BGP第一次实验

要求：使用BGP，按照真实网络环境的逻辑配置，实际所有PC间可以互相通讯。

 第一步：配置IP地址和环回

R1：

[r1]int lo0
[r1-LoopBack0]ip address 1.1.1.1 24
[r1-LoopBack0]int g0/0/1
[r1-GigabitEthernet0/0/1]ip address 22.1.1.1 24
Jan 21 2022 11:04:28-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r1-GigabitEthernet0/0/1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip address 12.1.1.1 24
Jan 21 2022 11:04:40-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 

 R2：

[r2]int lo0
[r2-LoopBack0]ip address 2.2.2.2 24
[r2-LoopBack0]int g0/0/0	
[r2-GigabitEthernet0/0/0]ip address 12.1.1.2 24
Jan 21 2022 11:05:22-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r2-GigabitEthernet0/0/0]int g0/0/1
[r2-GigabitEthernet0/0/1]ip address 23.1.1.1 24
Jan 21 2022 11:06:24-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r2-GigabitEthernet0/0/1]int g0/0/2
[r2-GigabitEthernet0/0/2]ip address 13.1.1.1 24
Jan 21 2022 11:06:44-08:00 r2 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 

R3：

[r3]int lo0
[r3-LoopBack0]ip address 3.3.3.3 24
[r3-LoopBack0]int g0/0/0
[r3-GigabitEthernet0/0/0]ip address 13.1.1.2 24
Jan 21 2022 11:07:33-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]ip address 24.1