行间公式
\begin{equation}
\begin{aligned}
\mathcal{L}_{dif} =& H(f_{\theta_1}(x),f_{\theta_2}(g_1(x)))\\+&H(f_{\theta_2}(x),f_{\theta_1}(g_2(x)))\label{eqn:5}
\end{aligned}
\end{equation}
插入图片(矢量图推荐.eps)
python直接保存的svg可以,但visio画的有时候不行,先转pdf再用inkscape转为.eps文件导入。
插入eps矢量图先导入两个包
\usepackage{graphicx} %use graph format
\usepackage{epstopdf}
然后正常的插图图像
\begin{figure}[htbp}
\centering
\includegraphics[width=0.5\textwidth]{pic/CLDNN.eps}%宽度为页面的50%
\caption{CLDNN Network} %标注
\label{fig:cldnn}
\end{figure}
IEEE Conference 作者信息模板
\author{
\IEEEauthorblockN{1\textsuperscript{st} Name1}
\IEEEauthorblockA{\textit{xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx} \\
Chengdu, China \\
xxxxx@qq.com}
\and
\IEEEauthorblockN{2\textsuperscript{nd} Name2}
\IEEEauthorblockA{\textit{xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx} \\
Chengdu, China \\
xxxxx@qq.con}
\and
\IEEEauthorblockN{3\textsuperscript{st} Name3}
\centerline~ % 让第三个作者居中
\IEEEauthorblockA{\textit{xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx} \\
Chengdu, China \\
xxxxx@qq.com}
}
表格
\renewcommand{\arraystretch}{1.3}%调行距
%\setlength\tabcolsep{3pt}%调列距
\begin{table}[htbp]
\caption{Comparison of method performance}
\begin{center}
\begin{tabular}{|c|c|c|}
\hline
\textbf{Method}&\textbf{Acc:10+500} &\textbf{Acc:50+500}\\\hline
FixMatch&74.18\% &83.53\%\\\hline
SSACGAN-FM&50.77\%&71.00\%\\\hline
Enhanced DCT&\textbf{80.82}\%&\textbf{87.27}\%\\\hline
\end{tabular}
\label{tab:1}
\end{center}
\end{table}
强制符号在下方
\sum\limits_{x=0}^1
\mathop{\mathbb{E}}\limits_{X}
∑ x = 0 1 \sum\limits_{x=0}^1 x=0∑1
E X \mathop{\mathbb{E}}\limits_{X} XE
大括号公式
\lambda (t)=\left\{ \begin{array}{l}
\lambda _{max}exp(-5(\frac{t-T}{80})^2),\quad t\le T\\
\lambda _{max},\quad t>T\\
\end{array} \right.
λ ( t ) = { λ m a x e x p ( − 5 ( t − T 80 ) 2 ) , t ≤ T λ m a x , t > T \lambda (t)=\left\{ \begin{array}{l} \lambda _{max}exp(-5(\frac{t-T}{80})^2),\quad t\le T\\ \lambda _{max},\quad t>T\\ \end{array} \right. λ(t)={λmaxexp(−5(80t−T)2),t≤Tλmax,t>T