给设备加密以及配置DHCP

网络组建步骤：

1 、拓扑设计

2 、 IP 地址规划 -- 按照拓扑中划分的网络范围，

     规划网络位不同的 IP 地址

3 、配置

1 ）配置各个节点的 IP 地址

2 ）路由 -- 全网可达

3 ）测试 --ping

4 ）策略

5 ）优化， 安全

6 ）排错

4 、维护和升级

 

dhcp 动态主机获取 ip 地址

成为 dhcp 服务器的条件

1. 必有有真实物理网卡或连接广播域的真实物理接口

2. 必须有合法的 ip 地址

 

实验要求图

 给用户命名（修改为ziyao）

<Huawei>system 

<Huawei>system-view 

Enter system view, return user view with Ctrl+Z.

[Huawei]sys 

[Huawei]sysname ziyao

 

设置登录密码

[ziyao]user-interf 

[ziyao]user-interface cons 

[ziyao]user-interface console 0

[ziyao-ui-console0] au 

[ziyao-ui-console0]authentication-mode pa 

[ziyao-ui-console0]authentication-mode password 

Please configure the login password (maximum length 16):zhou

[ziyao-ui-console0]

 

给不同用户设置权限

[ziyao]aaa

[ziyao-aaa]local-user admin privilege level 15 password cipher momo

[ziyao-aaa]local-user admin service-type terminal 

[ziyao-aaa]local-user guest privilege level 0 password cipher gogo

Info: Add a new user.

[ziyao-aaa]local-user guest service-type termina

 

为路由器接口g0/0/0配置IP开启DHCP服务

<ziyao>int 

<ziyao>syst 

<ziyao>system-view 

Enter system view, return user view with Ctrl+Z.

[ziyao]int 

[ziyao]interface g0/0/0

[ziyao-GigabitEthernet0/0/0]ip address 192.168.1.1 24

Jul 19 2022 18:41:30-08:00 ziyao %%01IFNET/4/LINK_STATE(l)[0]:The line protocol 

IP on the interface GigabitEthernet0/0/0 has entered the UP state. 

[ziyao-GigabitEthernet0/0/0]quit

[ziyao]dhcp en 

[ziyao]dhcp enable 

Info: The operation may take a few seconds. Please wait for a moment.done.

[ziyao]ip pool xiaozhou

Info: It's successful to create an IP address pool.

[ziyao-ip-pool-xiaozhou]network

                                ^

Error:Incomplete command found at '^' position.

[ziyao-ip-pool-xiaozhou]network 192.168.1.0 mask 255.255.255.0

[ziyao-ip-pool-xiaozhou]ga 

[ziyao-ip-pool-xiaozhou]gateway-list 192.168.1.1

[ziyao-ip-pool-xiaozhou]dn 

[ziyao-ip-pool-xiaozhou]dns-list 8.8.8.8 114.114.114.114

[ziyao-ip-pool-xiaozhou]quit

[ziyao]inter 

[ziyao]interface g0/0/0

[ziyao-GigabitEthernet0/0/0]dhcp select global

 

为接口g0/0/1配置IP开启DHCP服务

<Huawei>sys 

<Huawei>system-view 

Enter system view, return user view with Ctrl+Z.

[Huawei]inter 

[Huawei]interface g0/0/1

[Huawei-GigabitEthernet0/0/1]ip address 172.16.1.1 24

Jul 19 2022 19:15:05-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[2]:The line protocol

 IP on the interface GigabitEthernet0/0/1 has entered the UP state. 

[Huawei-GigabitEthernet0/0/1]quit

[Huawei]dhcp enable

Info: The operation may take a few seconds. Please wait for a moment.done.

[Huawei]ip pool xiao

Info: It's successful to create an IP address pool.

[Huawei-ip-pool-xiao]network 172,16.1.0 mask 255.255.255.0

                             ^

Error: Wrong parameter found at '^' position.

[Huawei-ip-pool-xiao]network 172.16.1.0 mask 255.255.255.0

[Huawei-ip-pool-xiao]gatew 

[Huawei-ip-pool-xiao]gateway-list 172.16.1.1

[Huawei-ip-pool-xiao]dns 

[Huawei-ip-pool-xiao]dns-list 8.8.8.8 114.114.114.114

[Huawei-ip-pool-xiao]quit

[Huawei]inter 

[Huawei]interface g0/0/1

[Huawei-GigabitEthernet0/0/1]dhcp select global

[Huawei-GigabitEthernet0/0/1]

 

结果图