昇思25天学习打卡营第19天|munger85

Diffusion扩散模型

它并没有那么复杂，它们都将噪声从一些简单分布转换为数据样本，Diffusion也是从纯噪声开始通过一个神经网络学习逐步去噪，最终得到一个实际图像

def rearrange(head, inputs):
b, hc, x, y = inputs.shape
c = hc // head
return inputs.reshape((b, head, c, x * y))

def rsqrt(x):
res = ops.sqrt(x)
return ops.inv(res)

def randn_like(x, dtype=None):
if dtype is None:
dtype = x.dtype
res = ops.standard_normal(x.shape).astype(dtype)
return res

def randn(shape, dtype=None):
if dtype is None:
dtype = ms.float32
res = ops.standard_normal(shape).astype(dtype)
return res

def randint(low, high, size, dtype=ms.int32):
res = ops.uniform(size, Tensor(low, dtype), Tensor(high, dtype), dtype=dtype)
return res

def exists(x):
return x is not None

def default(val, d):
if exists(val):
return val
return d() if callable(d) else d

def _check_dtype(d1, d2):
if ms.float32 in (d1, d2):
return ms.float32
if d1 == d2:
return d1
raise ValueError(‘dtype is not supported.’)

class Residual(nn.Cell):
def init(self, fn):
super().init()
self.fn = fn

def construct(self, x, *args, **kwargs):
    return self.fn(x, *args, **kwargs) + x

这些是辅助的方法
def Upsample(dim):
return nn.Conv2dTranspose(dim, dim, 4, 2, pad_mode=“pad”, padding=1)

def Downsample(dim):
return nn.Conv2d(dim, dim, 4, 2, pad_mode=“pad”, padding=1)
上面是上，下采样
由于噪声是水平的，那么位置就用sin来表示
class SinusoidalPositionEmbeddings(nn.Cell):
def init(self, dim):
super().init()
self.dim = dim
half_dim = self.dim // 2
emb = math.log(10000) / (half_dim - 1)
emb = np.exp(np.arange(half_dim) * - emb)
self.emb = Tensor(emb, ms.float32)

def construct(self, x):
    emb = x[:, None] * self.emb[None, :]
    emb = ops.concat((ops.sin(emb), ops.cos(emb)), axis=-1)
    return emb

class Block(nn.Cell):
def init(self, dim, dim_out, groups=1):
super().init()
self.proj = nn.Conv2d(dim, dim_out, 3, pad_mode=“pad”, padding=1)
self.proj = c(dim, dim_out, 3, padding=1, pad_mode=‘pad’)
self.norm = nn.GroupNorm(groups, dim_out)
self.act = nn.SiLU()

def construct(self, x, scale_shift=None):
    x = self.proj(x)
    x = self.norm(x)

    if exists(scale_shift):
        scale, shift = scale_shift
        x = x * (scale + 1) + shift

    x = self.act(x)
    return x

class ConvNextBlock(nn.Cell):
def init(self, dim, dim_out, *, time_emb_dim=None, mult=2, norm=True):
super().init()
self.mlp = (
nn.SequentialCell(nn.GELU(), nn.Dense(time_emb_dim, dim))
if exists(time_emb_dim)
else None
)

    self.ds_conv = nn.Conv2d(dim, dim, 7, padding=3, group=dim, pad_mode="pad")
    self.net = nn.SequentialCell(
        nn.GroupNorm(1, dim) if norm else nn.Identity(),
        nn.Conv2d(dim, dim_out * mult, 3, padding=1, pad_mode="pad"),
        nn.GELU(),
        nn.GroupNorm(1, dim_out * mult),
        nn.Conv2d(dim_out * mult, dim_out, 3, padding=1, pad_mode="pad"),
    )

    self.res_conv = nn.Conv2d(dim, dim_out, 1) if dim != dim_out else nn.Identity()

def construct(self, x, time_emb=None):
    h = self.ds_conv(x)
    if exists(self.mlp) and exists(time_emb):
        assert exists(time_emb), "time embedding must be passed in"
        condition = self.mlp(time_emb)
        condition = condition.expand_dims(-1).expand_dims(-1)
        h = h + condition

    h = self.net(h)
    return h + self.res_conv(x)

