使用NX nomachine 连接图形化界面安装oracle

服务端：CentOS 6.0
        所需包 ：安装按顺序
64位下载地址
http://www.nomachine.com/download-package.php?Prod_Id=3596
①nxclient-3.5.0-7.x86_64.rpm
②nxnode-3.5.0-7.x86_64.rpm
③nxserver-3.5.0-9.x86_64.rpm
客户端：Windows 7
        所需包：nxclient-3.5.0-7.exe
 
配置过程：
Server端：
1、安装上述所写三个包，注意顺序
# vi /usr/NX/etc/server.cfg
取消如下注释，并修改为
第102行 EnableAutokillSessions = "1"   指：允许自动断开
第156行 EnableUnencryptedSession = "0"  指：加密传输
 
2、# vi /etc/ssh/sshd_config
最后添加：
AuthorizedKeysFile /usr/NX/home/nx/.ssh/authorized_keys2
这是密钥路径
# /etc/init.d/sshd restart
3、添加连接用户（最好是系统不存在的，如果之前已经存在可以不用添加，直接连）
# /usr/NX/bin/nxserver --useradd 用户 --system
连续两次输入密码
NX> 102 Password:
NX> 102 Confirm password:
NX> 900 Setting password for user: ecdata.
NX> 137 System password changed correctly.
NX> 304 User: ecdata added to the system.
NX> 801 User: ecdata uses SSHD authentication.
NX> 301 User: ecdata enabled in the NX user DB.
NX> 999 Bye.
 
 
# /usr/NX/bin/nxserver –restart重启
# /usr/NX/bin/nxserver –help 查看更多帮助
 

1、下载安装后之后，检查结果如下

[root@node1 softbak]# rpm -aq|grep nx
nxclient-3.5.0-7.x86_64
nxserver-3.5.0-11.x86_64
nxnode-3.5.0-9.x86_64
[root@node1 softbak]#

重启NX server服务

[root@node1 softbak]# /usr/NX/bin/nxserver --restart
NX> 123 Service stopped.
NX> 153 Stopping NX server monitor.
NX> 153 NX server monitor already stopped.
NX> 900 Terminating session id: F9C15B5348402357365B72A6E372D1CA for user: oracle
NX> 900 Terminating session id: 27D0D1088B99788CAEB3CB97EDB40882 for user: grid
NX> 900 Still waiting for session id: F9C15B5348402357365B72A6E372D1CA for user: oracle to terminate.
NX> 900 Still waiting for session id: 27D0D1088B99788CAEB3CB97EDB40882 for user: grid to terminate.
NX> 900 Session id: F9C15B5348402357365B72A6E372D1CA terminated.
NX> 900 Session id: 27D0D1088B99788CAEB3CB97EDB40882 terminated.
NX> 122 Service started.
NX> 999 Bye.

2、检查NX服务有没有启动正常

[root@node1 softbak]# /usr/NX/bin/nxserver --status
NX> 900 Connecting to server ...
NX> 110 NX Server is running.
NX> 999 Bye.
[root@node1 softbak]#

3、检查连接的用户有没有问题

[root@node1 softbak]# /usr/NX/bin/nxserver --usercheck grid
NX> 900 Verifying public key authentication for NX user: grid.
NX> 900 Public key authentication succeeded.
NX> 999 Bye.

检查通过说明，用client连可以成功。如不成功还要检查一下用户的.bash_profile有没有做过其他设置

如：export DISPLAY=XXX.XXX.XXX.XXX:0.0设置

如果配置了这个设置，在连接的时候会出现连接超时现象，导致连接不上

4、查看用户列表

[root@node1 softbak]# /usr/NX/bin/nxserver --userlist
NX> 149 Listing NX users:

Username
--------------------------------
oracle
grid

NX> 999 Bye.

5、添加用户
[root@node1 softbak]# /usr/NX/bin/nxserver --useradd test --system
NX> 536 ERROR: Reached the maximum number of allowed users on this server.
NX> 999 Bye.

 

6、删除用户

[root@node1 softbak]# /usr/NX/bin/nxserver --userdel oracle
NX> 900 Disabling user: oracle in the NX user DB.
NX> 900 NX user DB is disabled.
NX> 900 NX password DB is disabled.
NX> 900 To remove user: oracle from the system, please
NX> 900 run the command with option: --system.
NX> 999 Bye.