一起来了解下全志A40i芯片详细参数

全志A40i处理器代表了Allwin在智能工业控制领域的最新成就。该处理器适用于需要3D图形、高级视频处理的应用程序。用户接口丰富、质量高、功耗低、系统集成度高。

A40i主要应用于基于视觉交互的工业控制产品。

A40i芯片特性:

可以在4车道MIPIDSI显示器、RGB面板或双通道LVDS面板上显示内容。也支持CVBS-OUT和HDMIV1.4

支持双cmos传感器并行接口和4通道cvbs-in,能够执行多通道视频记录。

A40I达到工业级标准,运行温度达到AEC-Q100级标准。

集成音频编解码器,24位/192 KHz DAC回放,支持I2S/PCM接口连接外部音频编解码器。离子高达32位/192kHz。

为了降低总系统成本,A40I具有广泛的硬件外设支持,支持配置阵列,例如3*USB2.0、GMAC、EMAC、SATA、2*TSC、PS2、RTP、4*SDHC等

支持Linux3.10、Android7.1和上面的系统。

A40i芯片框图:

A40i芯片参数:

CPU Architecture
• Quad-core ARM Cortex-A7 MPCore Processor
• ARMv7 ISA standard ARM instruction set
• Thumb-2 Technology
• Jazeller RCT
• NEON Advanced SIMD
• VFPv4 floating point
• Hardware virtualization support
• Large Physical Address Extensions(LPAE)
• JTAG debug
•One general timer for per CPU
• 32KB Instruction and 32KB Data L1 cache for per CPU
• 256KB L2 cache

GPU Architecture
• 3D
‒ Mali400 MP2 GPU
‒ Support OpenGL ES 2.0 / OpenVG 1.1 standard
• 2D
‒ Support BLT and ROP2/3/4
‒ Support 90° /180° /270° rotation
‒ Support mirror/ alpha (plane and pixel alpha) /color key
‒ Format conversion: ARGB 8888/4444/1555, RGB565, MONO 1/2/4/8bpp, Palette 1/2/4/8bpp (input only), YUV

Memory Subsystem
SDRAM
• Compatible with JEDEC standard DDR2/DDR3/DDR3L/LPDDR2/LPDDR3 SDRAM
• Up to 2GB address space
• 16 address signal lines and 3 bank signal lines
• 32-bit bus width

NAND Flash
• Supports SLC/MLC NAND and EF-NAND
• Supports SDR/Toggle DDR/ONFI DDR NAND interface
• 16 address signal lines and 3 bank signal lines
• up to 8-bit data bus width

SD/MMC Interface
• Up to four SMHC controllers
• Comply with eMMC standard specification V5.0
• Comply with SDIO card specification V3.0
• 1/4/8-bits bus width

USB
• One USB 2.0 OTG
• Two EHCI/OHCI compliant Hosts

Video Decoding
• Support picture size up to 3840x2160
• Support decoding speed up to 1080p@60fps
• Supported multi-formats: MPEG1/2, MPEG4 SP/ASP, WMV, H.263 including Sorenson Spark, H.264 BP/MP/HP, VP6/8, AVS/AVS+, JPEG/MJPEG, etc

Video Encoding
• H.264 HP up to 1080p@45fps
• JPEG baseline: picture size up to 4096x4096 
• Alpha blending
• Thumb generation
• 4x2 scaling ratio from 1/16 to 64 arbitrary non-integer ratio

Video Output
• HDMI 1.4 transmitter with HDCP up to 1080p@60fps
• Supports 4 lanes MIPI DSI up to 1080p@60fps
• Supports LVDS interface up to 1920 x 1080@60fps
• Supports RGB interface up to 1920 x 1080@60fps
• Supports CVBS out, 4-ch CVBS, 1-ch YPbPr or 1-ch VGA

Analog Audio Output
• Stereo audio DAC
• Stereo capless headphone drivers
• One low-noise analog microphone bias
• Dedicated headphone outputs
• Two mixers to meet different requirements

Video Input
• Supports 4-ch analog CVBS in
• Supports Dual parallel interfaces:CSI0 and CSI1
• Supports CCIR656 protocol for each CSI
• Supports 16-bit BT1120 interface for CSI0
• Supports 24-bit RGB/YUV444 input for CSI1