这哦深奥了。但是就是构建unet
unet是图像的编解码器，可以捕捉细节

class Attention(nn.Cell):
def init(self, dim, heads=4, dim_head=32):
super().init()
self.scale = dim_head ** -0.5
self.heads = heads
hidden_dim = dim_head * heads

    self.to_qkv = nn.Conv2d(dim, hidden_dim * 3, 1, pad_mode='valid', has_bias=False)
    self.to_out = nn.Conv2d(hidden_dim, dim, 1, pad_mode='valid', has_bias=True)
    self.map = ops.Map()
    self.partial = ops.Partial()

def construct(self, x):
    b, _, h, w = x.shape
    qkv = self.to_qkv(x).chunk(3, 1)
    q, k, v = self.map(self.partial(rearrange, self.heads), qkv)

    q = q * self.scale

    # 'b h d i, b h d j -> b h i j'
    sim = ops.bmm(q.swapaxes(2, 3), k)
    attn = ops.softmax(sim, axis=-1)
    # 'b h i j, b h d j -> b h i d'
    out = ops.bmm(attn, v.swapaxes(2, 3))
    out = out.swapaxes(-1, -2).reshape((b, -1, h, w))

    return self.to_out(out)

class LayerNorm(nn.Cell):
def init(self, dim):
super().init()
self.g = Parameter(initializer(‘ones’, (1, dim, 1, 1)), name=‘g’)

def construct(self, x):
    eps = 1e-5
    var = x.var(1, keepdims=True)
    mean = x.mean(1, keep_dims=True)
    return (x - mean) * rsqrt((var + eps)) * self.g

class LinearAttention(nn.Cell):
def init(self, dim, heads=4, dim_head=32):
super().init()
self.scale = dim_head ** -0.5
self.heads = heads
hidden_dim = dim_head * heads
self.to_qkv = nn.Conv2d(dim, hidden_dim * 3, 1, pad_mode=‘valid’, has_bias=False)

    self.to_out = nn.SequentialCell(
        nn.Conv2d(hidden_dim, dim, 1, pad_mode='valid', has_bias=True),
        LayerNorm(dim)
    )

    self.map = ops.Map()
    self.partial = ops.Partial()

def construct(self, x):
    b, _, h, w = x.shape
    qkv = self.to_qkv(x).chunk(3, 1)
    q, k, v = self.map(self.partial(rearrange, self.heads), qkv)

    q = ops.softmax(q, -2)
    k = ops.softmax(k, -1)

    q = q * self.scale
    v = v / (h * w)

    # 'b h d n, b h e n -> b h d e'
    context = ops.bmm(k, v.swapaxes(2, 3))
    # 'b h d e, b h d n -> b h e n'
    out = ops.bmm(context.swapaxes(2, 3), q)

    out = out.reshape((b, -1, h, w))
    return self.to_out(out)
    这是注意力模块，也就是网络的权重吧
    class PreNorm(nn.Cell):
def __init__(self, dim, fn):
    super().__init__()
    self.fn = fn
    self.norm = nn.GroupNorm(1, dim)

def construct(self, x):
    x = self.norm(x)
    return self.fn(x)
    把U-Net的卷积/注意层与群归一化

class Unet(nn.Cell):
def init(
self,
dim,
init_dim=None,
out_dim=None,
dim_mults=(1, 2, 4, 8),
channels=3,
with_time_emb=True,
convnext_mult=2,
):
super().init()

    self.channels = channels

    init_dim = default(init_dim, dim // 3 * 2)
    self.init_conv = nn.Conv2d(channels, init_dim, 7, padding=3, pad_mode="pad", has_bias=True)

    dims = [init_dim, *map(lambda m: dim * m, dim_mults)]
    in_out = list(zip(dims[:-1], dims[1:]))

    block_klass = partial(ConvNextBlock, mult=convnext_mult)

    if with_time_emb:
        time_dim = dim * 4
        self.time_mlp = nn.SequentialCell(
            SinusoidalPositionEmbeddings(dim),
            nn.Dense(dim, time_dim),
            nn.GELU(),
            nn.Dense(time_dim, time_dim),
        )
    else:
        time_dim = None
        self.time_mlp = None

    self.downs = nn.CellList([])
    self.ups = nn.CellList([])
    num_resolutions = len(in_out)

    for ind, (dim_in, dim_out) in enumerate(in_out):
        is_last = ind >= (num_resolutions - 1)

        self.downs.append(
            nn.CellList(
                [
                    block_klass(dim_in, dim_out, time_emb_dim=time_dim),
                    block_klass(dim_out, dim_out, time_emb_dim=time_dim),
                    Residual(PreNorm(dim_out, LinearAttention(dim_out))),
                    Downsample(dim_out) if not is_last else nn.Identity(),
                ]
            )
        )

    mid_dim = dims[-1]
    self.mid_block1 = block_klass(mid_dim, mid_dim, time_emb_dim=time_dim)
    self.mid_attn = Residual(PreNorm(mid_dim, Attention(mid_dim)))
    self.mid_block2 = block_klass(mid_dim, mid_dim, time_emb_dim=time_dim)

    for ind, (dim_in, dim_out) in enumerate(reversed(in_out[1:])):
        is_last = ind >= (num_resolutions - 1)

