一、实验原理
· 多相滤波器组：将PCM样本变换到32个子带的频域信号
· 心理声学模型:计算信号中不可听觉感知的部分，计算出噪声的遮蔽效应，对这部分被掩蔽的听不见的信号不进行传输
· 比特分配器：根据心理声学模型的计算结果，为每个子带信号分配比特数
· 装帧：产生出一个数据帧，帧要求与MPEG-l兼容
·
·
· 心理声学模型：
计算信号中不可听觉感知的部分。
时频分析的矛盾：
1、通过子带分析滤波器组使信号具有高的时间分辨率，确保在短暂冲击信号情况下，编码的声音信号具有足够高的质量
2、又可以使信号通过FFT运算具有高的频率分辨率，因为掩蔽阈值是从功率谱密度推出来的。
在低频子带中，为了保护音调和共振峰的结构，就要求用较小的量化阶、较多的量化级数，即分配较多的位数来表示样本值。而话音中的摩擦音和类似噪声的声音，通常出现在高频子带中，对它分配较少的位数。n
将样本变换到频域->确定声压级别->考虑安静时阈值->将音频信号分解成“乐音(tones)” 和“非乐音/噪声”部分：因为两种信号的掩蔽能力不同->音调和非音调掩蔽成分的消除->单个掩蔽阈值的计算->全局掩蔽阈值的计算->每个子带的掩蔽阈值->计算每个子带信号掩蔽比(signal-to-maskratio, SMR)
使整帧和每个子带的总噪声—掩蔽比最小。
算法：循环，直到没有比特可用：
1、对每个子带计算掩蔽-噪声比MNR，MNR = SNR –SMR (dB)
2、对最低MNR的子带分配比特，使获益最大的子带的量化级别增加一级
3、重新计算分配了更多比特子带的MNR
实验代码
· #include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include "common.h"
#include "encoder.h"
#include "musicin.h"
#include "options.h"
#include "audio_read.h"
#include "bitstream.h"
#include "mem.h"
#include "crc.h"
#include "psycho_n1.h"
#include "psycho_0.h"
#include "psycho_1.h"
#include "psycho_2.h"
#include "psycho_3.h"
#include "psycho_4.h"
#include "encode.h"
#include "availbits.h"
#include "subband.h"
#include "encode_new.h"
#include "m2aenc.h"
#include <assert.h>
FILE *musicin;
Bit_stream_struc bs;
char *programName;
char toolameversion[10] = "0.2l";
void global_init (void)
{
glopts.usepsy = TRUE;
glopts.usepadbit = TRUE;
glopts.quickmode = FALSE;
glopts.quickcount = 10;
glopts.downmix = FALSE;
glopts.byteswap = FALSE;
glopts.channelswap = FALSE;
glopts.vbr = FALSE;
glopts.vbrlevel = 0;
glopts.athlevel = 0;
glopts.verbosity = 2;
}
/************************************************************************
*
* main
*
* PURPOSE: MPEG II Encoder with
* psychoacoustic models 1 (MUSICAM) and 2 (AT&T)
*
* SEMANTICS: One overlapping frame of audio of up to 2 channels are
* processed at a time in the following order:
* (associated routines are in parentheses)
*
* 1. Filter sliding window of data to get 32 subband
* samples per channel.
* (window_subband,filter_subband)
*
* 2. If joint stereo mode, combine left and right channels
* for subbands above #jsbound#.
* (combine_LR)
*
* 3. Calculate scalefactors for the frame, and
* also calculate scalefactor select information.
* (*_scale_factor_calc)
*
* 4. Calculate psychoacoustic masking levels using selected
* psychoacoustic model.
* (psycho_i, psycho_ii)
*
* 5. Perform iterative bit allocation for subbands with low
* mask_to_noise ratios using masking levels from step 4.
* (*_main_bit_allocation)
*
* 6. If error protection flag is active, add redundancy for
* error protection.
* (*_CRC_calc)
*
* 7. Pack bit allocation, scalefactors, and scalefactor select
*headerrmation onto bitstream.
* (*_encode_bit_alloc,*_encode_scale,transmission_pattern)
*
* 8. Quantize subbands and pack them into bitstream
* (*_subband_quantization, *_sample_encoding)
*
************************************************************************/
int frameNum = 0;
int main (int argc, char **argv)
{
typedef double SBS[2][3][SCALE_BLOCK][SBLIMIT];
SBS *sb_sample;
typedef double JSBS[3][SCALE_BLOCK][SBLIMIT];
JSBS *j_sample;
typedef double IN[2][HAN_SIZE];
IN *win_que;
typedef unsigned int SUB[2][3][SCALE_BLOCK][SBLIMIT];
SUB *subband;
frame_info frame;
frame_header header;
char original_file_name[MAX_NAME_SIZE];
char encoded_file_name[MAX_NAME_SIZE];
short **win_buf;
static short buffer[2][1152];
static unsigned int bit_alloc[2][SBLIMIT], scfsi[2][SBLIMIT];
static unsigned int scalar[2][3][SBLIMIT], j_scale[3][SBLIMIT];
static double smr[2][SBLIMIT], lgmin[2][SBLIMIT], max_sc[2][SBLIMIT];
// FLOAT snr32[32];
short sam[2][1344]; /* was [1056]; */
int model, nch, error_protection;
static unsigned int crc;
int sb, ch, adb;
unsigned long frameBits, sentBits = 0;
unsigned long num_samples;
int lg_frame;
int i;
/* Used to keep the SNR values for the fast/quick psy models */
static FLOAT smrdef[2][32];
static int psycount = 0;
extern int minimum;
time_t start_time, end_time;
int total_time;
C_TRACE = fopen("C_trace.txt", "w");
sb_sample = (SBS *) mem_alloc (sizeof (SBS), "sb_sample");
j_sample = (JSBS *) mem_alloc (sizeof (JSBS), "j_sample");
win_que = (IN *) mem_alloc (sizeof (IN), "Win_que");
subband = (SUB *) mem_alloc (sizeof (SUB), "subband");
win_buf = (short **) mem_alloc (sizeof (short *) * 2,"win_buf");
/* clear buffers */
memset ((char *) buffer, 0, sizeof (buffer));
memset ((char *) bit_alloc, 0, sizeof (bit_alloc));
memset ((char *) scalar, 0, sizeof (scalar));
memset ((char *) j_scale, 0, sizeof (j_scale));
memset ((char *) scfsi, 0, sizeof (scfsi));
memset ((char *) smr, 0, sizeof (smr));
memset ((char *) lgmin, 0, sizeof (lgmin));
memset ((char *) max_sc, 0, sizeof (max_sc));
//memset ((char *) snr32, 0, sizeof (snr32));
memset ((char *) sam, 0, sizeof (sam));
global_init ();
header.extension = 0;
frame.header = &header;
frame.tab_num = -1; /* no table loaded */
frame.alloc = NULL;
header.version = MPEG_AUDIO_ID; /* Default: MPEG-1 */
total_time = 0;
time(&start_time);
programName = argv[0];
if (argc == 1) /* no command-line args */
short_usage ();
else
parse_args (argc, argv, &frame, &model, &num_samples,original_file_name,
encoded_file_name);
print_config (&frame, &model, original_file_name,encoded_file_name);
/* this will load the alloc tables and do some other stuff */
hdr_to_frps (&frame);
nch = frame.nch;
error_protection = header.error_protection;
while (get_audio (musicin, buffer, num_samples, nch, &header) >0) {
if (glopts.verbosity > 1)
if (++frameNum % 10 == 0)
fprintf (stderr, "[%4u]\r", frameNum);
fflush (stderr);
win_buf[0] = &buffer[0][0];
win_buf[1] = &buffer[1][0];
adb = available_bits (&header, &glopts); //
#if CTRACE
if (frameNum == 1)
fprintf(C_TRACE, "avilibable bits for No.%d:%d\n", frameNum,adb);
fprintf(C_TRACE, "\n");
#endif
lg_frame = adb / 8;
if (header.dab_extension) {
/* in 24 kHz we always have 4 bytes */
if (header.sampling_frequency == 1)
header.dab_extension = 4;
/* You must have one frame in memory if you are in DAB mode */
/* in conformity of the norme ETS 300 401 http://www.etsi.org */
/* see bitstream.c */
if (frameNum == 1)
minimum = lg_frame + MINIMUM;
adb -= header.dab_extension * 8 + header.dab_length * 8 +16;
}
{
int gr, bl, ch;
/* New polyphase filter
Combines windowing and filtering. Ricardo Feb'03 */
for( gr = 0; gr < 3; gr++ )
for ( bl = 0; bl < 12; bl++ )
for ( ch = 0; ch < nch; ch++ )
WindowFilterSubband( &buffer[ch][gr * 12 * 32 + 32 * bl], ch,
· //
&(*sb_sample)[ch][gr][bl][0] );
}
#ifdef REFERENCECODE
{
/* Old code. left here for reference */
int gr, bl, ch;
for (gr = 0; gr < 3; gr++)
for (bl = 0; bl < SCALE_BLOCK; bl++)
for (ch = 0; ch < nch; ch++) {
window_subband (&win_buf[ch], &(*win_que)[ch][0], ch);
filter_subband (&(*win_que)[ch][0],&(*sb_sample)[ch][gr][bl][0]);
}
}
#endif
#ifdef NEWENCODE
scalefactor_calc_new(*sb_sample, scalar, nch, frame.sblimit);
find_sf_max (scalar, &frame, max_sc);
if (frame.actual_mode == MPG_MD_JOINT_STEREO) {
