实时音频编解码之九 CELP编码

本文深入探讨了CELP(Code-Excited Linear Prediction)编码技术,介绍了感知加权、编码解码过程及后滤波的细节。CELP通过改进LP编码,构建激励信号码本,提高语音编码质量和自然度,尤其在语音/非语音过渡帧的处理上表现出色。在解码端,通过码本选择、增益调整和滤波合成来重构语音信号。感知加权滤波器利用人耳掩蔽效应优化误差信号,后滤波则进一步提升合成语音的质量。
摘要由CSDN通过智能技术生成

本文谢绝任何形式转载,谢谢。

第二章CELP(code-excited linear prediction)

LP编码方法是基于声道滤波模型的建模,激励源是声门或噪声,其有两个限制,其一输入激励信号为白噪声,其二严格区分语音和非语音段,只对语音段使用LPC算法,CELP是基于人发声的源-激励模型,和基于LP的编码相比在这两个方面都有改进,构建激励信号码本使激励信号不再是白噪声,使用长短时估计方法而不再严格区分语音/非语音,长时预测滤波器是针对基频而言的,它只是一个具有长延迟的线性预测器CELP是主流语音编码器(AMR,EVS,G.718,speex以及opus)的基础。
请添加图片描述
图: CELP语音生成模型

解码端首先根据激励索引值从码本中获取激励信号序列,然后根据编码侧发来的增益值将激励信号序列幅度缩放为合适的大小,然后经过长短时的组合滤波,长时滤波器反应的是信号的周期性,短时滤波器反应的是信号包络,激励信号码本可以是固定或自适应的脉冲或白噪声。

由于CEL

CELP数字话音编码是一个相对复杂的算法,需要大量的数学和信号处理知识才能实现。以下是一个简单的基于MATLAB的CELP编码代码示例,仅供参考: ```matlab % 读取语音信号 [x, Fs] = audioread('speech.wav'); % 设置CELP编码器参数 frame_length = 20; % 每帧长度(毫秒) frame_shift = 10; % 帧移(毫秒) LPC_order = 10; % 线性预测分析阶数 excitation_order = 10; % 激励码本大小 codebook_size = 1024; % 预测系数码本大小 max_iterations = 10; % 最大迭代次数 % 分帧 frame_length = round(frame_length/1000*Fs); frame_shift = round(frame_shift/1000*Fs); num_frames = floor((length(x)-frame_length)/frame_shift) + 1; frames = zeros(num_frames, frame_length); for i=1:num_frames frames(i,:) = x((i-1)*frame_shift+1:(i-1)*frame_shift+frame_length); end % 初始化CELP编码器 LPC_coeffs = zeros(num_frames, LPC_order+1); excitation_indices = zeros(num_frames, excitation_order); codebook_indices = zeros(num_frames, frame_length); residuals = zeros(num_frames, frame_length); % 循环编码每一帧 for i=1:num_frames % 线性预测分析 [LPC_coeffs(i,:), residuals(i,:)] = lpc(frames(i,:), LPC_order); % 计算激励 excitation = zeros(1, frame_length); for j=1:excitation_order [~, idx] = min(sum((repmat(frames(i,:)', 1, codebook_size) ... - repmat(LPC_coeffs(i,2:end)', 1, codebook_size) ... .* codebook).^2)); excitation(idx) = 1; excitation_indices(i,j) = idx; end % 计算预测系数 [codebook, ~] = lbg(LPC_coeffs(i,2:end)', codebook_size, max_iterations); for j=1:frame_length [~, idx] = min(sum((repmat(frames(i,:)', 1, codebook_size) ... - repmat(LPC_coeffs(i,2:end)', 1, codebook_size) ... .* codebook).^2)); codebook_indices(i,j) = idx; end % 合成帧 synth_frame = filter([0 -LPC_coeffs(i,2:end)], 1, excitation); synth_frame = synth_frame + filter(1, [1 -LPC_coeffs(i,2:end)], residuals(i,:)); end % 保存CELP编码结果 save('speech.celp', 'LPC_coeffs', 'excitation_indices', 'codebook_indices', 'residuals'); % 解码语音信号 load('speech.celp', 'LPC_coeffs', 'excitation_indices', 'codebook_indices', 'residuals'); num_frames = size(LPC_coeffs, 1); synth_signal = zeros(1, (num_frames-1)*frame_shift+frame_length); for i=1:num_frames % 合成激励 excitation = zeros(1, frame_length); for j=1:excitation_order excitation(excitation_indices(i,j)) = 1; end % 合成预测系数 codebook = lbg(LPC_coeffs(i,2:end)', codebook_size, max_iterations); for j=1:frame_length synth_frame = filter([0 -LPC_coeffs(i,2:end)], 1, excitation(j)); synth_frame = synth_frame + filter(1, [1 -LPC_coeffs(i,2:end)], ... codebook(:,codebook_indices(i,j))'); synth_signal((i-1)*frame_shift+1:(i-1)*frame_shift+frame_length) = ... synth_signal((i-1)*frame_shift+1:(i-1)*frame_shift+frame_length) + synth_frame; end end % 写入解码结果 audiowrite('speech_decoded.wav', synth_signal, Fs); ``` 这个代码示例仅提供了一个基本的CELP编码和解码过程,实际的CELP编码器需要考虑更多的细节和优化,例如使用更高效的搜索算法和码本设计算法等。
评论 1
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

shichaog

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值