Glide加载图片源码分析（一）

一般情况下，我们用Glide加载图片如下：

Glide.with(this).load(url).into(imageView);

接下来基于Glide4.9.0源码分析图片加载主线流程。

with

with是Glide提供的有一组静态方法，它有好几个重载方法，如下所示：

public class Glide{
	...
	@NonNull
  public static RequestManager with(@NonNull Context context) {
    return getRetriever(context).get(context);
  }

 @NonNull
  public static RequestManager with(@NonNull Activity activity) {
    return getRetriever(activity).get(activity);
  }

@NonNull
  public static RequestManager with(@NonNull FragmentActivity activity) {
    return getRetriever(activity).get(activity);
  }

 @NonNull
  public static RequestManager with(@NonNull Fragment fragment) {
    return getRetriever(fragment.getContext()).get(fragment);
  }
  
 @Deprecated
  @NonNull
  public static RequestManager with(@NonNull android.app.Fragment fragment) {
    return getRetriever(fragment.getActivity()).get(fragment);
  }

@NonNull
  public static RequestManager with(@NonNull View view) {
    return getRetriever(view.getContext()).get(view);
  }
}

可以看到，with方法的重载种类非常多，可以传入Context，FragmentActivity，Activity，Fragment，View等类型。每一个with方法都非常类似，都是先调用一个getRetriever方法然后调用一个get方法。
getRetriever方法返回一个RequestManagerRetriever的类型，如下所示：

 @NonNull
  private static RequestManagerRetriever getRetriever(@Nullable Context context) {
    // Context could be null for other reasons (ie the user passes in null), but in practice it will
    // only occur due to errors with the Fragment lifecycle.
    Preconditions.checkNotNull(
        context,
        "You cannot start a load on a not yet attached View or a Fragment where getActivity() "
            + "returns null (which usually occurs when getActivity() is called before the Fragment "
            + "is attached or after the Fragment is destroyed).");
    return Glide.get(context).getRequestManagerRetriever();
  }

接下来我们看下RequestManagerRetriever 的get方法

public class RequestManagerRetriever implements Handler.Callback{

	...
	
  @NonNull
  private RequestManager getApplicationManager(@NonNull Context context) {
    // Either an application context or we're on a background thread.
    if (applicationManager == null) {
      synchronized (this) {
        if (applicationManager == null) {
          // Normally pause/resume is taken care of by the fragment we add to the fragment or
          // activity. However, in this case since the manager attached to the application will not
          // receive lifecycle events, we must force the manager to start resumed using
          // ApplicationLifecycle.

          // TODO(b/27524013): Factor out this Glide.get() call.
          Glide glide = Glide.get(context.getApplicationContext());
          applicationManager =
              factory.build(
                  glide,
                  new ApplicationLifecycle(),
                  new EmptyRequestManagerTreeNode(),
                  context.getApplicationContext());
        }
      }
    }

    return applicationManager;
  }
	
	@NonNull
  public RequestManager get(@NonNull Context context) {
    if (context == null) {
      throw new IllegalArgumentException("You cannot start a load on a null Context");
    } else if (Util.isOnMainThread() && !(context instanceof Application)) {
      if (context instanceof FragmentActivity) {
        return get((FragmentActivity) context);
      } else if (context instanceof Activity) {
        return get((Activity) context);
      } else if (context instanceof ContextWrapper
          // Only unwrap a ContextWrapper if the baseContext has a non-null application context.
          // Context#createPackageContext may return a Context without an Application instance,
          // in which case a ContextWrapper may be used to attach one.
          && ((ContextWrapper) context).getBaseContext().getApplicationContext() != null) {
        return get(((ContextWrapper) context).getBaseContext());
      }
    }

    return getApplicationManager(context);
  }

  @NonNull
  public RequestManager get(@NonNull FragmentActivity activity) {
    if (Util.isOnBackgroundThread()) {
      return get(activity.getApplicationContext());
    } else {
      assertNotDestroyed(activity);
      FragmentManager fm = activity.getSupportFragmentManager();
      return supportFragmentGet(activity, fm, /*parentHint=*/ null, isActivityVisible(activity));
    }
  }