/* this way we calculate more mono than we need */
/* but it is cheap */
combine_LR_new (*sb_sample, *j_sample, frame.sblimit);
scalefactor_calc_new (j_sample, &j_scale, 1, frame.sblimit);
}
#else
scale_factor_calc (*sb_sample, scalar, nch, frame.sblimit);
· //
pick_scale (scalar, &frame, max_sc);
if (frame.actual_mode == MPG_MD_JOINT_STEREO) {
/* this way we calculate more mono than we need */
/* but it is cheap */
combine_LR (*sb_sample, *j_sample, frame.sblimit);
scale_factor_calc (j_sample, &j_scale, 1,frame.sblimit);
}
#endif
if ((glopts.quickmode == TRUE) && (++psycount %glopts.quickcount != 0)) {
/* We're using quick mode, so we're only calculating themodel every
'quickcount' frames. Otherwise, just copy theold ones across */
for (ch = 0; ch < nch; ch++) {
for (sb = 0; sb < SBLIMIT; sb++)
smr[ch][sb] = smrdef[ch][sb];
}
} else {
/* calculate the psymodel */
switch (model) {
case -1:
psycho_n1 (smr, nch);
break;
case 0: /* Psy Model A */
psycho_0 (smr, nch, scalar, (FLOAT)s_freq[header.version][header.sampling_frequency] * 1000);
·
break;
case 1:
psycho_1 (buffer, max_sc, smr, &frame);
break;
case 2:
for (ch = 0; ch < nch; ch++) {
psycho_2 (&buffer[ch][0], &sam[ch][0], ch, &smr[ch][0],//snr32,
(FLOAT) s_freq[header.version][header.sampling_frequency] *
1000, &glopts);
}
break;
case 3:
/* Modified psy model 1 */
psycho_3 (buffer, max_sc, smr, &frame, &glopts);
break;
case 4:
/* Modified Psycho Model 2 */
for (ch = 0; ch < nch; ch++) {
psycho_4 (&buffer[ch][0], &sam[ch][0], ch, &smr[ch][0], //snr32,
(FLOAT) s_freq[header.version][header.sampling_frequency] *
1000, &glopts);
}
break;
case 5:
/* Model 5 comparse model 1 and 3 */
psycho_1 (buffer, max_sc, smr, &frame);
fprintf(stdout,"1 ");
smr_dump(smr,nch);
psycho_3 (buffer, max_sc, smr, &frame, &glopts);
fprintf(stdout,"3 ");
smr_dump(smr,nch);
break;
case 6:
/* Model 6 compares model 2 and 4 */
for (ch = 0; ch < nch; ch++)
psycho_2 (&buffer[ch][0], &sam[ch][0], ch, &smr[ch][0],//snr32,
(FLOAT) s_freq[header.version][header.sampling_frequency] *
1000, &glopts);
fprintf(stdout,"2 ");
smr_dump(smr,nch);
for (ch = 0; ch < nch; ch++)
psycho_4 (&buffer[ch][0], &sam[ch][0], ch, &smr[ch][0], //snr32,
(FLOAT) s_freq[header.version][header.sampling_frequency] *
1000, &glopts);
fprintf(stdout,"4 ");
smr_dump(smr,nch);
break;
case 7:
fprintf(stdout,"Frame: %i\n",frameNum);
/* Dump the SMRs for all models */
·
psycho_1 (buffer, max_sc, smr, &frame);
fprintf(stdout,"1");
smr_dump(smr, nch);
psycho_3 (buffer, max_sc, smr, &frame, &glopts);
fprintf(stdout,"3");
smr_dump(smr,nch);
for (ch = 0; ch < nch; ch++)
psycho_2 (&buffer[ch][0], &sam[ch][0], ch, &smr[ch][0],//snr32,
(FLOAT) s_freq[header.version][header.sampling_frequency] *
1000, &glopts);
fprintf(stdout,"2");
smr_dump(smr,nch);
for (ch = 0; ch < nch; ch++)
psycho_4 (&buffer[ch][0], &sam[ch][0], ch, &smr[ch][0], //snr32,
(FLOAT) s_freq[header.version][header.sampling_frequency] *
1000, &glopts);
fprintf(stdout,"4");
smr_dump(smr,nch);
break;
case 8:
/* Compare 0 and 4 */
·
psycho_n1 (smr, nch);
fprintf(stdout,"0");
smr_dump(smr,nch);
for (ch = 0; ch < nch; ch++)
psycho_4 (&buffer[ch][0], &sam[ch][0], ch, &smr[ch][0], //snr32,
(FLOAT) s_freq[header.version][header.sampling_frequency] *
1000, &glopts);
fprintf(stdout,"4");
smr_dump(smr,nch);
break;
default:
fprintf (stderr, "Invalid psy model specification: %i\n", model);
exit (0);
}
if (glopts.quickmode == TRUE)
/* copy the smr values and reuse them later */
for (ch = 0; ch < nch; ch++) {
for (sb = 0; sb < SBLIMIT; sb++)
smrdef[ch][sb] = smr[ch][sb];
}
if (glopts.verbosity > 4)
smr_dump(smr, nch);
}
#ifdef NEWENCODE
sf_transmission_pattern (scalar, scfsi, &frame);
main_bit_allocation_new (smr, scfsi, bit_alloc, &adb,&frame, &glopts);
//main_bit_allocation (smr, scfsi, bit_alloc, &adb,&frame, &glopts);
if (error_protection)
CRC_calc (&frame, bit_alloc, scfsi, &crc);
write_header (&frame, &bs);
//encode_info (&frame, &bs);
if (error_protection)
putbits (&bs, crc, 16);
write_bit_alloc (bit_alloc, &frame, &bs);
//encode_bit_alloc (bit_alloc, &frame, &bs);
write_scalefactors(bit_alloc, scfsi, scalar, &frame,&bs);
//encode_scale (bit_alloc, scfsi, scalar, &frame, &bs);
subband_quantization_new (scalar, *sb_sample, j_scale, *j_sample,bit_alloc,
*subband, &frame);
//subband_quantization (scalar, *sb_sample, j_scale, *j_sample,bit_alloc,
// *subband, &frame);
write_samples_new(*subband, bit_alloc, &frame, &bs);
//sample_encoding (*subband, bit_alloc, &frame, &bs);
#else
transmission_pattern (scalar, scfsi, &frame);
main_bit_allocation (smr, scfsi, bit_alloc, &adb, &frame,&glopts);
if (error_protection)
CRC_calc (&frame, bit_alloc, scfsi, &crc);
encode_info (&frame, &bs);
if (error_protection)
encode_CRC (crc, &bs);
encode_bit_alloc (bit_alloc, &frame, &bs);
#if CTRACE
if (frameNum == 1)
{
fprintf(C_TRACE, "下面输出比特分配：\n");
for (int i = 0; i < frame.sblimit; i++)
fprintf(C_TRACE, "ch[0].subband[%d]: %d bits\n",i,bit_alloc[0][i]);
//putbits(bs, bit_alloc[k][i], (*alloc)[i][0].bits);
fprintf(C_TRACE, "\n");
}
#endif
encode_scale (bit_alloc, scfsi, scalar, &frame, &bs);
#if CTRACE
if (frameNum == 1)
{
fprintf(C_TRACE, "下面输出比例因子选择：\n");
for (int i = 0; i < frame.sblimit; i++)
fprintf(C_TRACE, "Ch[0].subband[%d] scfsi: %d\n",i,scfsi[0][i]);
fprintf(C_TRACE, "\n");
}
#endif
#if CTRACE
if (frameNum == 1)
{
fprintf(C_TRACE, "下面输出比例因子：\n");
for (int i = 0; i < frame.sblimit; i++)
{
fprintf(C_TRACE, "Ch[0].subband[%d] scalar: %d\t %d\t %d\n", i,scalar[0][0][i], scalar[0][1][i], scalar[0][2][i]);
}
fprintf(C_TRACE, "\n");
}
#endif
subband_quantization (scalar, *sb_sample, j_scale, *j_sample,bit_alloc,
*subband, &frame);
sample_encoding (*subband, bit_alloc, &frame, &bs);
#endif
/* If not all the bits were used, write out a stack of zeros */
for (i = 0; i < adb; i++)
put1bit (&bs, 0);
if (header.dab_extension) {
/* Reserve some bytes for X-PAD in DAB mode */
putbits (&bs, 0, header.dab_length * 8);
for (i = header.dab_extension - 1; i >= 0; i--) {
CRC_calcDAB (&frame, bit_alloc, scfsi, scalar, &crc, i);
/* this crc is for the previous frame in DAB mode */
if (bs.buf_byte_idx + lg_frame < bs.buf_size)
bs.buf[bs.buf_byte_idx + lg_frame] = crc;
/* reserved 2 bytes for F-PAD in DAB mode */
putbits (&bs, crc, 8);
}
putbits (&bs, 0, 16);
}
frameBits = sstell (&bs) - sentBits;
if (frameBits % 8) { /* a program failure */
fprintf (stderr, "Sent %ld bits = %ld slots plus%ld\n", frameBits,
frameBits / 8, frameBits % 8);
fprintf (stderr, "If you are reading this, theprogram is broken\n");
fprintf (stderr, "email [mfc at NOTplanckenerg.com]without the NOT\n");
fprintf (stderr, "with the command line arguments andother info\n");
exit (0);
}
sentBits += frameBits;
}
close_bit_stream_w (&bs);
if ((glopts.verbosity > 1) && (glopts.vbr == TRUE)) {
int i;
#ifdef NEWENCODE
extern int vbrstats_new[15];
#else
extern int vbrstats[15];
#endif
fprintf (stdout, "VBR stats:\n");
