camera开发笔记

1.其中人像的那个，先看一下log，是不是人像标定参数有异常，引起的拍照卡住

如果有这个log，就让测试用新版本验证好了
04-13 16:54:56.635 12660 12811 E walog/depth/NDCamera: Less calib data size(412).
04-13 16:54:56.635 12660 12811 E walog/depth/DEPIMPL2: set calib data failed!

问题机器还要重新进行双摄标定
2.查看帧率方法
camx/src/swl/camxsensornode.cpp
camxresult sensornode::notfyCSLmessage()
04-22 07:20:19.440 805 1080 V CamX : [ VERB][SENSOR ] camxsensornode.cpp:1683 NotifyCSLMessage() requestID: 2090, sofTimestamp: 10697771151425, exposure start time: 10697751140890
04-22 07:20:19.474 805 1080 V CamX : [ VERB][SENSOR ] camxsensornode.cpp:1683 NotifyCSLMessage() requestID: 2091, sofTimestamp: 10697804482102, exposure start time: 10697784471567
出帧时间戳和曝光时间戳
3.input 指令
发送文本内容：
adb shell input text 123456
模拟按下HOME
adb shell input keyevent KEYCODE_HOME
点击屏幕上坐标为(500,500)位置
adb shell input tap 500 500
从右向左滑动屏幕
adb shell input swipe 500 500 501 501 2000
4.dump raw图adb shell setprop persist.vendor.camera.autoImageDump true //设置完成后，所有使能node 的输出端口都可以被dump
adb shell setprop persist.vendor.camera.dumpInputatOutput true //设置完成后，当dump输出端口时，输入端口也被dump
adb shell setprop persist.vendor.camera.dynamicImageDumpTrigger 1
adb shell setprop persist.vendor.camera.autoImageDumpMask 0x1 //该指令是只打开IFE的输出
adb shell setprop persist.vendor.camera.autoImageDumpIFEInstanceMask 0x7 // AllInstances

adb shell setprop persist.vendor.camera.autoImageDumpIFEoutputPortMask 0xFB8 //AllRawOutput

adb shell setprop persist.vendor.camera.autoImageDumpMask 0x1 //该指令是只打开IFE的输出
adb shell setprop persist.vendor.camera.autoImageDumpIFEoutputPortMask 0xFB8 //AllRawOutput

adb shell setprop persist.vendor.camera.reprocessDump TRUE //只dump拍照那一帧
5.查看raw图
做这个工具的起因是高通的Chromatix没有Mac和Linux版本，看个RAW图还得开虚拟机，很不方便。

git地址：
2022.7.4
1、win+up(全屏)