  @NonNull
  public RequestManager get(@NonNull Fragment fragment) {
    Preconditions.checkNotNull(
        fragment.getContext(),
        "You cannot start a load on a fragment before it is attached or after it is destroyed");
    if (Util.isOnBackgroundThread()) {
      return get(fragment.getContext().getApplicationContext());
    } else {
      FragmentManager fm = fragment.getChildFragmentManager();
      return supportFragmentGet(fragment.getContext(), fm, fragment, fragment.isVisible());
    }
  }

  @SuppressWarnings("deprecation")
  @NonNull
  public RequestManager get(@NonNull Activity activity) {
    if (Util.isOnBackgroundThread()) {
      return get(activity.getApplicationContext());
    } else {
      assertNotDestroyed(activity);
      android.app.FragmentManager fm = activity.getFragmentManager();
      return fragmentGet(activity, fm, /*parentHint=*/ null, isActivityVisible(activity));
    }
  }

  @SuppressWarnings("deprecation")
  @NonNull
  public RequestManager get(@NonNull View view) {
    if (Util.isOnBackgroundThread()) {
      return get(view.getContext().getApplicationContext());
    }

    Preconditions.checkNotNull(view);
    Preconditions.checkNotNull(
        view.getContext(), "Unable to obtain a request manager for a view without a Context");
    Activity activity = findActivity(view.getContext());
    // The view might be somewhere else, like a service.
    if (activity == null) {
      return get(view.getContext().getApplicationContext());
    }

    // Support Fragments.
    // Although the user might have non-support Fragments attached to FragmentActivity, searching
    // for non-support Fragments is so expensive pre O and that should be rare enough that we
    // prefer to just fall back to the Activity directly.
    if (activity instanceof FragmentActivity) {
      Fragment fragment = findSupportFragment(view, (FragmentActivity) activity);
      return fragment != null ? get(fragment) : get(activity);
    }

    // Standard Fragments.
    android.app.Fragment fragment = findFragment(view, activity);
    if (fragment == null) {
      return get(activity);
    }
    return get(fragment);
  }

	...

  @SuppressWarnings("deprecation")
  @Deprecated
  @NonNull
  RequestManagerFragment getRequestManagerFragment(Activity activity) {
    return getRequestManagerFragment(
        activity.getFragmentManager(), /*parentHint=*/ null, isActivityVisible(activity));
  }

  @SuppressWarnings("deprecation")
  @NonNull
  private RequestManagerFragment getRequestManagerFragment(
      @NonNull final android.app.FragmentManager fm,
      @Nullable android.app.Fragment parentHint,
      boolean isParentVisible) {
    RequestManagerFragment current = (RequestManagerFragment) fm.findFragmentByTag(FRAGMENT_TAG);
    if (current == null) {
      current = pendingRequestManagerFragments.get(fm);
      if (current == null) {
        current = new RequestManagerFragment();
        current.setParentFragmentHint(parentHint);
        if (isParentVisible) {
          current.getGlideLifecycle().onStart();
        }
        pendingRequestManagerFragments.put(fm, current);
        fm.beginTransaction().add(current, FRAGMENT_TAG).commitAllowingStateLoss();
        handler.obtainMessage(ID_REMOVE_FRAGMENT_MANAGER, fm).sendToTarget();
      }
    }
    return current;
  }

  @SuppressWarnings({"deprecation", "DeprecatedIsStillUsed"})
  @Deprecated
  @NonNull
  private RequestManager fragmentGet(
      @NonNull Context context,
      @NonNull android.app.FragmentManager fm,
      @Nullable android.app.Fragment parentHint,
      boolean isParentVisible) {
    RequestManagerFragment current = getRequestManagerFragment(fm, parentHint, isParentVisible);
    RequestManager requestManager = current.getRequestManager();
    if (requestManager == null) {
      // TODO(b/27524013): Factor out this Glide.get() call.
      Glide glide = Glide.get(context);
      requestManager =
          factory.build(
              glide, current.getGlideLifecycle(), current.getRequestManagerTreeNode(), context);
      current.setRequestManager(requestManager);
    }
    return requestManager;
  }

