6个灯闪烁 Arduino Proteus

 

控制任务和要求

让6个LED按要求工作

 

电路设计

 

程序设计

int Led1 = 1;  //各LED与实验板的联接引脚

int Led2 = 2;

int Led3 = 3;

int Led4 = 4;

int Led5 = 5;

int Led6 = 6;

inttime_gap = 500; //时间间隔500毫秒

 

//工作模式1:正序逐个点亮延时1秒后反序逐个熄灭,循环

  • 1
    点赞
  • 5
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
要在ArduinoProteus中使用四个光敏电阻控制两个舵机,你可以按照以下步骤进行操作: 1. 首先,选择适合的舵机,确保你有两个舵机模块。同时,选择适合的光敏电阻,确保你有四个光敏电阻模块。 2. 在Arduino IDE中编写代码来读取四个光敏电阻的值,并根据这些值来控制两个舵机的位置。你需要使用舵机库来控制舵机的转动。例如,你可以使用Servo库。 下面是一个示例代码,使用四个光敏电阻控制两个舵机的位置: ``` #include <Servo.h> Servo servo1; Servo servo2; int photocellPin1 = A0; int photocellPin2 = A1; int photocellPin3 = A2; int photocellPin4 = A3; void setup() { servo1.attach(9); servo2.attach(10); Serial.begin(9600); } void loop() { int photocellValue1 = analogRead(photocellPin1); int photocellValue2 = analogRead(photocellPin2); int photocellValue3 = analogRead(photocellPin3); int photocellValue4 = analogRead(photocellPin4); int servo1Pos = map(photocellValue1, 0, 1023, 0, 180); int servo2Pos = map(photocellValue2, 0, 1023, 0, 180); servo1.write(servo1Pos); servo2.write(servo2Pos); Serial.print("Photocell 1 Value: "); Serial.println(photocellValue1); Serial.print("Photocell 2 Value: "); Serial.println(photocellValue2); Serial.print("Photocell 3 Value: "); Serial.println(photocellValue3); Serial.print("Photocell 4 Value: "); Serial.println(photocellValue4); delay(100); } ``` 3. 将Arduino连接到Proteus中的虚拟串口。在Proteus中添加一个Arduino模块,并将其连接到计算机的虚拟串口。 4. 在Proteus中添加四个光敏电阻模块和两个舵机模块。你可以在Proteus库中找到各种类型的模块。 5. 连接Arduino、光敏电阻模块和舵机模块。确保你在Proteus中正确连接了Arduino的引脚、光敏电阻模块的引脚和舵机模块的引脚。 6. 运行仿真。在Proteus中启动仿真,你应该能够看到两个舵机根据四个光敏电阻的值进行相应的旋转。 这就是在ArduinoProteus中使用四个光敏电阻控制两个舵机的基本步骤。希望对你有帮助!如果你有其他问题,请随时提问。

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值