Es/N0、EbN0与SNR区别

对复输入信号而言,Es/No (dB) = 10*log10(Tsymbol / Tsampling) + SNR(dB)   (1)
对实输入信号而言,Es/No (dB) = 10*log10(2 * Tsymbol / Tsampling) + SNR(dB)  (2)
其中Tsymbol为信号的符号周期,Tsampling为信号的采样周期。


对于复输入信号而言,matlab的help是这样推导(1)的:
Es/No(dB) = 10*log10((S*Tsymbol)/(N/Bn)) 
           = 10*log10((Tsymbol*Fs)*(S/N))
           = 10*log10((Tsymbol/Tsampling)+SNR(dB)
其中,
S = Input signal power, in watts
N = Noise power, in watts
Bn = Noise bandwidth, in Hz
Fs = Sampling frequency, in Hz.

Note that Bn= Fs = 1/Tsampling


For complex input signals, the AWGN Channel block relates Eb/N0, Es/N0, and SNR according to the following equations:
Es/N0 = (Tsym/Tsamp)·SNR
Es/N0 = Eb/N0 + 10log10(k)  in dB


where
      Es = Signal energy (Joules)
      Eb = Bit energy (Joules)
      N0 = Noise power spectral density (Watts/Hz)
      Tsym is the Symbol period parameter of the block in Es/No mode
      k is the number of information bits per input symbol
      Tsamp is the inherited sample time of the block, in seconds


For real signal inputs, the AWGN Channel block relates Es/N0 and SNR according to the following equation:
Es/N0 = 0.5 (Tsym/Tsamp)·SNR


Note that the equation for the real case differs from the corresponding equation for the complex case by a factor of 2. This is so because the block uses a noise power spectral density of N0/2 Watts/Hz for real input signals, versus N0 Watts/Hz for complex signals.

  • 0
    点赞
  • 3
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值