9361 no-os 可配置内容和控制台指令

笔记
https://wiki.analog.com/resources/eval/user-guides/ad-fmcomms2-ebz/software/baremetal
9361no-os软件
介绍9361配置的全局，收发设置。
使能/获取状态机ENSM、获取/设置射频增益、获取/设置rx射频带宽、
获取/设置rx采样频率、获取/设置rx LO（本振）频率、在内部/外部切换LO、
获取RSSI（接受信号强度指示器）、获取/设置增益控制模式、
获取/配置/启用/关闭rx fir滤波器、获取/启用/禁用rx rfdc跟踪、
获取RX基带dc跟踪的状态、获取/启用/禁用RX正交跟踪、
获取/设置RX射频输入端口、存储RX fastlock配置文件、召回/保存指定的RX fastlock配置文件、
获取RX本振电源状态、关闭RX本地振荡器、
设置所选信道的传输衰减、获取所选通道的电流传输衰减、
获取/设置tx射频带宽、获取/设置tx采样频率、获取/设置tx LO本振频率、
设置tx FIR滤波器配置、获取/配置/启用/关闭tx fir滤波器、
获取/设置TX射频输出端口、获取tx RSSI、获取状态/启用/禁用tx自动校准、
存储TX fastlock配置文件、召回/保存指定的TX fastlock配置文件、
加载TX fastlock配置文件、关闭TX本地振荡器、获取TX本振电源状态、
设置/获取RX和TX路径速率、设置通道数模式、多芯片同步、
启用/禁用TRX FIR滤波器、设置OSR速率调控器、获取OSR利率调控器、
执行选定的校准、加载和启用TRX FIR滤波器配置、是否进行DCXO粗调优、
DCXO是否进行微调、得到温度、

控制台指令

Command	Description
help?	Displays all available commands.
register?	Gets the specified register value.
tx_lo_freq?	Gets current TX LO frequency [MHz].
tx_lo_freq=	Sets the TX LO frequency [MHz].
tx_samp_freq?	Gets current TX sampling frequency [Hz].
tx_samp_freq=	Sets the TX sampling frequency [Hz].
tx_rf_bandwidth?	Gets current TX RF bandwidth [Hz].
tx_rf_bandwidth=	Sets the TX RF bandwidth [Hz].
tx1_attenuation?	Gets current TX1 attenuation [mdB].
tx1_attenuation=	Sets the TX1 attenuation [mdB].
tx2_attenuation?	Gets current TX2 attenuation [mdB].
tx2_attenuation=	Sets the TX2 attenuation [mdB].
tx_fir_en?	Gets current TX FIR state.
tx_fir_en=	Sets the TX FIR state.
rx_lo_freq?	Gets current RX LO frequency [MHz].
rx_lo_freq=	Sets the RX LO frequency [MHz].
rx_samp_freq?	Gets current RX sampling frequency [Hz].
rx_samp_freq=	Sets the RX sampling frequency [Hz].
rx_rf_bandwidth?	Gets current RX RF bandwidth [Hz].
rx_rf_bandwidth=	Sets the RX RF bandwidth [Hz].
rx1_gc_mode?	Gets current RX1 GC mode.
rx1_gc_mode=	Sets the RX1 GC mode.
rx2_gc_mode?	Gets current RX2 GC mode.
rx2_gc_mode=	Sets the RX2 GC mode.
rx1_rf_gain?	Gets current RX1 RF gain.
rx1_rf_gain=	Sets the RX1 RF gain.
rx2_rf_gain?	Gets current RX2 RF gain.
rx2_rf_gain=	Sets the RX2 RF gain.
rx_fir_en?	Gets current RX FIR state.
rx_fir_en=	Sets the RX FIR state.
dds_tx1_f1_freq?	Gets current DDS TX1 F1 frequency [MHz].
dds_tx1_f1_freq=	Sets the DDS TX1 F1 frequency [MHz].
dds_tx1_f2_freq?	Gets current DDS TX1 F2 frequency [MHz].
dds_tx1_f2_freq=	Sets the DDS TX1 F2 frequency [MHz].
dds_tx1_f1_phase?	Gets current DDS TX1 F1 phase [degrees].
dds_tx1_f1_phase=	Sets the DDS TX1 F1 phase [degrees].
dds_tx1_f2_phase?	Gets current DDS TX1 F2 phase [degrees].
dds_tx1_f2_phase=	Sets the DDS TX1 F2 phase [degrees].
dds_tx1_f1_scale?	Gets current DDS TX1 F1 scale.
dds_tx1_f1_scale=	Sets the DDS TX1 F1 scale.
dds_tx1_f2_scale?	Gets current DDS TX1 F2 scale.
dds_tx1_f2_scale=	Sets the DDS TX1 F2 scale.
dds_tx2_f1_freq?	Gets current DDS TX2 F1 frequency [MHz].
dds_tx2_f1_freq=	Sets the DDS TX2 F1 frequency [MHz].
dds_tx2_f2_freq?	Gets current DDS TX2 F2 frequency [MHz].
dds_tx2_f2_freq=	Sets the DDS TX2 F2 frequency [MHz].
dds_tx2_f1_phase?	Gets current DDS TX2 F1 phase [degrees].
dds_tx2_f1_phase=	Sets the DDS TX2 F1 phase [degrees].
dds_tx2_f2_phase?	Gets current DDS TX2 F2 phase [degrees].
dds_tx2_f2_phase=	Sets the DDS TX2 F2 phase [degrees].
dds_tx2_f1_scale?	Gets current DDS TX2 F1 scale.
dds_tx2_f1_scale=	Sets the DDS TX2 F1 scale.
dds_tx2_f2_scale?	Gets current DDS TX2 F2 scale.
dds_tx2_f2_scale=	Sets the DDS TX2 F2 scale.