  @NonNull
  SupportRequestManagerFragment getSupportRequestManagerFragment(
      Context context, FragmentManager fragmentManager) {
    return getSupportRequestManagerFragment(
        fragmentManager, /*parentHint=*/ null, isActivityVisible(context));
  }

  private static boolean isActivityVisible(Context context) {
    // This is a poor heuristic, but it's about all we have. We'd rather err on the side of visible
    // and start requests than on the side of invisible and ignore valid requests.
    Activity activity = findActivity(context);
    return activity == null || !activity.isFinishing();
  }

  @NonNull
  private SupportRequestManagerFragment getSupportRequestManagerFragment(
      @NonNull final FragmentManager fm, @Nullable Fragment parentHint, boolean isParentVisible) {
    SupportRequestManagerFragment current =
        (SupportRequestManagerFragment) fm.findFragmentByTag(FRAGMENT_TAG);
    if (current == null) {
      current = pendingSupportRequestManagerFragments.get(fm);
      if (current == null) {
        current = new SupportRequestManagerFragment();
        current.setParentFragmentHint(parentHint);
        if (isParentVisible) {
          current.getGlideLifecycle().onStart();
        }
        pendingSupportRequestManagerFragments.put(fm, current);
        fm.beginTransaction().add(current, FRAGMENT_TAG).commitAllowingStateLoss();
        handler.obtainMessage(ID_REMOVE_SUPPORT_FRAGMENT_MANAGER, fm).sendToTarget();
      }
    }
    return current;
  }

  @NonNull
  private RequestManager supportFragmentGet(
      @NonNull Context context,
      @NonNull FragmentManager fm,
      @Nullable Fragment parentHint,
      boolean isParentVisible) {
    SupportRequestManagerFragment current =
        getSupportRequestManagerFragment(fm, parentHint, isParentVisible);
    RequestManager requestManager = current.getRequestManager();
    if (requestManager == null) {
      // TODO(b/27524013): Factor out this Glide.get() call.
      Glide glide = Glide.get(context);
      requestManager =
          factory.build(
              glide, current.getGlideLifecycle(), current.getRequestManagerTreeNode(), context);
      current.setRequestManager(requestManager);
    }
    return requestManager;
  }
}

上述代码看上去逻辑有点复杂，梳理下可以发现，RequestManagerRetriever类中的get方法大致分为两种情况，即传入Application类型的参数和非Application类型的参数。

对于传入Application类型的参数，如果在Glide.with()方法中传入的是一个Application对象，会调用getApplicationManager方法来获取一个RequestManager对象，此时，Glide加载的生命周期和Application的生命周期是同步的，Application的生命周期就是应用程序的生命周期，所以如果应用程序关闭的话，Glide的加载也会同时终止。另外，如果是在非主线程中使用的Glide，不管传入的是Fragment还是Activity，都会被强制当成Application来处理。

对于传入非Application类型的情况。不管你Glide.with方法中传入的是Fragment还是Activity，都会向当前的Activity中加入一个隐藏的Fragment，并返回一个RequestManager对象，这个RequestManager对象中保存有隐藏Fragment的生命周期，这样如果加载图片的Activity被销毁了，隐藏Fragmeng可以监听到，这样Glide就可以捕获这个事件从而停止加载图片。

总的来说，with方法根据传入的参数来确定加载图片的生命周期，并且最终都会得到一个RequestManager的对象。

load

RequestManager的load方法也有很多重载方法，如下所示：

public class RequestManager implements LifecycleListener, ModelTypes<RequestBuilder<Drawable>>{
	
	...
	
