DESCRIPTION
The CM6533/CM6533N/CM6533X1/CM6533DH is a USB 2.0 audio chip built-in 8051 for flexible applications.With integrated Tri-Colors PWM LED driver and two(2)-channel ADC/DAC and S/PDIF interface that makes it suitable for headset,docking,speaker and microphone applications.The internal 8051 can also be developed to a lot of different applications,such as Microsoft™Lync/Skype/VoIP device,Android Phone or Tablet/Slate docking device.The CM6533/CM6533N/CM6533X1/CM6533DH is compatible with USB Audio Class 1.0 and USB 2.0 Full-Speed,thus it can plug&play without any additional software installation on major operating systems.The internal DAC and ADC support from 8~96 KHz sampling rate and 16/24 bits resolution.
The CM6533/CM6533N/CM6533X1/CM6533DH integrates equalizer on both playback and recording paths to compensate the frequency response of microphone and headphone.
The CM6533/CM6533N/CM6533X1/CM6533DH alsointegrates 256K Byte flash(Including 32KB F/W programming size)and crystal but requires few passive components tomake a finish product.Thus,it can save the total BOM cost and PCB area can be smaller.
FEATURES
USB 2.0 Full-Speed compliant
USB Audio Class 1.0 compliant
USB Human Interface Device(HID)Class 1.11 compliant
Two(2)-channel DAC for audio output interface
Two(2)-channel ADC for audio input interface
Supports Digital Microphone interface
Built-in S/PDIF transmitter
Built-in Equalizer on both playback and recording paths
Built-in AGC(Auto Gain Control)on recording path
Supports dual tone generator
Supports USB suspend/resume/reset functions
Supports control,interrupt,bulk,and isochronous data transfers
Embedded 1T 8051 with 32K Byte SRAM and 256K Byte flash(Including 32KB F/W programming size)
Supports OMTP and CTIA auto switch on a 4-pole jack
Integrated Tri-Colors PWM LED driver
Master/Slave H/W I2C/SPI/UART control interface for external audio devices or FLASH access
Supports embedded oscillator without external crystal
Built-in 30mW R=32headphone amplifier
On chip watchdog timer