for (i = 1; i < 15; i++)
fprintf (stdout, "%4i ",bitrate[header.version][i]);
fprintf (stdout, "\n");
for (i = 1; i < 15; i++)
#ifdef NEWENCODE
fprintf (stdout,"%4i ",vbrstats_new[i]);
#else
fprintf (stdout, "%4i ", vbrstats[i]);
#endif
fprintf (stdout, "\n");
}
fprintf (stderr,
"Avg slots/frame = %.3f; b/smp = %.2f; bitrate = %.3f kbps\n",
(FLOAT) sentBits / (frameNum * 8),
(FLOAT) sentBits / (frameNum * 1152),
(FLOAT) sentBits / (frameNum * 1152) *
s_freq[header.version][header.sampling_frequency]);
if (fclose (musicin) != 0) {
fprintf (stderr, "Could not close \"%s\".\n",original_file_name);
exit (2);
}
fprintf (stderr, "\nDone\n");
time(&end_time);
total_time = end_time - start_time;
printf("total time is %d\n", total_time);
exit (0);
}
/************************************************************************
*
* print_config
*
* PURPOSE: Prints the encoding parameters used
*
************************************************************************/
void print_config (frame_info * frame, int *psy, char *inPath,
char *outPath)
{
frame_header *header = frame->header;
if (glopts.verbosity == 0)
return;
fprintf (stderr,"--------------------------------------------\n");
fprintf (stderr, "Input File : '%s' %.1f kHz\n",
(strcmp (inPath, "-") ? inPath : "stdin"),
s_freq[header->version][header->sampling_frequency]);
fprintf (stderr, "Output File: '%s'\n",
(strcmp (outPath, "-") ? outPath : "stdout"));
fprintf (stderr, "%d kbps ",bitrate[header->version][header->bitrate_index]);
fprintf (stderr, "%s ", version_names[header->version]);
if (header->mode != MPG_MD_JOINT_STEREO)
fprintf (stderr, "Layer II %s Psycho model=%d (Mode_Extension=%d)\n",
mode_names[header->mode], *psy, header->mode_ext);
else
fprintf (stderr, "Layer II %s Psy model %d \n",mode_names[header->mode],
*psy);
fprintf (stderr,"[De-emph:%s\tCopyright:%s\tOriginal:%s\tCRC:%s]\n",
((header->emphasis) ? "On" : "Off"),
((header->copyright) ? "Yes" : "No"),
((header->original) ? "Yes" : "No"),
((header->error_protection) ? "On" : "Off"));
fprintf (stderr,"[Padding:%s\tByte-swap:%s\tChanswap:%s\tDAB:%s]\n",
((glopts.usepadbit) ? "Normal" : "Off"),
((glopts.byteswap) ? "On" : "Off"),
((glopts.channelswap) ? "On" : "Off"),
((glopts.dab) ? "On" : "Off"));
if (glopts.vbr == TRUE)
fprintf (stderr, "VBR Enabled. Using MNR boost of%f\n", glopts.vbrlevel);
fprintf(stderr,"ATH adjustment %f\n",glopts.athlevel);
fprintf (stderr,"--------------------------------------------\n");
}
/************************************************************************
*
* usage
*
* PURPOSE: Writes command line syntax to the file specified by #stderr#
*
************************************************************************/
void usage (void)
{ /* print syntax & exit */
/* FIXME: maybe have an option to display better definitions of helpcodes, and
long equivalents of the flags */
fprintf (stdout, "\ntooLAME version %s(http://toolame.sourceforge.net)\n",
toolameversion);
fprintf (stdout, "MPEG Audio Layer II encoder\n\n");
fprintf (stdout, "usage: \n");
fprintf (stdout, "\t%s [options] <input><output>\n\n", programName);
fprintf (stdout, "Options:\n");
fprintf (stdout, "Input\n");
fprintf (stdout, "\t-s sfrq input smpl rate in kHz (dflt %4.1f)\n",
DFLT_SFQ);
fprintf (stdout, "\t-a downmix from stereo tomono\n");
fprintf (stdout, "\t-x force byte-swapping ofinput\n");
fprintf (stdout, "\t-g swap channels of inputfile\n");
fprintf (stdout, "Output\n");
fprintf (stdout, "\t-m mode channel mode : s/d/j/m (dflt %4c)\n",
DFLT_MOD);
fprintf (stdout, "\t-p psy psychoacoustic model 0/1/2/3(dflt %4u)\n",
DFLT_PSY);
fprintf (stdout, "\t-b br total bitrate in kbps (dflt 192)\n");
fprintf (stdout, "\t-v lev vbr mode\n");
fprintf (stdout, "\t-l lev ATH level (dflt 0)\n");
fprintf (stdout, "Operation\n");
// fprintf (stdout, "\t-f fast mode (turns offpsy model)\n");
// deprecate the -f switch. use "-p 0" instead.
fprintf (stdout,
"\t-q num quick mode. only calculate psy model every numframes\n");
fprintf (stdout, "Misc\n");
fprintf (stdout, "\t-d emp de-emphasis n/5/c (dflt %4c)\n",
DFLT_EMP);
fprintf (stdout, "\t-c mark ascopyright\n");
fprintf (stdout, "\t-o mark asoriginal\n");
fprintf (stdout, "\t-e add errorprotection\n");
fprintf (stdout, "\t-r force padding bit/frameoff\n");
fprintf (stdout, "\t-D len add DAB extensions of length[len]\n");
fprintf (stdout, "\t-t talkativity 0=nomessages (dflt 2)");
fprintf (stdout, "Files\n");
fprintf (stdout,
"\tinput input sound file. (WAV,AIFF,PCM or use'/dev/stdin')\n");
fprintf (stdout, "\toutput output bit stream of encodedaudio\n");
fprintf (stdout,
"\n\tAllowable bitrates for 16, 22.05 and 24kHz sampleinput\n");
fprintf (stdout,
"\t8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144,160\n");
fprintf (stdout,
"\n\tAllowable bitrates for 32, 44.1 and 48kHz sampleinput\n");
fprintf (stdout,
"\t32, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320,384\n");
exit (1);
}
/*********************************************
* void short_usage(void)
********************************************/
void short_usage (void)
{
/* print a bit of info about the program */
fprintf (stderr, "tooLAME version %s\n(http://toolame.sourceforge.net)\n",
toolameversion);
fprintf (stderr, "MPEG Audio Layer II encoder\n\n");
fprintf (stderr, "USAGE: %s [options] <infile>[outfile]\n\n", programName);
fprintf (stderr, "Try \"%s -h\" for moreinformation.\n", programName);
exit (0);
}
/*********************************************
* void proginfo(void)
********************************************/
void proginfo (void)
{
/* print a bit of info about the program */
fprintf (stderr,
"\ntooLAME version 0.2g (http://toolame.sourceforge.net)\n");
fprintf (stderr, "MPEG Audio Layer II encoder\n\n");
}
/************************************************************************
*
* parse_args
*
* PURPOSE: Sets encoding parameters to the specifications of the
* command line. Default settings are used for parameters
* not specified in the command line.
*
* SEMANTICS: The command line is parsed according to the following
* syntax:
*
* -m is followed by the mode
* -p is followed by the psychoacoustic model number
* -s is followed by the sampling rate
* -b is followed by the total bitrate, irrespective of the mode
* -d is followed by the emphasis flag
* -c is followed by the copyright/no_copyright flag
* -o is followed by the original/not_original flag
* -e is followed by the error_protection on/off flag
* -f turns off psy model (fast mode)
* -q <i> only calculate psy model every ith frame
* -a downmix from stereo to mono
* -r turn off padding bits in frames.
* -x force byte swapping of input
* -g swap the channels on an input file
* -t talkativity. how verbose should the program be. 0 = nomessages.
*
* If the input file is in AIFF format, the sampling frequency is read
* from the AIFF header.
*
* The input and output filenames are read into #inpath# and #outpath#.
