arduino-数码管的显示

1.设计：

这个是通过数码管的段选来实现的；

***NOTICE:

要十分注意的是：数码管是有共阴或是共阳之分的，所以正负极不要接反了，不然，arduino的开发板会发烫；

2.代码：（其中用已经封装好的函数，如果要显示相应的数字的话，就直接调用就可以了）

int a = 7;
int b = 6;
int c = 5;
int e= 11;
int d = 10;
int f =8;
int g = 9;
int dp = 4;
 void led_code_init(void) //这个是相应的初始化函数；
{
  int a = 7;
int b = 6;
int c = 5;
int e= 11;
int d = 10;
int f =8;
int g = 9;
}
void setup() {
  led_code_init();
 pinMode(a,OUTPUT);
 pinMode(c,OUTPUT);
 pinMode(b,OUTPUT);
 pinMode(d,OUTPUT);
 pinMode(e,OUTPUT);
 pinMode(f,OUTPUT);
 pinMode(g,OUTPUT);
 pinMode(dp,OUTPUT);
}
void num_one(void)
{
   led_code_init();
  digitalWrite(b,HIGH);
  digitalWrite(c,HIGH);
}
void num_two(void)
{
   led_code_init();
  digitalWrite(a,HIGH);
  digitalWrite(b,HIGH);
  digitalWrite(g,HIGH);
  digitalWrite(e,HIGH);
  digitalWrite(d,HIGH);
}
void num_three(void)
{
  led_code_init();
  digitalWrite(a,HIGH);
  digitalWrite(b,HIGH);
  digitalWrite(g,HIGH);
  digitalWrite(c,HIGH);
  digitalWrite(d,HIGH);
}
void num_four(void)
{
  led_code_init();
  digitalWrite(f,HIGH);
  digitalWrite(g,HIGH);
  digitalWrite(b,HIGH);
  digitalWrite(c,HIGH);
}
void num_five(void)
{
  led_code_init();
  digitalWrite(a,HIGH);
  digitalWrite(f,HIGH);
  digitalWrite(g,HIGH);
  digitalWrite(c,HIGH);
  digitalWrite(d,HIGH);
}
void num_six(void)
{
  led_code_init();
  digitalWrite(a,HIGH);
  digitalWrite(f,HIGH);
  digitalWrite(g,HIGH);
  digitalWrite(e,HIGH);
  digitalWrite(d,HIGH);
  digitalWrite(c,HIGH);
 
}
void num_seven(void)
{
  led_code_init();
 digitalWrite(a,HIGH);
  digitalWrite(b,HIGH);
   digitalWrite(c,HIGH);

}
void num_eight(void)
{
  led_code_init();
   digitalWrite(a,HIGH);
  digitalWrite(f,HIGH);
  digitalWrite(g,HIGH);
  digitalWrite(e,HIGH);
  digitalWrite(d,HIGH);
  digitalWrite(c,HIGH);
  digitalWrite(b,HIGH);
}
void num_nine(void)
{
  led_code_init();
  digitalWrite(a,HIGH);
  digitalWrite(f,HIGH);
  digitalWrite(g,HIGH);
//  digitalWrite(e,HIGH);
  digitalWrite(d,HIGH);
  digitalWrite(c,HIGH);
   digitalWrite(b,HIGH);
}
void loop() {
/* digitalWrite(a,HIGH);//按照这个顺序可以顺时针亮
 digitalWrite(b,HIGH);
 digitalWrite(c,HIGH);
 digitalWrite(d,HIGH);
 digitalWrite(e,HIGH);
 digitalWrite(f,HIGH);
 digitalWrite(g,HIGH);
 digitalWrite(dp,HIGH);*/
 //num_one();
 //num_two();
 //num_three();
// num_four();
//num_five();
//num_six();
//num_seven();
//num_eight();
//led_code_init();
num_nine();
}