009-Ensp-实验-配置单臂路由

实验要求

        1. 使用单臂路由策略使PC1和PC2之间互联。

实验结构

实验步骤

1. 配置 AR2 创建VLAN 配置IP

<Huawei>system-view 

[Huawei]vlan batch 10 20

[Huawei]interface g0/0/0.10
[Huawei-GigabitEthernet0/0/0.10]dot1q termination vid 10	
[Huawei-GigabitEthernet0/0/0.10]arp broadcast enable 
[Huawei-GigabitEthernet0/0/0.10]ip address 1.1.1.254 255.255.255.0
[Huawei-GigabitEthernet0/0/0.10]q


[Huawei]interface g0/0/0.20
[Huawei-GigabitEthernet0/0/0.20]dot1q termination vid 20	
[Huawei-GigabitEthernet0/0/0.20]arp broadcast enable 
[Huawei-GigabitEthernet0/0/0.20]ip address 2.2.2.254 255.255.255.0
[Huawei-GigabitEthernet0/0/0.20]q

2. LSW 创建VLAN

<Huawei>system-view 

[Huawei]vlan batch 10 20

[Huawei]interface  g0/0/2
[Huawei-GigabitEthernet0/0/2]port link-type access
[Huawei-GigabitEthernet0/0/2]port default vlan 10
[Huawei-GigabitEthernet0/0/2]q


[Huawei]interface g0/0/3
[Huawei-GigabitEthernet0/0/3]port link-type access
[Huawei-GigabitEthernet0/0/3]port default vlan 20
[Huawei-GigabitEthernet0/0/3]q

	
[Huawei]interface g0/0/1
[Huawei-GigabitEthernet0/0/1]port link-type trunk 	
[Huawei-GigabitEthernet0/0/1]port trunk allow-pass vlan all 

3. PC1 PC2 配置IP GW

 测试

 

实验目的

1. 了解单臂路由策略

2. 了解子接口

3. 了解 arp协议

相关指令