*
************************************************************************/
void parse_args (int argc, char **argv, frame_info * frame, int *psy,
unsigned long *num_samples, char inPath[MAX_NAME_SIZE],
char outPath[MAX_NAME_SIZE])
{
FLOAT srate;
int brate;
frame_header *header = frame->header;
int err = 0, i = 0;
long samplerate;
/* preset defaults */
inPath[0] = '\0';
outPath[0] = '\0';
header->lay = DFLT_LAY;
switch (DFLT_MOD) {
case 's':
header->mode = MPG_MD_STEREO;
header->mode_ext = 0;
break;
case 'd':
header->mode = MPG_MD_DUAL_CHANNEL;
header->mode_ext = 0;
break;
/* in j-stereo mode, no default header->mode_ext was defined,gave error..
now default = 2 added by MFC 14 Dec1999. */
case 'j':
header->mode = MPG_MD_JOINT_STEREO;
header->mode_ext = 2;
break;
case 'm':
header->mode = MPG_MD_MONO;
header->mode_ext = 0;
break;
default:
fprintf (stderr, "%s: Bad mode dflt %c\n", programName,DFLT_MOD);
abort ();
}
*psy = DFLT_PSY;
if ((header->sampling_frequency =
SmpFrqIndex ((long) (1000 * DFLT_SFQ),&header->version)) < 0) {
fprintf (stderr, "%s: bad sfrq default %.2f\n",programName, DFLT_SFQ);
abort ();
}
header->bitrate_index = 14;
brate = 0;
switch (DFLT_EMP) {
case 'n':
header->emphasis = 0;
break;
case '5':
header->emphasis = 1;
break;
case 'c':
header->emphasis = 3;
break;
default:
fprintf (stderr, "%s: Bad emph dflt %c\n", programName,DFLT_EMP);
abort ();
}
header->copyright = 0;
header->original = 0;
header->error_protection = FALSE;
header->dab_extension = 0;
/* process args */
while (++i < argc && err == 0) {
char c, *token, *arg, *nextArg;
int argUsed;
token = argv[i];
if (*token++ == '-') {
if (i + 1 < argc)
nextArg = argv[i + 1];
else
nextArg = "";
argUsed = 0;
if (!*token) {
/* The user wants to use stdin and/or stdout. */
if (inPath[0] == '\0')
strncpy (inPath, argv[i], MAX_NAME_SIZE);
else if (outPath[0] == '\0')
strncpy (outPath, argv[i], MAX_NAME_SIZE);
}
while ((c = *token++)) {
if (*token /* NumericQ(token) */ )
arg = token;
else
arg = nextArg;
switch (c) {
case 'm':
argUsed = 1;
if (*arg == 's') {
header->mode = MPG_MD_STEREO;
header->mode_ext = 0;
} else if (*arg == 'd') {
header->mode = MPG_MD_DUAL_CHANNEL;
header->mode_ext = 0;
} else if (*arg == 'j') {
header->mode = MPG_MD_JOINT_STEREO;
} else if (*arg == 'm') {
header->mode = MPG_MD_MONO;
header->mode_ext = 0;
} else {
fprintf (stderr, "%s: -m mode must be s/d/j/m not %s\n",
programName, arg);
err = 1;
}
break;
case 'p':
*psy = atoi (arg);
argUsed = 1;
break;
case 's':
argUsed = 1;
srate = atof (arg);
/* samplerate = rint( 1000.0 * srate ); $A */
samplerate = (long) ((1000.0 * srate) + 0.5);
if ((header->sampling_frequency =
SmpFrqIndex ((long) samplerate, &header->version))< 0)
err = 1;
break;
case 'b':
argUsed = 1;
brate = atoi (arg);
break;
case 'd':
argUsed = 1;
if (*arg == 'n')
header->emphasis = 0;
else if (*arg == '5')
header->emphasis = 1;
else if (*arg == 'c')
header->emphasis = 3;
else {
fprintf (stderr, "%s: -d emp must be n/5/c not %s\n",programName,
arg);
err = 1;
}
break;
case 'D':
argUsed = 1;
header->dab_length = atoi (arg);
header->error_protection = TRUE;
header->dab_extension = 2;
glopts.dab = TRUE;
break;
case 'c':
header->copyright = 1;
break;
case 'o':
header->original = 1;
break;
case 'e':
header->error_protection = TRUE;
break;
case 'f':
*psy = 0;
/* this switch is deprecated? FIXME get rid of glopts.usepsy
instead us psymodel 0, i.e. "-p 0" */
glopts.usepsy = FALSE;
break;
case 'r':
glopts.usepadbit = FALSE;
header->padding = 0;
break;
case 'q':
argUsed = 1;
glopts.quickmode = TRUE;
glopts.usepsy = TRUE;
glopts.quickcount = atoi (arg);
if (glopts.quickcount == 0) {
/* just don't use psy model */
glopts.usepsy = FALSE;
glopts.quickcount = FALSE;
}
break;
case 'a':
glopts.downmix = TRUE;
header->mode = MPG_MD_MONO;
header->mode_ext = 0;
break;
case 'x':
glopts.byteswap = TRUE;
break;
case 'v':
argUsed = 1;
glopts.vbr = TRUE;
glopts.vbrlevel = atof (arg);
glopts.usepadbit = FALSE;
· /* don't use padding for VBR */
header->padding = 0;
/* MFC Feb 2003: in VBR mode, joint stereo doesn't make
any sense at the moment, as there are no noisy subbands
according to bits_for_nonoise in vbr mode */
header->mode = MPG_MD_STEREO; /* force stereo mode */
header->mode_ext = 0;
break;
case 'l':
argUsed = 1;
glopts.athlevel = atof(arg);
break;
case 'h':
usage ();
break;
case 'g':
glopts.channelswap = TRUE;
break;
case 't':
argUsed = 1;
glopts.verbosity = atoi (arg);
break;
default:
fprintf (stderr, "%s: unrec option %c\n", programName, c);
err = 1;
break;
}
if (argUsed) {
if (arg == token)
token = "";
· /* no more from token */
else
++i; /* skip arg we used */
arg = "";
argUsed = 0;
}
}
} else {
if (inPath[0] == '\0')
strcpy (inPath, argv[i]);
else if (outPath[0] == '\0')
strcpy (outPath, argv[i]);
else {
fprintf (stderr, "%s: excess arg %s\n", programName, argv[i]);
err = 1;
}
}
}
if (header->dab_extension) {
/* in 48 kHz */
/* if the bit rate per channel is less then 56 kbit/s, we have 2scf-crc */
/* else we have 4 scf-crc */
/* in 24 kHz, we have 4 scf-crc, see main loop */
if (brate / (header->mode == MPG_MD_MONO ? 1 : 2) >= 56)
header->dab_extension = 4;
}
if (err || inPath[0] == '\0')
usage (); /* If no infile defined, or err has occured, then callusage() */
if (outPath[0] == '\0') {
/* replace old extension with new one, 1992-08-19, 1995-06-12 shn*/
new_ext (inPath, DFLT_EXT, outPath);
}
if (!strcmp (inPath, "-")) {
musicin = stdin; /* read from stdin */
*num_samples = MAX_U_32_NUM;
} else {
if ((musicin = fopen (inPath, "rb")) == NULL) {
fprintf (stderr, "Could not find\"%s\".\n", inPath);
exit (1);
}
parse_input_file (musicin, inPath, header, num_samples);
}
/* check for a valid bitrate */
if (brate == 0)
brate = bitrate[header->version][10];
/* Check to see we have a sane value for the bitrate for this version */
if ((header->bitrate_index = BitrateIndex (brate,header->version)) < 0)
err = 1;
/* All options are hunky dory, open the input audio file and
return to the main drag */
open_bit_stream_w (&bs, outPath, BUFFER_SIZE);
}
void smr_dump(double smr[2][SBLIMIT], int nch) {
int ch, sb;
fprintf(stdout,"SMR:");
for (ch = 0;ch<nch; ch++) {
if (ch==1)
fprintf(stdout," ");
for (sb=0;sb<SBLIMIT;sb++)
fprintf(stdout,"%3.0f ",smr[ch][sb]);
fprintf(stdout,"\n");
}
}
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include "common.h"
#include "encoder.h"
#include "musicin.h"
#include "options.h"
#include "audio_read.h"
#include "bitstream.h"
#include "mem.h"
#include "crc.h"
#include "psycho_n1.h"
#include "psycho_0.h"
#include "psycho_1.h"
#include "psycho_2.h"
#include "psycho_3.h"
#include "psycho_4.h"
#include "encode.h"
#include "availbits.h"
#include "subband.h"
#include "encode_new.h"
#include "m2aenc.h"
#include <assert.h>
FILE *musicin;
Bit_stream_struc bs;
char *programName;
char toolameversion[10] = "0.2l";
void global_init (void)
{
glopts.usepsy = TRUE;
glopts.usepadbit = TRUE;
glopts.quickmode = FALSE;
glopts.quickcount = 10;
glopts.downmix = FALSE;
glopts.byteswap = FALSE;
glopts.channelswap = FALSE;
glopts.vbr = FALSE;
glopts.vbrlevel = 0;
glopts.athlevel = 0;
glopts.verbosity = 2;
}
/************************************************************************
*
* main
*
* PURPOSE: MPEG II Encoder with
* psychoacoustic models 1 (MUSICAM) and 2 (AT&T)
*
* SEMANTICS: One overlapping frame of audio of up to 2 channels are
* processed at a time in the following order:
* (associated routines are in parentheses)
*
* 1. Filter sliding window of data to get 32 subband
* samples per channel.
