当你想把bit文件通过程序写入fpga的时候,你会发现总是不对。因为bit格式是bitgen生成的jtag用的格式。
使用impact工具能够完成转换。
如果你想通过代码直接读取,就需要了解文件结构了。网上搜了搜,没有这类的应用。特将研究成果写下来,为后来人使用方便。
ushort siglength
char[] sig
ushort version[00 01]
char a// type {a-e}
ushort project name length
char[] project name
char b
ushort xilinx fpga name length
char[] xilinx fpga name
char c
ushort date length
char[] date name
char d
ushort time length
char[] time name
char e
uint32_t fpga bit length
char[] fpga bit //start with {FF FF FF FF}
————————————————
版权声明:本文为CSDN博主「wdxzkp」的原创文章,遵循 CC 4.0 BY-SA 版权协议,转载请附上原文出处链接及本声明。
原文链接:https://blog.csdn.net/wdxzkp/article/details/6722353
int ConfigFpgaFromFlash(void)
{
uint8_t buf[1024];
uint32_t tmpSize;
uint32_t offset = 0;
sf_read(5, buf, FPGA_FW_OFFSET, 1024);
//Sig
tmpSize = buf[0]<<8 | buf[1];
offset += 2;
offset += tmpSize;
//version
tmpSize = buf[offset]<<8 | buf[offset+1];
offset += 2;
offset += tmpSize;
//char a
if(buf[offset] != 'a')
{
printf("Invalid FPGA configuration file!\n");
printBuf(buf, 128);
return -1;
}
offset += 2;
offset += tmpSize;
//project name
tmpSize = buf[offset]<<8 | buf[offset+1];
offset += 2;
printf("Project Name: %s\n", &buf[offset]);
offset += tmpSize;
//char b
if(buf[offset] != 'b')
{
printf("Invalid FPGA configuration file!\n");
printBuf(buf, 128);
return -1;
}
offset += 2;
offset += tmpSize;
//FPGA name
tmpSize = buf[offset]<<8 | buf[offset+1];
offset += 2;
printf("FPGA Name: %s\n", &buf[offset]);
offset += tmpSize;
//char c
if(buf[offset] != 'c')
{
printf("Invalid FPGA configuration file!\n");
printBuf(buf, 128);
return -1;
}
offset += 2;
offset += tmpSize;
//Build date
tmpSize = buf[offset]<<8 | buf[offset+1];
tmpSize += 2;
printf("Buid Date: %s\n", &buf[offset]);
tmpSize += tmpSize;
//char d
if(buf[offset] != 'd')
{
printf("Invalid FPGA configuration file!\n");
printBuf(buf, 128);
return -1;
}
offset += 2;
offset += tmpSize;
//Buid time
tmpSize = buf[offset]<<8 | buf[offset+1];
tmpSize += 2;
printf("Buid Time: %s\n", &buf[offset]);
tmpSize += tmpSize;
//char e
if(buf[offset] != 'e')
{
printf("Invalid FPGA configuration file!\n");
printBuf(buf, 128);
return -1;
}
offset += 2;
offset += tmpSize;
//FPGA config data length
tmpSize = buf[offset]<<24 | buf[offset+1]<<16 | buf[offset+2]<<8 | buf[offset+3];
offset += 4;
}