华为eNSP配置Telnet服务

Telnet

本地密码登录

[R1]int GigabitEthernet 0/0/0           #进入接口
[R1-GigabitEthernet0/0/0]ip address 192.168.10.2 255.255.255.0  #在接口里面配置IP地址
[R1-GigabitEthernet0/0/0]undo shutdown      #开启接口
[R1]user-interface vty 0 4                  #允许五个用户登录
[R1-ui-vty-0-4]authentication-mode password #设置密码
please configure the login password (maximum length 16:):123456
[R1-ui-vty-0-4]set authentication password simple 123   #密码设置错了可以修改密码
[R1-ui-vty-0-4]quit             #退出
[R1]super password cipher 123456    #设置特权密码为123456

测试

<R1>telnet 192.168.10.2
  Press CTRL_] to quit telnet mode
  Trying 192.168.10.2 ...
  Connected to 192.168.10.2 ...			
<R1>super					#提权，不提权无法进入特权模式
  Password: 123456			#敲上刚刚打上去的特权模式密码
  Now user privilege is level 3, and only those commands whose level is
  equal to or less than this level can be used.
  Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE
<R1>sys
Enter system view, return user view with Ctrl+Z.
[R1]