* (window_subband,filter_subband)
*
* 2. If joint stereo mode, combine left and right channels
* for subbands above #jsbound#.
* (combine_LR)
*
* 3. Calculate scalefactors for the frame, and
* also calculate scalefactor select information.
* (*_scale_factor_calc)
*
* 4. Calculate psychoacoustic masking levels using selected
* psychoacoustic model.
* (psycho_i, psycho_ii)
*
* 5. Perform iterative bit allocation for subbands with low
* mask_to_noise ratios using masking levels from step 4.
* (*_main_bit_allocation)
*
* 6. If error protection flag is active, add redundancy for
* error protection.
* (*_CRC_calc)
*
* 7. Pack bit allocation, scalefactors, and scalefactor select
*headerrmation onto bitstream.
* (*_encode_bit_alloc,*_encode_scale,transmission_pattern)
*
* 8. Quantize subbands and pack them into bitstream
* (*_subband_quantization, *_sample_encoding)
*
************************************************************************/
int frameNum = 0;
int main (int argc, char **argv)
{
typedef double SBS[2][3][SCALE_BLOCK][SBLIMIT];
SBS *sb_sample;
typedef double JSBS[3][SCALE_BLOCK][SBLIMIT];
JSBS *j_sample;
typedef double IN[2][HAN_SIZE];
IN *win_que;
typedef unsigned int SUB[2][3][SCALE_BLOCK][SBLIMIT];
SUB *subband;
frame_info frame;
frame_header header;
char original_file_name[MAX_NAME_SIZE];
char encoded_file_name[MAX_NAME_SIZE];
short **win_buf;
static short buffer[2][1152];
static unsigned int bit_alloc[2][SBLIMIT], scfsi[2][SBLIMIT];
static unsigned int scalar[2][3][SBLIMIT], j_scale[3][SBLIMIT];
static double smr[2][SBLIMIT], lgmin[2][SBLIMIT], max_sc[2][SBLIMIT];
// FLOAT snr32[32];
short sam[2][1344]; /* was [1056]; */
int model, nch, error_protection;
static unsigned int crc;
int sb, ch, adb;
unsigned long frameBits, sentBits = 0;
unsigned long num_samples;
int lg_frame;
int i;
/* Used to keep the SNR values for the fast/quick psy models */
static FLOAT smrdef[2][32];
static int psycount = 0;
extern int minimum;
time_t start_time, end_time;
int total_time;
C_TRACE = fopen("C_trace.txt", "w");
sb_sample = (SBS *) mem_alloc (sizeof (SBS), "sb_sample");
j_sample = (JSBS *) mem_alloc (sizeof (JSBS), "j_sample");
win_que = (IN *) mem_alloc (sizeof (IN), "Win_que");
subband = (SUB *) mem_alloc (sizeof (SUB), "subband");
win_buf = (short **) mem_alloc (sizeof (short *) * 2, "win_buf");
/* clear buffers */
memset ((char *) buffer, 0, sizeof (buffer));
memset ((char *) bit_alloc, 0, sizeof (bit_alloc));
memset ((char *) scalar, 0, sizeof (scalar));
memset ((char *) j_scale, 0, sizeof (j_scale));
memset ((char *) scfsi, 0, sizeof (scfsi));
memset ((char *) smr, 0, sizeof (smr));
memset ((char *) lgmin, 0, sizeof (lgmin));
memset ((char *) max_sc, 0, sizeof (max_sc));
//memset ((char *) snr32, 0, sizeof (snr32));
memset ((char *) sam, 0, sizeof (sam));
global_init ();
header.extension = 0;
frame.header = &header;
frame.tab_num = -1; /* no table loaded */
frame.alloc = NULL;
header.version = MPEG_AUDIO_ID; /* Default: MPEG-1 */
total_time = 0;
time(&start_time);
programName = argv[0];
if (argc == 1) /* no command-line args */
short_usage ();
else
parse_args (argc, argv, &frame, &model, &num_samples,original_file_name,
encoded_file_name);
print_config (&frame, &model, original_file_name,encoded_file_name);
/* this will load the alloc tables and do some other stuff */
hdr_to_frps (&frame);
nch = frame.nch;
error_protection = header.error_protection;
while (get_audio (musicin, buffer, num_samples, nch, &header) >0) {
if (glopts.verbosity > 1)
if (++frameNum % 10 == 0)
fprintf (stderr, "[%4u]\r", frameNum);
fflush (stderr);
win_buf[0] = &buffer[0][0];
win_buf[1] = &buffer[1][0];
adb = available_bits (&header, &glopts); //
#if CTRACE
if (frameNum == 1)
fprintf(C_TRACE, "avilibable bits for No.%d:%d\n", frameNum,adb);
fprintf(C_TRACE, "\n");
#endif
lg_frame = adb / 8;
if (header.dab_extension) {
/* in 24 kHz we always have 4 bytes */
if (header.sampling_frequency == 1)
header.dab_extension = 4;
/* You must have one frame in memory if you are in DAB mode */
/* in conformity of the norme ETS 300 401 http://www.etsi.org */
/* see bitstream.c */
if (frameNum == 1)
minimum = lg_frame + MINIMUM;
adb -= header.dab_extension * 8 + header.dab_length * 8 +16;
}
{
int gr, bl, ch;
/* New polyphase filter
Combines windowing and filtering. Ricardo Feb'03 */
for( gr = 0; gr < 3; gr++ )
for ( bl = 0; bl < 12; bl++ )
for ( ch = 0; ch < nch; ch++ )
WindowFilterSubband( &buffer[ch][gr * 12 * 32 + 32 * bl], ch,
//
&(*sb_sample)[ch][gr][bl][0] );
}
#ifdef REFERENCECODE
{
/* Old code. left here for reference */
int gr, bl, ch;
for (gr = 0; gr < 3; gr++)
for (bl = 0; bl < SCALE_BLOCK; bl++)
for (ch = 0; ch < nch; ch++) {
window_subband (&win_buf[ch], &(*win_que)[ch][0], ch);
filter_subband (&(*win_que)[ch][0],&(*sb_sample)[ch][gr][bl][0]);
}
}
#endif
#ifdef NEWENCODE
scalefactor_calc_new(*sb_sample, scalar, nch, frame.sblimit);
find_sf_max (scalar, &frame, max_sc);
if (frame.actual_mode == MPG_MD_JOINT_STEREO) {
/* this way we calculate more mono than we need */
/* but it is cheap */
combine_LR_new (*sb_sample, *j_sample, frame.sblimit);
scalefactor_calc_new (j_sample, &j_scale, 1,frame.sblimit);
}
#else
scale_factor_calc (*sb_sample, scalar, nch, frame.sblimit);
//
pick_scale (scalar, &frame, max_sc);
if (frame.actual_mode == MPG_MD_JOINT_STEREO) {
/* this way we calculate more mono than we need */
/* but it is cheap */
combine_LR (*sb_sample, *j_sample, frame.sblimit);
scale_factor_calc (j_sample, &j_scale, 1,frame.sblimit);
}
#endif
if ((glopts.quickmode == TRUE) && (++psycount %glopts.quickcount != 0)) {
/* We're using quick mode, so we're only calculating themodel every
'quickcount' frames. Otherwise, just copy theold ones across */
for (ch = 0; ch < nch; ch++) {
for (sb = 0; sb < SBLIMIT; sb++)
smr[ch][sb] = smrdef[ch][sb];
}
} else {
/* calculate the psymodel */
switch (model) {
case -1:
psycho_n1 (smr, nch);
break;
case 0: /* Psy Model A */
psycho_0 (smr, nch, scalar, (FLOAT) s_freq[header.version][header.sampling_frequency]* 1000);
break;
case 1:
psycho_1 (buffer, max_sc, smr, &frame);
break;
case 2:
for (ch = 0; ch < nch; ch++) {
psycho_2 (&buffer[ch][0], &sam[ch][0], ch, &smr[ch][0],//snr32,
(FLOAT) s_freq[header.version][header.sampling_frequency] *
1000, &glopts);
}
break;
case 3:
/* Modified psy model 1 */
psycho_3 (buffer, max_sc, smr, &frame, &glopts);
break;
case 4:
/* Modified Psycho Model 2 */
for (ch = 0; ch < nch; ch++) {
psycho_4 (&buffer[ch][0], &sam[ch][0], ch, &smr[ch][0], //snr32,
(FLOAT) s_freq[header.version][header.sampling_frequency] *
1000, &glopts);
}
break;
case 5:
/* Model 5 comparse model 1 and 3 */
psycho_1 (buffer, max_sc, smr, &frame);
fprintf(stdout,"1 ");
smr_dump(smr,nch);
psycho_3 (buffer, max_sc, smr, &frame, &glopts);
fprintf(stdout,"3 ");
smr_dump(smr,nch);
break;
case 6:
/* Model 6 compares model 2 and 4 */
for (ch = 0; ch < nch; ch++)
psycho_2 (&buffer[ch][0], &sam[ch][0], ch, &smr[ch][0],//snr32,
(FLOAT) s_freq[header.version][header.sampling_frequency] *
1000, &glopts);
fprintf(stdout,"2 ");
smr_dump(smr,nch);
for (ch = 0; ch < nch; ch++)
psycho_4 (&buffer[ch][0], &sam[ch][0], ch, &smr[ch][0], //snr32,
(FLOAT) s_freq[header.version][header.sampling_frequency] *
1000, &glopts);
fprintf(stdout,"4 ");
smr_dump(smr,nch);
break;
case 7:
fprintf(stdout,"Frame: %i\n",frameNum);
/* Dump the SMRs for all models */
psycho_1 (buffer, max_sc, smr, &frame);
fprintf(stdout,"1");
smr_dump(smr, nch);
psycho_3 (buffer, max_sc, smr, &frame, &glopts);
fprintf(stdout,"3");
smr_dump(smr,nch);
for (ch = 0; ch < nch; ch++)
psycho_2 (&buffer[ch][0], &sam[ch][0], ch, &smr[ch][0],//snr32,
(FLOAT) s_freq[header.version][header.sampling_frequency] *
1000, &glopts);
fprintf(stdout,"2");
smr_dump(smr,nch);
for (ch = 0; ch < nch; ch++)
psycho_4 (&buffer[ch][0], &sam[ch][0], ch, &smr[ch][0], //snr32,
(FLOAT) s_freq[header.version][header.sampling_frequency] *
