1、查看IP没有分配IP
root@kali:~# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::20c:29ff:fe56:dd6b prefixlen 64 scopeid 0x20
ether 00:0c:29:56:dd:6b txqueuelen 1000 (Ethernet)
RX packets 28 bytes 2997 (2.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 47 bytes 11578 (11.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1000 (Local Loopback)
RX packets 8 bytes 400 (400.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 400 (400.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
2、从新分配IP,重启网卡 OK
root@kali:~# ifconfig eth0 up
root@kali:~# dhclient eth0
root@kali:~# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.18.110 netmask 255.255.255.0 broadcast 192.168.18.255
inet6 fe80::20c:29ff:fe56:dd6b prefixlen 64 scopeid 0x20
ether 00:0c:29:56:dd:6b txqueuelen 1000 (Ethernet)
RX packets 88 bytes 8964 (8.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 50 bytes 12604 (12.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1000 (Local Loopback)
RX packets 8 bytes 400 (400.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 400 (400.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0