Docker elasticSearch集群搭建小结

参考博客：https://blog.csdn.net/belonghuang157405/article/details/83301937

由于之前的两篇博客已经简述过docker elasticSearch及elasticHead 的搭建,所以这里只是简单记录一下集群的搭建过程。

elasticSearch的集群搭建本来就相对简单，所以，docker化的ES集群搭建也不是很负责，总起来的话，只有以下两点：

1.创建所需要的文件

1.1 创建数据文件挂载目录

[root@localhost soft]# pwd
/home/soft
[root@localhost soft]# mkdir -p ES/config
[root@localhost soft]# cd  ES 
[root@localhost ES]# mkdir data1
[root@localhost ES]# mkdir data2
[root@localhost ES]# mkdir data3

如果你服务器端口没有开放，需要如下命令将端口放开

[root@localhost ES]# firewall-cmd --add-port=9300/tcp
success
[root@localhost ES]# firewall-cmd --add-port=9301/tcp
success
[root@localhost ES]# firewall-cmd --add-port=9302/tcp
success

1.2创建节点的配置文件

[root@localhost ES]# cd ES/config/
使用vim命令分别创建如下文件：es1.yml,es2.yml,es3.yml

es1.yml

cluster.name: elasticsearch-cluster
node.name: es-node1
network.bind_host: 0.0.0.0
network.publish_host: 192.168.9.219
http.port: 9200
transport.tcp.port: 9300
http.cors.enabled: true
http.cors.allow-origin: "*"
node.master: true 
node.data: true  
discovery.zen.ping.unicast.hosts: ["192.168.9.219:9300","192.168.9.219:9301","192.168.9.219:9302"]
discovery.zen.minimum_master_nodes: 2

es2.yml

cluster.name: elasticsearch-cluster
node.name: es-node2
network.bind_host: 0.0.0.0
network.publish_host: 192.168.9.219
http.port: 9201
transport.tcp.port: 9301
http.cors.enabled: true
http.cors.allow-origin: "*"
node.master: true 
node.data: true  
discovery.zen.ping.unicast.hosts: ["192.168.9.219:9300","192.168.9.219:9301","192.168.9.219:9302"]
discovery.zen.minimum_master_nodes: 2

es3.yml

cluster.name: elasticsearch-cluster
node.name: es-node3
network.bind_host: 0.0.0.0
network.publish_host: 192.168.9.219
http.port: 9202
transport.tcp.port: 9302
http.cors.enabled: true
http.cors.allow-origin: "*"
node.master: true 
node.data: true  
discovery.zen.ping.unicast.hosts: ["192.168.9.219:9300","192.168.9.219:9301","192.168.9.219:9302"]
discovery.zen.minimum_master_nodes: 2

注：本机虚拟机ip：192.168.9.219 读者请自行更改

2、启动容器

 docker run -e ES_JAVA_OPTS="-Xms256m -Xmx256m" -d -p 9200:9200 -p 9300:9300 -v /home/soft/ES/config/es1.yml:/usr/share/elasticsearch/config/elasticsearch.yml -v /home/soft/ES/data1:/usr/share/elasticsearch/data --name ES01 elasticsearch:5.6.8
 
 docker run -e ES_JAVA_OPTS="-Xms256m -Xmx256m" -d -p 9201:9201 -p 9301:9301 -v /home/soft/ES/config/es2.yml:/usr/share/elasticsearch/config/elasticsearch.yml -v /home/soft/ES/data2:/usr/share/elasticsearch/data --name ES02 elasticsearch:5.6.8

 docker run -e ES_JAVA_OPTS="-Xms256m -Xmx256m" -d -p 9202:9202 -p 9302:9302 -v /home/soft/ES/config/es3.yml:/usr/share/elasticsearch/config/elasticsearch.yml -v /home/soft/ES/data3:/usr/share/elasticsearch/data --name ES03 elasticsearch:5.6.8

注：设置-e ES_JAVA_OPTS="-Xms256m -Xmx256m" 是因为/etc/elasticsearch/jvm.options 默认jvm最大最小内存是2G，读者启动容器后 可用docker stats命令查看

为了防止如下错误：

bootstrap checks failed max virtual memory areas vm.max_map_count [65530] likely too low, increase to at least [262144]

执行如下命令：

sysctl -w vm.max_map_count=262144

或者

在centos窗口中，修改配置sysctl.conf

vim /etc/sysctl.conf

加入如下内容：

vm.max_map_count=262144 

启用配置：

sysctl -p

四、验证是否搭建成功

1.在浏览器地址栏访问http://192.168.9.219:9200/_cat/nodes?pretty 查看节点状态

注：节点名称带表示为主节点*