1000, &glopts);
fprintf(stdout,"4");
smr_dump(smr,nch);
break;
case 8:
/* Compare 0 and 4 */
psycho_n1 (smr, nch);
fprintf(stdout,"0");
smr_dump(smr,nch);
for (ch = 0; ch < nch; ch++)
psycho_4 (&buffer[ch][0], &sam[ch][0], ch, &smr[ch][0], //snr32,
(FLOAT) s_freq[header.version][header.sampling_frequency] *
1000, &glopts);
fprintf(stdout,"4");
smr_dump(smr,nch);
break;
default:
fprintf (stderr, "Invalid psy model specification: %i\n", model);
exit (0);
}
if (glopts.quickmode == TRUE)
/* copy the smr values and reuse them later */
for (ch = 0; ch < nch; ch++) {
for (sb = 0; sb < SBLIMIT; sb++)
smrdef[ch][sb] = smr[ch][sb];
}
if (glopts.verbosity > 4)
smr_dump(smr, nch);
}
#ifdef NEWENCODE
sf_transmission_pattern (scalar, scfsi, &frame);
main_bit_allocation_new (smr, scfsi, bit_alloc, &adb,&frame, &glopts);
//main_bit_allocation (smr, scfsi, bit_alloc, &adb,&frame, &glopts);
if (error_protection)
CRC_calc (&frame, bit_alloc, scfsi, &crc);
write_header (&frame, &bs);
//encode_info (&frame, &bs);
if (error_protection)
putbits (&bs, crc, 16);
write_bit_alloc (bit_alloc, &frame, &bs);
//encode_bit_alloc (bit_alloc, &frame, &bs);
write_scalefactors(bit_alloc, scfsi, scalar, &frame,&bs);
//encode_scale (bit_alloc, scfsi, scalar, &frame, &bs);
subband_quantization_new (scalar, *sb_sample, j_scale, *j_sample,bit_alloc,
*subband, &frame);
//subband_quantization (scalar, *sb_sample, j_scale, *j_sample,bit_alloc,
// *subband, &frame);
write_samples_new(*subband, bit_alloc, &frame, &bs);
//sample_encoding (*subband, bit_alloc, &frame, &bs);
#else
transmission_pattern (scalar, scfsi, &frame);
main_bit_allocation (smr, scfsi, bit_alloc, &adb, &frame,&glopts);
if (error_protection)
CRC_calc (&frame, bit_alloc, scfsi, &crc);
encode_info (&frame, &bs);
if (error_protection)
encode_CRC (crc, &bs);
encode_bit_alloc (bit_alloc, &frame, &bs);
#if CTRACE
if (frameNum == 1)
{
fprintf(C_TRACE, "下面输出比特分配：\n");
for (int i = 0; i < frame.sblimit; i++)
fprintf(C_TRACE, "ch[0].subband[%d]: %d bits\n",i,bit_alloc[0][i]);
//putbits(bs, bit_alloc[k][i], (*alloc)[i][0].bits);
fprintf(C_TRACE, "\n");
}
#endif
encode_scale (bit_alloc, scfsi, scalar, &frame, &bs);
#if CTRACE
if (frameNum == 1)
{
fprintf(C_TRACE, "下面输出比例因子选择：\n");
for (int i = 0; i < frame.sblimit; i++)
fprintf(C_TRACE, "Ch[0].subband[%d] scfsi: %d\n",i,scfsi[0][i]);
fprintf(C_TRACE, "\n");
}
#endif
#if CTRACE
if (frameNum == 1)
{
fprintf(C_TRACE, "下面输出比例因子：\n");
for (int i = 0; i < frame.sblimit; i++)
{
fprintf(C_TRACE, "Ch[0].subband[%d] scalar: %d\t %d\t %d\n", i,scalar[0][0][i], scalar[0][1][i], scalar[0][2][i]);
}
fprintf(C_TRACE, "\n");
}
#endif
subband_quantization (scalar, *sb_sample, j_scale, *j_sample,bit_alloc,
*subband, &frame);
sample_encoding (*subband, bit_alloc, &frame, &bs);
#endif
/* If not all the bits were used, write out a stack of zeros */
for (i = 0; i < adb; i++)
put1bit (&bs, 0);
if (header.dab_extension) {
/* Reserve some bytes for X-PAD in DAB mode */
putbits (&bs, 0, header.dab_length * 8);
for (i = header.dab_extension - 1; i >= 0; i--) {
CRC_calcDAB (&frame, bit_alloc, scfsi, scalar, &crc, i);
/* this crc is for the previous frame in DAB mode */
if (bs.buf_byte_idx + lg_frame < bs.buf_size)
bs.buf[bs.buf_byte_idx + lg_frame] = crc;
/* reserved 2 bytes for F-PAD in DAB mode */
putbits (&bs, crc, 8);
}
putbits (&bs, 0, 16);
}
frameBits = sstell (&bs) - sentBits;
if (frameBits % 8) { /* a program failure */
fprintf (stderr, "Sent %ld bits = %ld slots plus%ld\n", frameBits,
frameBits / 8, frameBits % 8);
fprintf (stderr, "If you are reading this, theprogram is broken\n");
fprintf (stderr, "email [mfc at NOTplanckenerg.com]without the NOT\n");
fprintf (stderr, "with the command line arguments andother info\n");
exit (0);
}
sentBits += frameBits;
}
close_bit_stream_w (&bs);
if ((glopts.verbosity > 1) && (glopts.vbr == TRUE)) {
int i;
#ifdef NEWENCODE
extern int vbrstats_new[15];
#else
extern int vbrstats[15];
#endif
fprintf (stdout, "VBR stats:\n");
for (i = 1; i < 15; i++)
fprintf (stdout, "%4i ",bitrate[header.version][i]);
fprintf (stdout, "\n");
for (i = 1; i < 15; i++)
#ifdef NEWENCODE
fprintf (stdout,"%4i ",vbrstats_new[i]);
#else
fprintf (stdout, "%4i ", vbrstats[i]);
#endif
fprintf (stdout, "\n");
}
fprintf (stderr,
"Avg slots/frame = %.3f; b/smp = %.2f; bitrate = %.3f kbps\n",
(FLOAT) sentBits / (frameNum * 8),
(FLOAT) sentBits / (frameNum * 1152),
(FLOAT) sentBits / (frameNum * 1152) *
s_freq[header.version][header.sampling_frequency]);
if (fclose (musicin) != 0) {
fprintf (stderr, "Could not close \"%s\".\n",original_file_name);
exit (2);
}
fprintf (stderr, "\nDone\n");
time(&end_time);
total_time = end_time - start_time;
printf("total time is %d\n", total_time);
exit (0);
}
/************************************************************************
*
* print_config
*
* PURPOSE: Prints the encoding parameters used
*
************************************************************************/
void print_config (frame_info * frame, int *psy, char *inPath,
char *outPath)
{
frame_header *header = frame->header;
if (glopts.verbosity == 0)
return;
fprintf (stderr,"--------------------------------------------\n");
fprintf (stderr, "Input File : '%s' %.1f kHz\n",
(strcmp (inPath, "-") ? inPath : "stdin"),
s_freq[header->version][header->sampling_frequency]);
fprintf (stderr, "Output File: '%s'\n",
(strcmp (outPath, "-") ? outPath : "stdout"));
fprintf (stderr, "%d kbps ",bitrate[header->version][header->bitrate_index]);
fprintf (stderr, "%s ", version_names[header->version]);
if (header->mode != MPG_MD_JOINT_STEREO)
fprintf (stderr, "Layer II %s Psycho model=%d (Mode_Extension=%d)\n",
mode_names[header->mode], *psy, header->mode_ext);
else
fprintf (stderr, "Layer II %s Psy model %d \n",mode_names[header->mode],
*psy);
fprintf (stderr,"[De-emph:%s\tCopyright:%s\tOriginal:%s\tCRC:%s]\n",
((header->emphasis) ? "On" : "Off"),
((header->copyright) ? "Yes" : "No"),
((header->original) ? "Yes" : "No"),
((header->error_protection) ? "On" : "Off"));
fprintf (stderr,"[Padding:%s\tByte-swap:%s\tChanswap:%s\tDAB:%s]\n",
((glopts.usepadbit) ? "Normal" : "Off"),
((glopts.byteswap) ? "On" : "Off"),
((glopts.channelswap) ? "On" : "Off"),
((glopts.dab) ? "On" : "Off"));
if (glopts.vbr == TRUE)
fprintf (stderr, "VBR Enabled. Using MNR boost of%f\n", glopts.vbrlevel);
fprintf(stderr,"ATH adjustment %f\n",glopts.athlevel);
fprintf (stderr,"--------------------------------------------\n");
}
/************************************************************************
*
* usage
*
* PURPOSE: Writes command line syntax to the file specified by #stderr#
*
************************************************************************/
void usage (void)
{ /* print syntax & exit */
/* FIXME: maybe have an option to display better definitions of helpcodes, and
long equivalents of the flags */
fprintf (stdout, "\ntooLAME version %s(http://toolame.sourceforge.net)\n",
toolameversion);
fprintf (stdout, "MPEG Audio Layer II encoder\n\n");
fprintf (stdout, "usage: \n");
fprintf (stdout, "\t%s [options] <input><output>\n\n", programName);
fprintf (stdout, "Options:\n");
fprintf (stdout, "Input\n");
fprintf (stdout, "\t-s sfrq input smpl rate in kHz (dflt %4.1f)\n",
DFLT_SFQ);
fprintf (stdout, "\t-a downmix from stereo tomono\n");
fprintf (stdout, "\t-x force byte-swapping ofinput\n");
fprintf (stdout, "\t-g swap channels of inputfile\n");
fprintf (stdout, "Output\n");
fprintf (stdout, "\t-m mode channel mode : s/d/j/m (dflt %4c)\n",
DFLT_MOD);
fprintf (stdout, "\t-p psy psychoacoustic model 0/1/2/3(dflt %4u)\n",
DFLT_PSY);
fprintf (stdout, "\t-b br total bitrate in kbps (dflt 192)\n");
fprintf (stdout, "\t-v lev vbr mode\n");
fprintf (stdout, "\t-l lev ATH level (dflt 0)\n");
fprintf (stdout, "Operation\n");
// fprintf (stdout, "\t-f fast mode (turns offpsy model)\n");
// deprecate the -f switch. use "-p 0" instead.
