Proteus+Keil+STM32+ILI9341+黑白棋设计

Proteus+Keil+STM32+ILI9341+黑白棋设计

B站演示链接:
传送门

相应的资源我也发了，里面有ioc工程，电路图，以及演示视频
资源链接：https://download.csdn.net/download/qq_44624316/13701147
其中我用红色空心圆代表光标，作为下棋子的位置，
有上，下，左，右，确定四个按钮。

黑白棋规则：只能下在能翻转对方棋子的地方，没有棋子可以下那么需要让对方下。

主要还是黑白棋设计的代码部分和显示部分。
我用的是SPI和中断模拟。

显示8*8棋盘的代码：

void showtable()
{
	step = 0;
	cntb = 0;
	cntw = 0;
	int i = 0, j = 0;
	for (i = 0; i < 20; i++)
	{
		for (j = 0; j < 20; j++)
		{
			f[i][j] = 0;
		}
	}
	LCD_DrawLine(47, 95, 47, 225);
	LCD_DrawLine(47, 95, 177, 95);
	LCD_DrawLine(177, 95, 177, 225);
	LCD_DrawLine(47, 225, 177, 225);
	for (i = 96; i < 240; i += 16)
	{
		LCD_DrawLine(48, i, 176, i);
	}
	for (i = 48; i < 192; i += 16)
	{
		LCD_DrawLine(i, 96, i, 224);
	}
	gui_circle(104, 152, BLACK, 5, 1);
	gui_circle(120, 152, BLACK, 5, 0);
	gui_circle(104, 168, BLACK, 5, 0);
	gui_circle(120, 168, BLACK, 5, 1);
	f[4][4] = 1;
	f[5][5] = 1;
	f[5][4] = 2;
	f[4][5] = 2;
	gui_circle(120, 120, RED, 6, 0);
	flag = 1;
}

判断是否可以下棋子的代码，可以下的话进行翻转：

int judge()
{
	int a[]={-1,-1,-1,0,0,1,1,1},b[]={-1,0,1,-1,1,-1,0,1};
	int i = 0, j = 0;
	int kk = 0;
	int isin = 0;
	int cnt = 0;
	int x;
	int y;
	
	cntb = 0;
	cntw = 0;
	if (flag == 1)
	{
		kk = 1;
	}
	else if (flag == 0)
	{
		kk = 2;
	}
	for (i = 0; i < 8; i++)
	{
		cnt = 0;
		int flag1 = 0;
		x = (startx - 8) / 16 - 2 + a[i];
	  y = (starty - 8) / 16 - 5 + b[i];
		while (x > 0 && x < 9 && y > 0 && y < 9 && f[x][y] != kk && f[x][y] != 0)
		{
			flag1 = 1;
			cnt++;
			x += a[i];
			y += b[i];
		}
		if (flag1 == 0)
		{
			continue;
		}
		if (x > 0 && x < 9 && y > 0 && y < 9 && f[x][y] == kk)
		{
			isin = 1;
			int tx = (startx - 8) / 16 - 2 + a[i];
			int ty = (starty - 8) / 16 - 5 + b[i];
			if (kk == 1)
			{
				gui_circle(startx, starty, BLACK, 5, 1);
			}
			else if (kk == 2)
			{
				gui_circle(startx, starty, BLACK, 5, 0);
			}
			f[(startx - 8) / 16 - 2][(starty - 8) / 16 - 5] = kk;
			for (j = 1; j <= cnt; j++)
			{
				int trux = startx + k * a[i] * j;
				int truy = starty + k * b[i] * j;
				f[tx][ty] = f[(startx - 8) / 16 - 2][(starty - 8) / 16 - 5];
				if (f[tx][ty] == 1)
				{
					gui_circle(trux, truy, WHITE, 5, 1);
					gui_circle(trux, truy, BLACK, 5, 1);
				}
				else if (f[tx][ty] == 2)
				{
					gui_circle(trux, truy, WHITE, 5, 1);
					gui_circle(trux, truy, BLACK, 5, 0);
				}
				tx += a[i];
				ty += b[i];
			}
		}
	}
	if (isin == 1)
	{
		for (i = 1; i <= 8; i++)
		{
			for (j = 1; j <= 8; j++)
			{
				if (f[i][j] == 1)
				{
					cntb++;
				}
				else if (f[i][j] == 2)
				{
					cntw++;
				}
			}
		}
		int blg = cntb % 10;
		int bls = cntb / 10;
		int whg = cntw % 10;
		int whs = cntw / 10;
		Show_Str(86,280,WHITE,0XFFFF,(u8 *)"            ",16,0);
		show(bls, 0);
		show(blg, 10);
		Show_Str(104,280,BLACK,0XFFFF,(u8 *)" : ",16,1);
		show(whs, 40);
		show(whg, 50);
	}
	return isin;
}

