Android init.rc启动顺序

kernel启动完成，最后启动init进程，init进程中解析init.rc.

int main(int argc, char** argv) {
	open_console();	  
    if (!strcmp(basename(argv[0]), "ueventd")) {
        return ueventd_main(argc, argv);
    }

    if (!strcmp(basename(argv[0]), "watchdogd")) {
        return watchdogd_main(argc, argv);
    }

    // Clear the umask.
    umask(0);

    add_environment("PATH", _PATH_DEFPATH);

	//kernel启动init进程没有入参，为first stage
    bool is_first_stage = (argc == 1) || (strcmp(argv[1], "--second-stage") != 0);

    // Get the basic filesystem setup we need put together in the initramdisk
    // on / and then we'll let the rc file figure out the rest.
    if (is_first_stage) {
        mount("tmpfs", "/dev", "tmpfs", MS_NOSUID, "mode=0755");
        mkdir("/dev/pts", 0755);
        mkdir("/dev/socket", 0755);
        mount("devpts", "/dev/pts", "devpts", 0, NULL);
        mount("proc", "/proc", "proc", 0, NULL);
        mount("sysfs", "/sys", "sysfs", 0, NULL);
    }

    // We must have some place other than / to create the device nodes for
    // kmsg and null, otherwise we won't be able to remount / read-only
    // later on. Now that tmpfs is mounted on /dev, we can actually talk
    // to the outside world.
    open_devnull_stdio();
    klog_init();
    klog_set_level(KLOG_NOTICE_LEVEL);

    NOTICE("init%s started!\n", is_first_stage ? "" : " second stage");

#ifdef INIT_COREDUMP
	struct rlimit limit;

	limit.rlim_cur = RLIM_INFINITY;
	limit.rlim_max = RLIM_INFINITY;
	if(setrlimit(RLIMIT_CORE, &limit) == 0)
		INFO("setrlimit: RLIM_INFINITY\n");
	else
		INFO("failed to setrlimit.\n");
#endif

    if (!is_first_stage) {
        // Indicate that booting is in progress to background fw loaders, etc.
        close(open("/dev/.booting", O_WRONLY | O_CREAT | O_CLOEXEC, 0000));

        property_init();

        // If arguments are passed both on the command line and in DT,
        // properties set in DT always have priority over the command-line ones.
        process_kernel_dt();
        process_kernel_cmdline();

        // Propogate the kernel variables to internal variables
        // used by init as well as the current required properties.
        export_kernel_boot_props();
    }

    // Set up SELinux, including loading the SELinux policy if we're in the kernel domain.
    selinux_initialize(is_first_stage);

    // If we're in the kernel domain, re-exec init to transition to the init domain now
    // that the SELinux policy has been loaded.
    //second stage 第二次启动init进程，重新启动
    if (is_first_stage) {
        if (restorecon("/init") == -1) {
            ERROR("restorecon failed: %s\n", strerror(errno));
            security_failure();
        }
        char* path = argv[0];
        char* args[] = { path, const_cast<char*>("--second-stage"), nullptr };
        if (execv(path, args) == -1) {
            ERROR("execv(\"%s\") failed: %s\n", path, strerror(errno));
            security_failure();
        }
    }

    // These directories were necessarily created before initial policy load
    // and therefore need their security context restored to the proper value.
    // This must happen before /dev is populated by ueventd.
    INFO("Running restorecon...\n");
    restorecon("/dev");
    restorecon("/dev/socket");
    restorecon("/dev/__properties__");
    restorecon_recursive("/sys");

    epoll_fd = epoll_create1(EPOLL_CLOEXEC);
    if (epoll_fd == -1) {
        ERROR("epoll_create1 failed: %s\n", strerror(errno));
        exit(1);
    }

    property_load_boot_defaults();
    start_property_service();

    init_parse_config_file("/init.rc"); //解析init.rc

	//把early-init相关添加到执行队列中
    action_for_each_trigger("early-init", action_add_queue_tail);

    // Queue an action that waits for coldboot done so we know ueventd has set up all of /dev...
    queue_builtin_action(wait_for_coldboot_done_action, "wait_for_coldboot_done");
    // ... so that we can start queuing up actions that require stuff from /dev.
    queue_builtin_action(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");
    queue_builtin_action(keychord_init_action, "keychord_init");
    queue_builtin_action(console_init_action, "console_init");

    // Trigger all the boot actions to get us started.
    //把init相关添加到执行队列中
    action_for_each_trigger("init", action_add_queue_tail);

    // Repeat mix_hwrng_into_linux_rng in case /dev/hw_random or /dev/random
    // wasn't ready immediately after wait_for_coldboot_done
    queue_builtin_action(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");

    // Don't mount filesystems or start core system services in charger mode.
    char bootmode[PROP_VALUE_MAX];
    if (property_get("ro.bootmode", bootmode) > 0 && strcmp(bootmode, "charger") == 0) {
        action_for_each_trigger("charger", action_add_queue_tail);
    } else {
       //把late-init相关添加到执行队列中
         action_for_each_trigger("late-init", action_add_queue_tail);
    }

    // Run all property triggers based on current state of the properties.
    //属性相关
    queue_builtin_action(queue_property_triggers_action, "queue_property_triggers");

    while (true) {
        if (!waiting_for_exec) {
           // 从队列中取出开始执行对应命令
            execute_one_command();
            restart_processes();
        }

        int timeout = -1;
        if (process_needs_restart) {
            timeout = (process_needs_restart - gettime()) * 1000;
            if (timeout < 0)
                timeout = 0;
        }

        if (!action_queue_empty() || cur_action) {
            timeout = 0;
        }

        bootchart_sample(&timeout);

        epoll_event ev;
        int nr = TEMP_FAILURE_RETRY(epoll_wait(epoll_fd, &ev, 1, timeout));
        if (nr == -1) {
            ERROR("epoll_wait failed: %s\n", strerror(errno));
        } else if (nr == 1) {
            ((void (*)()) ev.data.ptr)();
        }
    }

    return 0;
}

1，early-init
2，init
3，late-init
late-init中有触发其它行为执行

#Mount filesystems and start core system services.
on late-init
//文件系统相关
trigger early-fs
trigger fs
trigger post-fs

# Load properties from /system/ + /factory after fs mount. Place
# this in another action so that the load will be scheduled after the prior
# issued fs triggers have completed.
trigger load_system_props_action

# Now we can mount /data. File encryption requires keymaster to decrypt
# /data, which in turn can only be loaded when system properties are present
trigger post-fs-data
trigger load_persist_props_action

# Remove a file to wake up anything waiting for firmware.
trigger firmware_mounts_complete

//启动
trigger early-boot
trigger boot

在同一段中，init.rc中先执行，import xx.rc中后执行