x00};/*"食",5*/
/* (16 X 16 , 宋体 )*/
const unsigned char Chinese_QI_F16X16[]=
{0x80,0x80,0x9E,0x92,0x92,0x92,0x9E,0xE0,0x80,0x9E,0xB2,0xD2,0x92,0x9E,0x80,0x00,0x08,0x08,0xF4,0x94,0x92,0x92,0xF1,0x00,0x01,0xF2,0x92,0x94,0x94,0xF8,0x08,0x00};/*"器",6*/
/* (16 X 16 , 宋体 )*/

第四部分：主函数

int main(void)
{   
  HAL_Init();
  SystemClock_Config();/* 配置系统时钟为72 MHz */
  Key_GPIO_Config();
  OLED_init();
  while (1)
  {
  }
}

森旺电子

关注

5
点赞
踩
78

收藏

觉得还不错? 一键收藏
打赏
0
评论
复制链接

分享到 QQ

分享到新浪微博

扫一扫