fprintf (stdout,
"\t-q num quick mode. only calculate psy model every numframes\n");
fprintf (stdout, "Misc\n");
fprintf (stdout, "\t-d emp de-emphasis n/5/c (dflt %4c)\n",
DFLT_EMP);
fprintf (stdout, "\t-c mark ascopyright\n");
fprintf (stdout, "\t-o mark asoriginal\n");
fprintf (stdout, "\t-e add errorprotection\n");
fprintf (stdout, "\t-r force padding bit/frameoff\n");
fprintf (stdout, "\t-D len add DAB extensions of length[len]\n");
fprintf (stdout, "\t-t talkativity 0=nomessages (dflt 2)");
fprintf (stdout, "Files\n");
fprintf (stdout,
"\tinput input sound file. (WAV,AIFF,PCM or use'/dev/stdin')\n");
fprintf (stdout, "\toutput output bit stream of encodedaudio\n");
fprintf (stdout,
"\n\tAllowable bitrates for 16, 22.05 and 24kHz sampleinput\n");
fprintf (stdout,
"\t8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144,160\n");
fprintf (stdout,
"\n\tAllowable bitrates for 32, 44.1 and 48kHz sampleinput\n");
fprintf (stdout,
"\t32, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320,384\n");
exit (1);
}
/*********************************************
* void short_usage(void)
********************************************/
void short_usage (void)
{
/* print a bit of info about the program */
fprintf (stderr, "tooLAME version %s\n(http://toolame.sourceforge.net)\n",
toolameversion);
fprintf (stderr, "MPEG Audio Layer II encoder\n\n");
fprintf (stderr, "USAGE: %s [options] <infile>[outfile]\n\n", programName);
fprintf (stderr, "Try \"%s -h\" for moreinformation.\n", programName);
exit (0);
}
/*********************************************
* void proginfo(void)
********************************************/
void proginfo (void)
{
/* print a bit of info about the program */
fprintf (stderr,
"\ntooLAME version 0.2g (http://toolame.sourceforge.net)\n");
fprintf (stderr, "MPEG Audio Layer II encoder\n\n");
}
/************************************************************************
*
* parse_args
*
* PURPOSE: Sets encoding parameters to the specifications of the
* command line. Default settings are used for parameters
* not specified in the command line.
*
* SEMANTICS: The command line is parsed according to the following
* syntax:
*
* -m is followed by the mode
* -p is followed by the psychoacoustic model number
* -s is followed by the sampling rate
* -b is followed by the total bitrate, irrespective of the mode
* -d is followed by the emphasis flag
* -c is followed by the copyright/no_copyright flag
* -o is followed by the original/not_original flag
* -e is followed by the error_protection on/off flag
* -f turns off psy model (fast mode)
* -q <i> only calculate psy model every ith frame
* -a downmix from stereo to mono
* -r turn off padding bits in frames.
* -x force byte swapping of input
* -g swap the channels on an input file
* -t talkativity. how verbose should the program be. 0 = no messages.
*
* If the input file is in AIFF format, the sampling frequency is read
* from the AIFF header.
*
* The input and output filenames are read into #inpath# and #outpath#.
*
************************************************************************/
void parse_args (int argc, char **argv, frame_info * frame, int *psy,
unsigned long *num_samples, char inPath[MAX_NAME_SIZE],
char outPath[MAX_NAME_SIZE])
{
FLOAT srate;
int brate;
frame_header *header = frame->header;
int err = 0, i = 0;
long samplerate;
/* preset defaults */
inPath[0] = '\0';
outPath[0] = '\0';
header->lay = DFLT_LAY;
switch (DFLT_MOD) {
case 's':
header->mode = MPG_MD_STEREO;
header->mode_ext = 0;
break;
case 'd':
header->mode = MPG_MD_DUAL_CHANNEL;
header->mode_ext = 0;
break;
/* in j-stereo mode, no default header->mode_ext was defined,gave error..