        self.ups.append(
            nn.CellList(
                [
                    block_klass(dim_out * 2, dim_in, time_emb_dim=time_dim),
                    block_klass(dim_in, dim_in, time_emb_dim=time_dim),
                    Residual(PreNorm(dim_in, LinearAttention(dim_in))),
                    Upsample(dim_in) if not is_last else nn.Identity(),
                ]
            )
        )

    out_dim = default(out_dim, channels)
    self.final_conv = nn.SequentialCell(
        block_klass(dim, dim), nn.Conv2d(dim, out_dim, 1)
    )

def construct(self, x, time):
    x = self.init_conv(x)

    t = self.time_mlp(time) if exists(self.time_mlp) else None

    h = []

    for block1, block2, attn, downsample in self.downs:
        x = block1(x, t)
        x = block2(x, t)
        x = attn(x)
        h.append(x)

        x = downsample(x)

    x = self.mid_block1(x, t)
    x = self.mid_attn(x)
    x = self.mid_block2(x, t)

    len_h = len(h) - 1
    for block1, block2, attn, upsample in self.ups:
        x = ops.concat((x, h[len_h]), 1)
        len_h -= 1
        x = block1(x, t)
        x = block2(x, t)
        x = attn(x)

        x = upsample(x)
    return self.final_conv(x)
    总是就是为了把各个零件合在一起称为大网络
    正向扩散
    def linear_beta_schedule(timesteps):
beta_start = 0.0001
beta_end = 0.02
return np.linspace(beta_start, beta_end, timesteps).astype(np.float32)
正向传播就是加噪声。

扩散200步

timesteps = 200

定义 beta schedule

betas = linear_beta_schedule(timesteps=timesteps)

定义 alphas

alphas = 1. - betas
alphas_cumprod = np.cumprod(alphas, axis=0)
alphas_cumprod_prev = np.pad(alphas_cumprod[:-1], (1, 0), constant_values=1)

sqrt_recip_alphas = Tensor(np.sqrt(1. / alphas))
sqrt_alphas_cumprod = Tensor(np.sqrt(alphas_cumprod))
sqrt_one_minus_alphas_cumprod = Tensor(np.sqrt(1. - alphas_cumprod))

计算 q(x_{t-1} | x_t, x_0)

posterior_variance = betas * (1. - alphas_cumprod_prev) / (1. - alphas_cumprod)

p2_loss_weight = (1 + alphas_cumprod / (1 - alphas_cumprod)) ** -0.
p2_loss_weight = Tensor(p2_loss_weight)

def extract(a, t, x_shape):
b = t.shape[0]
out = Tensor(a).gather(t, -1)
return out.reshape(b, *((1,) * (len(x_shape) - 1)))

下载猫猫图像

url = ‘https://mindspore-website.obs.cn-north-4.myhuaweicloud.com/notebook/datasets/image_cat.zip’
path = download(url, ‘./’, kind=“zip”, replace=True)

但是这里就只有1张照片啊。
为什么要做这么复杂的操作

通过上面的代码正向了，加了噪声了。
每一步加的噪声后是不一样的

去噪声的就是unet，他学习了如何区分噪声和真实的有意义的图。
训练开始

下载MNIST数据集

url = ‘https://mindspore-website.obs.cn-north-4.myhuaweicloud.com/notebook/datasets/dataset.zip’
path = download(url, ‘./’, kind=“zip”, replace=True)
这些是一些小的衣服图

transforms = [
RandomHorizontalFlip(),
ToTensor(),
lambda t: (t * 2) - 1
]

dataset = dataset.project(‘image’)
dataset = dataset.shuffle(64)
dataset = dataset.map(transforms, ‘image’)
dataset = dataset.batch(16, drop_remainder=True)

训练这个unet

定义动态学习率

lr = nn.cosine_decay_lr(min_lr=1e-7, max_lr=1e-4, total_step=10*3750, step_per_epoch=3750, decay_epoch=10)

定义 Unet模型

unet_model = Unet(
dim=image_size,
channels=channels,
dim_mults=(1, 2, 4,)
)

name_list = []
for (name, par) in list(unet_model.parameters_and_names()):
name_list.append(name)
i = 0
for item in list(unet_model.trainable_params()):
item.name = name_list[i]
i += 1

定义优化器

optimizer = nn.Adam(unet_model.trainable_params(), learning_rate=lr)
loss_scaler = DynamicLossScaler(65536, 2, 1000)
这个是调整loss，不让他太大或者太小。

定义前向过程

def forward_fn(data, t, noise=None):
loss = p_losses(unet_model, data, t, noise)
return loss

计算梯度

grad_fn = ms.value_and_grad(forward_fn, None, optimizer.parameters, has_aux=False)

梯度更新

def train_step(data, t, noise):
loss, grads = grad_fn(data, t, noise)
optimizer(grads)
return loss

这和以往的训练类似
那么正向传播的就是模糊的图

由于像素太低，你得用代码变小，才看得出来这是个衣服