实验要求:
- 全网互通;
- PC1可以访问Telnet R1,不能ping R1
- PC1不能访问Telnet R2,但可以ping R2
- PC2和PC1相反
一、配置IP地址,达到全网通
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.254 24
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]ip add 192.168.2.1 24
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 192.168.2.2 24
[R2]ip route-static 192.168.1.0 24 192.168.2.1 //静态路由
[PC1]int g0/0/0
[PC1-GigabitEthernet0/0/0]ip add 192.168.1.1 24
[PC1]ip route-static 0.0.0.0 0 192.168.1.254 //模拟网关
[PC2]int g0/0/0
[PC2-GigabitEthernet0/0/0]ip add 192.168.1.2 24
[PC2]ip route-static 0.0.0.0 0 192.168.1.254 //模拟网关
二、配置telnet协议
R1中:
[R1]telnet server enable
[R1]aaa
[R1-aaa]local-user lingyou privilege level 15 password cipher 520lingyou
[R1-aaa]local-user lingyou service-type telnet
[R1]user-interface vty 0 4
[R1-ui-vty0-4]authentication-mode aaa
R2中:
[R2]aaa
[R2-aaa]local-user linyou privilege level 15 password cipher 520linyou
[R2-aaa]local-user linyou service-type telnet
[R2]user-interface vty 0 4
[R2-ui-vty0-4]authentication-mode aaa
三、配置ACL协议
整个网络中R1可以调节全部地方,所以在R1上配ACL协议:
[R1]acl 3000
[R1-acl-adv-3000]rule deny icmp source 192.168.1.1 0.0.0.0 destination 192.168.2.1 0.0.0.0
[R1-acl-adv-3000]rule deny icmp source 192.168.1.1 0.0.0.0 destination 192.168.1.254 0.0.0.0
[R1-acl-adv-3000]rule deny tcp source 192.168.1.1 0.0.0.0 destination 192.168.2.2 0.0.0.0 destination-port eq 23
[R1-acl-adv-3000]rule deny tcp source 192.168.1.2 0.0.0.0 destination 192.168.2.1 0.0.0.0 destination-port eq 23
[R1-acl-adv-3000]rule deny tcp source 192.168.1.1 0.0.0.0 destinatio 192.168.1.254 0.0.0.0 destination-port eq 23
[R1-acl-adv-3000]rule deny icmp source 192.168.1.2 0.0.0.0 destination 192.168.2.2 0.0.0.0
在此中输入:display this //查询是否添加成功
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]traffic-filter inbound acl 3000
四、测试
(1)PC1 ping R2:
达到实验要求,PC1 成功ping通 R2。
(2)PC1 ping R1:
达到实验要求,成功限制PC1 不能ping通 R1。
(3)PC1 去远程控制 R2:
达到实验要求,PC1 不能远程登入 R2.。
(4)PC1 去远程控制 R1:
达到实验要求,PC1 可以远程登入 R1。
实验完成所有要求,实验结束。