探测封包类型

/**
 * eth_type_trans - determine the packet's protocol ID.
 * @skb: received socket data
 * @dev: receiving network device
 *
 * The rule here is that we
 * assume 802.3 if the type field is short enough to be a length.
 * This is normal practice and works for any 'now in use' protocol.
 */
__be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev)
{
unsigned short _service_access_point;
const unsigned short *sap;
const struct ethhdr *eth;


skb->dev = dev;
skb_reset_mac_header(skb);


eth = (struct ethhdr *)skb->data;
skb_pull_inline(skb, ETH_HLEN);


if (unlikely(is_multicast_ether_addr_64bits(eth->h_dest))) {
if (ether_addr_equal_64bits(eth->h_dest, dev->broadcast))
skb->pkt_type = PACKET_BROADCAST;
else
skb->pkt_type = PACKET_MULTICAST;
}
else if (unlikely(!ether_addr_equal_64bits(eth->h_dest,
  dev->dev_addr)))
skb->pkt_type = PACKET_OTHERHOST;


/*
* Some variants of DSA tagging don't have an ethertype field
* at all, so we check here whether one of those tagging
* variants has been configured on the receiving interface,
* and if so, set skb->protocol without looking at the packet.
*/
if (unlikely(netdev_uses_dsa(dev)))
return htons(ETH_P_XDSA);


if (likely(eth_proto_is_802_3(eth->h_proto)))
return eth->h_proto;


/*
*      This is a magic hack to spot IPX packets. Older Novell breaks
*      the protocol design and runs IPX over 802.3 without an 802.2 LLC
*      layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
*      won't work for fault tolerant netware but does for the rest.
*/
sap = skb_header_pointer(skb, 0, sizeof(*sap), &_service_access_point);
if (sap && *sap == 0xFFFF)
return htons(ETH_P_802_3);


/*
*      Real 802.2 LLC
*/
return htons(ETH_P_802_2);

}

/* Packet types */


#define PACKET_HOST 0/* To us */
#define PACKET_BROADCAST 1/* To all */
#define PACKET_MULTICAST 2/* To group */
#define PACKET_OTHERHOST 3/* To someone else */
#define PACKET_OUTGOING 4/* Outgoing of any type */
#define PACKET_LOOPBACK 5/* MC/BRD frame looped back */
#define PACKET_USER 6/* To user space */
#define PACKET_KERNEL 7/* To kernel space */
/* Unused, PACKET_FASTROUTE and PACKET_LOOPBACK are invisible to user space */
#define PACKET_FASTROUTE 6/* Fastrouted frame */


/* Packet socket options */


#define PACKET_ADD_MEMBERSHIP 1
#define PACKET_DROP_MEMBERSHIP 2
#define PACKET_RECV_OUTPUT 3
/* Value 4 is still used by obsolete turbo-packet. */
#define PACKET_RX_RING 5
#define PACKET_STATISTICS 6
#define PACKET_COPY_THRESH 7
#define PACKET_AUXDATA 8
#define PACKET_ORIGDEV 9
#define PACKET_VERSION 10
#define PACKET_HDRLEN 11
#define PACKET_RESERVE 12
#define PACKET_TX_RING 13
#define PACKET_LOSS 14
#define PACKET_VNET_HDR 15
#define PACKET_TX_TIMESTAMP 16
#define PACKET_TIMESTAMP 17
#define PACKET_FANOUT 18
#define PACKET_TX_HAS_OFF 19
#define PACKET_QDISC_BYPASS 20
#define PACKET_ROLLOVER_STATS 21
#define PACKET_FANOUT_DATA 22


#define PACKET_FANOUT_HASH 0
#define PACKET_FANOUT_LB 1
#define PACKET_FANOUT_CPU 2
#define PACKET_FANOUT_ROLLOVER 3
#define PACKET_FANOUT_RND 4
#define PACKET_FANOUT_QM 5
#define PACKET_FANOUT_CBPF 6
#define PACKET_FANOUT_EBPF 7
#define PACKET_FANOUT_FLAG_ROLLOVER 0x1000
#define PACKET_FANOUT_FLAG_DEFRAG 0x8000

static inline __be16 ax25_type_trans(struct sk_buff *skb, struct net_device *dev)
{
skb->dev      = dev;
skb_reset_mac_header(skb);
skb->pkt_type = PACKET_HOST;
return htons(ETH_P_AX25);
}