stm32 通过串口进行信息交流 并控制led亮灭

h  关闭黄色

l  关闭蓝色

g 关闭绿色

a 打开全部


int main(void)
{
  /* USER CODE BEGIN 1 */

  /* USER CODE END 1 */

  /* MCU Configuration----------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_USART1_UART_Init();
  /* USER CODE BEGIN 2 */

  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while (1)  //ËÀÑ­»·  ²é¿´Ö´ÐÐЧ¹û
  {

  /* USER CODE END WHILE */

  /* USER CODE BEGIN 3 */
		uint8_t ch[10]="";
		
		HAL_UART_Receive(&huart1, ch, 10, 200);
		if(ch[0] == 'l')
		{
			HAL_GPIO_WritePin(GPIOB, GPIO_PIN_1, GPIO_PIN_SET);
			HAL_UART_Transmit(&huart1, "   blue off   ", 10, 200);
			HAL_Delay(500);
		}
		else if(ch[0]=='g')
		{
			HAL_GPIO_WritePin(GPIOB, GPIO_PIN_0, GPIO_PIN_SET);
			HAL_UART_Transmit(&huart1, "   grean off   ", 10, 200);
			HAL_Delay(500);
		}
		else if(ch[0]=='h')
		{
			HAL_GPIO_WritePin(GPIOB, GPIO_PIN_2, GPIO_PIN_SET);
			HAL_UART_Transmit(&huart1, "   yellow off   ", 10, 200);
			HAL_Delay(500);
		}
		else if(ch[0]=='a')
		{
			HAL_GPIO_WritePin(GPIOB, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2, GPIO_PIN_RESET);
			HAL_UART_Transmit(&huart1, "   all led on  ", 10, 200);
			HAL_Delay(500);
		}
  }
  /* USER CODE END 3 */

}

简单开关控制

#include "main.h"
#include "stm32f0xx_hal.h"

/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Private variables ---------------------------------------------------------*/
UART_HandleTypeDef huart1;

/* USER CODE BEGIN PV */
/* Private variables ---------------------------------------------------------*/

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_USART1_UART_Init(void);

/* USER CODE BEGIN PFP */
/* Private function prototypes -----------------------------------------------*/

/* USER CODE END PFP */

/* USER CODE BEGIN 0 */

/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  *
  * @retval None
  */
int main(void)
{
  /* USER CODE BEGIN 1 */

  /* USER CODE END 1 */

  /* MCU Configuration----------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_USART1_UART_Init();
  /* USER CODE BEGIN 2 */

  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while (1)
  {

  /* USER CODE END WHILE */

  /* USER CODE BEGIN 3 */
		
		uint8_t data = 0;
		HAL_UART_Receive(&huart1, &data, 1, 0);
		
		if(data == 'l')
		{
			HAL_GPIO_WritePin(GPIOB, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2, GPIO_PIN_RESET);
			HAL_UART_Transmit(&huart1, &data, 1, 0);
		}
		else if(data == 'h')
		{
			HAL_GPIO_WritePin(GPIOB, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2, GPIO_PIN_SET);
			HAL_UART_Transmit(&huart1, &data, 1, 0);
		}			
		
  }
  /* USER CODE END 3 */

}


已标记关键词 清除标记
相关推荐
©️2020 CSDN 皮肤主题: 游动-白 设计师:白松林 返回首页
实付 9.90元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、C币套餐、付费专栏及课程。

余额充值