now default = 2 added by MFC 14 Dec1999. */
case 'j':
header->mode = MPG_MD_JOINT_STEREO;
header->mode_ext = 2;
break;
case 'm':
header->mode = MPG_MD_MONO;
header->mode_ext = 0;
break;
default:
fprintf (stderr, "%s: Bad mode dflt %c\n", programName,DFLT_MOD);
abort ();
}
*psy = DFLT_PSY;
if ((header->sampling_frequency =
SmpFrqIndex ((long) (1000 * DFLT_SFQ),&header->version)) < 0) {
fprintf (stderr, "%s: bad sfrq default %.2f\n",programName, DFLT_SFQ);
abort ();
}
header->bitrate_index = 14;
brate = 0;
switch (DFLT_EMP) {
case 'n':
header->emphasis = 0;
break;
case '5':
header->emphasis = 1;
break;
case 'c':
header->emphasis = 3;
break;
default:
fprintf (stderr, "%s: Bad emph dflt %c\n", programName,DFLT_EMP);
abort ();
}
header->copyright = 0;
header->original = 0;
header->error_protection = FALSE;
header->dab_extension = 0;
/* process args */
while (++i < argc && err == 0) {
char c, *token, *arg, *nextArg;
int argUsed;
token = argv[i];
if (*token++ == '-') {
if (i + 1 < argc)
nextArg = argv[i + 1];
else
nextArg = "";
argUsed = 0;
if (!*token) {
/* The user wants to use stdin and/or stdout. */
if (inPath[0] == '\0')
strncpy (inPath, argv[i], MAX_NAME_SIZE);
else if (outPath[0] == '\0')
strncpy (outPath, argv[i], MAX_NAME_SIZE);
}
while ((c = *token++)) {
if (*token /* NumericQ(token) */ )
arg = token;
else
arg = nextArg;
switch (c) {
case 'm':
argUsed = 1;
if (*arg == 's') {
header->mode = MPG_MD_STEREO;
header->mode_ext = 0;
} else if (*arg == 'd') {
header->mode = MPG_MD_DUAL_CHANNEL;
header->mode_ext = 0;
} else if (*arg == 'j') {
header->mode = MPG_MD_JOINT_STEREO;
} else if (*arg == 'm') {
header->mode = MPG_MD_MONO;
header->mode_ext = 0;
} else {
fprintf (stderr, "%s: -m mode must be s/d/j/m not %s\n",
programName, arg);
err = 1;
}
break;
case 'p':
*psy = atoi (arg);
argUsed = 1;
break;
case 's':
argUsed = 1;
srate = atof (arg);
/* samplerate = rint( 1000.0 * srate ); $A */
samplerate = (long) ((1000.0 * srate) + 0.5);
if ((header->sampling_frequency =
SmpFrqIndex ((long) samplerate, &header->version))< 0)
err = 1;
break;
case 'b':
argUsed = 1;
brate = atoi (arg);
break;
case 'd':
argUsed = 1;
if (*arg == 'n')
header->emphasis = 0;
else if (*arg == '5')
header->emphasis = 1;
else if (*arg == 'c')
header->emphasis = 3;
else {
fprintf (stderr, "%s: -d emp must be n/5/c not %s\n",programName,
arg);
err = 1;
}
break;
case 'D':
argUsed = 1;
header->dab_length = atoi (arg);
header->error_protection = TRUE;
header->dab_extension = 2;
glopts.dab = TRUE;
break;
case 'c':
header->copyright = 1;
break;
case 'o':
header->original = 1;
break;
case 'e':
header->error_protection = TRUE;
break;
case 'f':
*psy = 0;
/* this switch is deprecated? FIXME get rid of glopts.usepsy
instead us psymodel 0, i.e. "-p 0" */
glopts.usepsy = FALSE;
break;
case 'r':
glopts.usepadbit = FALSE;
header->padding = 0;
break;
case 'q':
argUsed = 1;
glopts.quickmode = TRUE;
glopts.usepsy = TRUE;
glopts.quickcount = atoi (arg);
if (glopts.quickcount == 0) {
/* just don't use psy model */
glopts.usepsy = FALSE;
glopts.quickcount = FALSE;
}
break;
case 'a':
glopts.downmix = TRUE;
header->mode = MPG_MD_MONO;
header->mode_ext = 0;
break;
case 'x':
glopts.byteswap = TRUE;
break;
case 'v':
argUsed = 1;
glopts.vbr = TRUE;
glopts.vbrlevel = atof (arg);
glopts.usepadbit = FALSE;
/* don't use padding for VBR */
header->padding = 0;
/* MFC Feb 2003: in VBR mode, joint stereo doesn't make
any sense at the moment, as there are no noisy subbands
according to bits_for_nonoise in vbr mode */
header->mode = MPG_MD_STEREO; /* force stereo mode */
header->mode_ext = 0;
break;
case 'l':
argUsed = 1;
glopts.athlevel = atof(arg);
break;
case 'h':
usage ();
break;
case 'g':
glopts.channelswap = TRUE;
break;
case 't':
argUsed = 1;
glopts.verbosity = atoi (arg);
break;
default:
fprintf (stderr, "%s: unrec option %c\n", programName, c);
err = 1;
break;
}
if (argUsed) {
if (arg == token)
token = "";
/* no more from token */
else
++i; /* skip arg we used */
arg = "";
argUsed = 0;
}
}
} else {
if (inPath[0] == '\0')
strcpy (inPath, argv[i]);
else if (outPath[0] == '\0')
strcpy (outPath, argv[i]);
else {
fprintf (stderr, "%s: excess arg %s\n", programName, argv[i]);
err = 1;
}
}
}
if (header->dab_extension) {
/* in 48 kHz */
/* if the bit rate per channel is less then 56 kbit/s, we have 2scf-crc */
/* else we have 4 scf-crc */
/* in 24 kHz, we have 4 scf-crc, see main loop */
if (brate / (header->mode == MPG_MD_MONO ? 1 : 2) >= 56)
header->dab_extension = 4;
}
if (err || inPath[0] == '\0')
usage (); /* If no infile defined, or err has occured, then callusage() */
if (outPath[0] == '\0') {
/* replace old extension with new one, 1992-08-19, 1995-06-12 shn*/
new_ext (inPath, DFLT_EXT, outPath);
}
if (!strcmp (inPath, "-")) {
musicin = stdin; /* read from stdin */
*num_samples = MAX_U_32_NUM;
} else {
if ((musicin = fopen (inPath, "rb")) == NULL) {
fprintf (stderr, "Could not find\"%s\".\n", inPath);
exit (1);
}
parse_input_file (musicin, inPath, header, num_samples);
}
/* check for a valid bitrate */
if (brate == 0)
brate = bitrate[header->version][10];
/* Check to see we have a sane value for the bitrate for this version */
if ((header->bitrate_index = BitrateIndex (brate,header->version)) < 0)
err = 1;
/* All options are hunky dory, open the input audio file and
return to the main drag */
open_bit_stream_w (&bs, outPath, BUFFER_SIZE);
}
void smr_dump(double smr[2][SBLIMIT], int nch) {
int ch, sb;
fprintf(stdout,"SMR:");
for (ch = 0;ch<nch; ch++) {
if (ch==1)
fprintf(stdout," ");
for (sb=0;sb<SBLIMIT;sb++)
fprintf(stdout,"%3.0f ",smr[ch][sb]);
fprintf(stdout,"\n");
}
}
下面输出比特分配：
ch[0].subband[0]: 8 bits
ch[0].subband[1]: 8 bits
ch[0].subband[2]: 6 bits
ch[0].subband[3]: 8 bits
ch[0].subband[4]: 7 bits
ch[0].subband[5]: 8 bits
ch[0].subband[6]: 8 bits
ch[0].subband[7]: 6 bits
ch[0].subband[8]: 5 bits
ch[0].subband[9]: 6 bits
ch[0].subband[10]: 6 bits
ch[0].subband[11]: 7 bits
ch[0].subband[12]: 6 bits
ch[0].subband[13]: 6 bits
ch[0].subband[14]: 6 bits
ch[0].subband[15]: 5 bits
ch[0].subband[16]: 5 bits
ch[0].subband[17]: 5 bits
ch[0].subband[18]: 4 bits
ch[0].subband[19]: 6 bits
ch[0].subband[20]: 3 bits
ch[0].subband[21]: 3 bits
ch[0].subband[22]: 0 bits
ch[0].subband[23]: 0 bits
ch[0].subband[24]: 0 bits
ch[0].subband[25]: 0 bits
ch[0].subband[26]: 0 bits
ch[0].subband[27]: 0 bits
ch[0].subband[28]: 0 bits
ch[0].subband[29]: 0 bits
下面输出比例因子选择：
Ch[0].subband[0] scfsi: 2
Ch[0].subband[1] scfsi: 2
Ch[0].subband[2] scfsi: 3
Ch[0].subband[3] scfsi: 2
Ch[0].subband[4] scfsi: 2
Ch[0].subband[5] scfsi: 0
Ch[0].subband[6] scfsi: 2
Ch[0].subband[7] scfsi: 2
Ch[0].subband[8] scfsi: 3
Ch[0].subband[9] scfsi: 3
Ch[0].subband[10] scfsi: 2
Ch[0].subband[11] scfsi: 1
Ch[0].subband[12] scfsi: 3
Ch[0].subband[13] scfsi: 2
Ch[0].subband[14] scfsi: 0
Ch[0].subband[15] scfsi: 3
Ch[0].subband[16] scfsi: 2
Ch[0].subband[17] scfsi: 2
Ch[0].subband[18] scfsi: 1
Ch[0].subband[19] scfsi: 2
Ch[0].subband[20] scfsi: 1
Ch[0].subband[21] scfsi: 3
Ch[0].subband[22] scfsi: 2
Ch[0].subband[23] scfsi: 3
Ch[0].subband[24] scfsi: 0
Ch[0].subband[25] scfsi: 3
Ch[0].subband[26] scfsi: 3
Ch[0].subband[27] scfsi: 3
Ch[0].subband[28] scfsi: 3
Ch[0].subband[29] scfsi: 3
下面输出比例因子：
Ch[0].subband[0] scalar: 11 11
11
Ch[0].subband[1] scalar: 12 12
12
Ch[0].subband[2] scalar: 21 18
18
Ch[0].subband[3] scalar: 25 25
25
Ch[0].subband[4] scalar: 29 29
29
Ch[0].subband[5] scalar: 28 23
26
Ch[0].subband[6] scalar: 22 22
22
Ch[0].subband[7] scalar: 21 21
21
Ch[0].subband[8] scalar: 32 28
28
Ch[0].subband[9] scalar: 34 30
30
Ch[0].subband[10] scalar: 31 31
31
Ch[0].subband[11] scalar: 30 30
26
Ch[0].subband[12] scalar: 27 24
24
Ch[0].subband[13] scalar: 23 23
23
Ch[0].subband[14] scalar: 26 22
25
Ch[0].subband[15] scalar: 30 25
25
Ch[0].subband[16] scalar: 26 26
26
Ch[0].subband[17] scalar: 29 29
29
Ch[0].subband[18] scalar: 31 31
30
Ch[0].subband[19] scalar: 26 26
26
Ch[0].subband[20] scalar: 34 34
31
Ch[0].subband[21] scalar: 34 31
31
Ch[0].subband[22] scalar: 38 38
38
Ch[0].subband[23] scalar: 39 50
50
Ch[0].subband[24] scalar: 43 51
57
Ch[0].subband[25] scalar: 41 54
54
Ch[0].subband[26] scalar: 45 52
52
Ch[0].subband[27] scalar: 42 54
54
Ch[0].subband[28] scalar: 44 52
52
Ch[0].subband[29] scalar: 43 52
52
774
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
