Unable to start GeoClue client: GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: Geolocation dis

更新系统之后，突然发现Ubuntu的护眼软件不工作了，出现下面错误：

Trying location provider `geoclue2'...
Using provider `geoclue2'.
Unable to start GeoClue client: GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: Geolocation disabled for UID 1000.
Unable to connect to GeoClue.
Unable to get location from provider.

原因是系统配置那里关掉了location services的权限：

打开即可。

配置redshift的方法是：（配置前务必先关掉redshift）

gedit ~/.config/redshift.conf

我自己的文件内容是：

; Global settings for redshift
[redshift]
; Set the day and night screen temperatures
temp-day=3700
temp-night=3500

; Enable/Disable a smooth transition between day and night
; 0 will cause a direct change from day to night screen temperature.
; 1 will gradually increase or decrease the screen temperature.
transition=1

; Set the screen brightness. Default is 1.0.
;brightness=0.9
; It is also possible to use different settings for day and night
; since version 1.8.
;brightness-day=0.7
;brightness-night=0.4
; Set the screen gamma (for all colors, or each color channel
; individually)
gamma=0.8
;gamma=0.8:0.7:0.8
; This can also be set individually for day and night since
; version 1.10.
;gamma-day=0.8:0.7:0.8
;gamma-night=0.6

; Set the location-provider: 'geoclue', 'geoclue2', 'manual'
; type 'redshift -l list' to see possible values.
; The location provider settings are in a different section.
location-provider=manual

; Set the adjustment-method: 'randr', 'vidmode'
; type 'redshift -m list' to see all possible values.
; 'randr' is the preferred method, 'vidmode' is an older API.
; but works in some cases when 'randr' does not.
; The adjustment method settings are in a different section.
adjustment-method=randr

; Configuration of the location-provider:
; type 'redshift -l PROVIDER:help' to see the settings.
; ex: 'redshift -l manual:help'
; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
; are negative numbers.
[manual]
lat=48.1
lon=11.6

; Configuration of the adjustment-method
; type 'redshift -m METHOD:help' to see the settings.
; ex: 'redshift -m randr:help'
; In this example, randr is configured to adjust screen 1.
; Note that the numbering starts from 0, so this is actually the
; second screen. If this option is not specified, Redshift will try
; to adjust _all_ screens.
[randr]
screen=0

然后重启redshift

redshift &

搞定。

参考链接：
1.调整Linux显示器
2.Redshift官网说明