Analog Audio Input
• Support four analog audio inputs
• Stereo audio ADC

EMAC
• Support 10/100Mbps MII PHY interface
• Comply with the IEEE 802.3-2002 standard

Digital Audio
• One I2S compliant audio interface, supporting 8-channel and 2-channel input
• One PCM, supporting linear sample (8-bit or 16-bit), 8-bit u-law and A-law companded sample
• One AC97 audio codec, supporting 2-channel and 6-channel audio data output

GMAC
• Support 10/100/1000Mbps RGMII/MII PHY interface
• Comply with the IEEE 802.3-2002 standard

DMA
• 16 channels:8 channels with normal DMA,8 channels with dedicated DMA
• Support data width of 8/16/32 bits
• Support linear and IO address modes
• Support data transfer types with memory-to-memory, memory-to-peripheral, peripheral-to-memory

PWM
• 8 PWM channels outputs
• Support cycle mode and pulse mode
• The pre-scale is from 1 to 64

Smart Card Reader
• One smart card reader controller supporting ISO/IEC 7816-3 and EMV2000 specifications
• Support synchronous and any other non-ISO 7816 and non-EMV cards

CIR
• A flexible receiver for IR remote
• Up to two IR controllers
• Programmable FIFO thresholds

UART
• Up to 8 UART controllers
• 64-Bytes Transmit and receive data FIFOs for all UART
• Compliant with industry-standard 16550 UARTs
• Support Infrared Data Association(IrDA) 1.0 SIRR

SATA
• One SATA Host controller
• Support SATA 1.5Gb/s and SATA 3.0Gb/s
• Comply with SATA spec 2.6
• Support external SATA(eSATA)

Keypad
• One keypad matrix interface up to 8 rows and 8 colums
• Interrupt for key press or key release
• Internal debouncing filter to prevent switching noises

SPI
• Up to 4 SPI controllers

TWI
• Up to 5 TWIs(Two Wire Interface) controllers
• Support Standard mode (up to 100K bps) and Fast mode (up to 400K bps)

TWI
• Up to 5 TWIs(Two Wire Interface) controllers
• Support Standard mode (up to 100K bps) and Fast mode (up to 400K bps)

Operating Temperature
• - 40℃~ 85℃

参考资料可借鉴A40i datasheet(一牛网论坛)

  • 3
    点赞
  • 17
    收藏
    觉得还不错? 一键收藏
  • 2
    评论
### 回答1: 介绍了一下全志A40i的SDK下载,整个过程还是比较简单的,需要根据具体的需求选择对应的操作系统平台进行下载。 首先,需要进入全志官网,再点击“技术支持”模块,在下拉列表中选择“SDK下载”进行进入。 进入之后,会看到下面有四个选项按钮,分别是Android SDK、Linux SDK、Windows SDK和Mac SDK。如果开发者需要进行Android应用的开发,可以选择“Android SDK”,如果需要进行嵌入式Linux系统的开发,则需要选择“Linux SDK”。 在选择好SDK所需平台之后,再输入A40i的型号,点击“搜索”进行搜索。搜索结果会出现该型号所对应的SDK版本,可以根据自己的具体需求进行下载。下载过程中,需要提供一些信息进行认证。 下载完成之后,一般会有相关的安装教程和使用文档,需要开发者仔细阅读,以便更好地使用SDK进行开发工作。 ### 回答2: 全志a40i是一种高性能、低功耗的芯片,广泛运用于智能设备、嵌入式系统等领域。为了方便开发者使用全志a40i芯片全志公司提供了相应的SDK(软件开发工具包)下载服务。 全志a40i的SDK下载可以通过以下步骤完成: 首先,在电脑的浏览器中输入“全志a40i sdk下载”,并点击搜索。找到全志公司官方网站,并进入该网站。 接着,在官网的搜索栏中输入“a40i”,点击搜索按钮,找到与全志a40i芯片相关的资料。 然后,在资料列表中找到“SDK”或者“软件开发工具包”下载链接,点击该链接即可进行下载。 最后,下载完成后,将该SDK安装到电脑中,并参考官方文档进行使用,即可进行全志a40i芯片的开发。 需要注意的是,下载全志a40i的SDK前,开发者需要先参考官方文档,了解芯片型号的特性、接口等基本信息,以便更好地使用SDK开发出适合该芯片的智能设备、嵌入式系统等应用。

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论 2
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值