光标显示的代码：（需要把上一次的光标位置给清除掉

void cleartable()
{
	gui_circle(startx, starty, WHITE, 6, 0);
	if (f[(startx - 8) / 16 - 2][(starty - 8) / 16 - 5] == 1)
	{
		gui_circle(startx, starty, BLACK, 5, 1);
	}
	else if (f[(startx - 8) / 16 - 2][(starty - 8) / 16 - 5] == 2)
	{
		gui_circle(startx, starty, BLACK, 5, 0);
	}
}

用中断实现的代码部分：（按钮按下对应光标移动）

void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
	/***CONFIRM***/
	if(GPIO_Pin == GPIO_PIN_0)
	{
		if(0 == HAL_GPIO_ReadPin(GPIOC,GPIO_PIN_0))
		{
			if (flag == 1)
			{//black
				if (judge() == 1 || step >= 12)
				{
					step = 0;
					flag = 0;
					Show_Str(70,70,WHITE,0XFFFF,(u8 *)"Black go",16,1);
					Show_Str(70,70,WHITE,0XFFFF,(u8 *)"White go",16,1);
					Show_Str(70,70,BLACK,0XFFFF,(u8 *)"White go",16,1);
				}
				else if (judge() == 0)
				{
					step++;
					Show_Str(70,240,BLACK,0XFFFF,(u8 *)"ILLEGAL STEP!",16,1);
					Show_Str(70,240,WHITE,0XFFFF,(u8 *)"ILLEGAL STEP!",16,1);
				}
			}
			else
			{//white
				if (judge() == 1 || step >= 12)
				{
					step = 0;
					flag = 1;
					Show_Str(70,70,WHITE,0XFFFF,(u8 *)"Black go",16,1);
					Show_Str(70,70,WHITE,0XFFFF,(u8 *)"White go",16,1);
					Show_Str(70,70,BLACK,0XFFFF,(u8 *)"Black go",16,1);
				}
				else if (judge() == 0)
				{
					step++;
					Show_Str(70,240,BLACK,0XFFFF,(u8 *)"ILLEGAL STEP!",16,1);
					Show_Str(70,240,WHITE,0XFFFF,(u8 *)"ILLEGAL STEP!",16,1);
				}
			}
		}
	}
	/***UP***/
	if(GPIO_Pin == GPIO_PIN_4)
	{
		if(0 == HAL_GPIO_ReadPin(GPIOC,GPIO_PIN_4))
		{
			cleartable();
			starty = starty - k;
			gui_circle(startx, starty, RED, 6, 0);
		}
	}
	/***LEFT***/
	if(GPIO_Pin == GPIO_PIN_5)
	{
		if(0 == HAL_GPIO_ReadPin(GPIOC,GPIO_PIN_5))
		{
			cleartable();
			startx = startx - k;
			gui_circle(startx, starty, RED, 6, 0);
		}
	}
	/***DOWN***/
	if(GPIO_Pin == GPIO_PIN_6)
	{
		if(0 == HAL_GPIO_ReadPin(GPIOC,GPIO_PIN_6))
		{
			cleartable();
			starty = starty + k;
			gui_circle(startx, starty, RED, 6, 0);
		}
	}
	/***RIGHT***/
	if(GPIO_Pin == GPIO_PIN_8)
	{
		if(0 == HAL_GPIO_ReadPin(GPIOC,GPIO_PIN_8))
		{
			cleartable();
			startx = startx + k;
			gui_circle(startx, starty, RED, 6, 0);
		}
	}
}