  @NonNull
  @CheckResult
  public RequestBuilder<Bitmap> asBitmap() {
    return as(Bitmap.class).apply(DECODE_TYPE_BITMAP);
  }

  @NonNull
  @CheckResult
  public RequestBuilder<GifDrawable> asGif() {
    return as(GifDrawable.class).apply(DECODE_TYPE_GIF);
  }

  @NonNull
  @CheckResult
  public RequestBuilder<Drawable> asDrawable() {
    return as(Drawable.class);
  }

  @NonNull
  @CheckResult
  public <ResourceType> RequestBuilder<ResourceType> as(
      @NonNull Class<ResourceType> resourceClass) {
    return new RequestBuilder<>(glide, this, resourceClass, context);
  }

  @NonNull
  @CheckResult
  @Override
  public RequestBuilder<Drawable> load(@Nullable Bitmap bitmap) {
    return asDrawable().load(bitmap);
  }

  @NonNull
  @CheckResult
  @Override
  public RequestBuilder<Drawable> load(@Nullable Drawable drawable) {
    return asDrawable().load(drawable);
  }

  @NonNull
  @CheckResult
  @Override
  public RequestBuilder<Drawable> load(@Nullable String string) {
    return asDrawable().load(string);
  }

  @NonNull
  @CheckResult
  @Override
  public RequestBuilder<Drawable> load(@Nullable Uri uri) {
    return asDrawable().load(uri);
  }

  @NonNull
  @CheckResult
  @Override
  public RequestBuilder<Drawable> load(@Nullable File file) {
    return asDrawable().load(file);
  }

 @SuppressWarnings("deprecation")
  @NonNull
  @CheckResult
  @Override
  public RequestBuilder<Drawable> load(@RawRes @DrawableRes @Nullable Integer resourceId) {
    return asDrawable().load(resourceId);
  }

  @SuppressWarnings("deprecation")
  @CheckResult
  @Override
  @Deprecated
  public RequestBuilder<Drawable> load(@Nullable URL url) {
    return asDrawable().load(url);
  }

 @NonNull
  @CheckResult
  @Override
  public RequestBuilder<Drawable> load(@Nullable byte[] model) {
    return asDrawable().load(model);
  }

 @NonNull
  @CheckResult
  @Override
  public RequestBuilder<Drawable> load(@Nullable Object model) {
    return asDrawable().load(model);
  }

  ...

}

从上面代码中可以看到，load方法中会先调用一个as函数，像asBitmap，asGif或者asDrawable，as系列函数会返回一个RequestBuilder的泛型对象，然后调用该对象的load函数。

RequestBuilder的load函数如下所示：

 @NonNull
  @CheckResult
  @SuppressWarnings("unchecked")
  @Override
  public RequestBuilder<TranscodeType> load(@Nullable Object model) {
    return loadGeneric(model);
  }

  @NonNull
  private RequestBuilder<TranscodeType> loadGeneric(@Nullable Object model) {
    this.model = model;
    isModelSet = true;
    return this;
  }

另外可以看到RequestBuilder继承了BaseRequestOptions，而BaseRequestOptions中封装了我们日常常用一些方法，比如error，placeholder，override，skipMemoryCache，diskCacheStrategy等等方法，这里由于只分析Glide加载图主线流程，就不会这个方法进行深入分析了。

load方法返回RequestBuilder对象之后，接下来我们分析into方法。

into

into方法是整个Glide加载图片过程中最复杂的一部分。
into方法代码如下：

 @NonNull
  public ViewTarget<ImageView, TranscodeType> into(@NonNull ImageView view) {
    Util.assertMainThread();
    Preconditions.checkNotNull(view);

    BaseRequestOptions<?> requestOptions = this;
    if (!requestOptions.isTransformationSet()
        && requestOptions.isTransformationAllowed()
        && view.getScaleType() != null) {
      // Clone in this method so that if we use this RequestBuilder to load into a View and then
      // into a different target, we don't retain the transformation applied based on the previous
      // View's scale type.
      switch (view.getScaleType()) {
        case CENTER_CROP:
          requestOptions = requestOptions.clone().optionalCenterCrop();
          break;
        case CENTER_INSIDE:
          requestOptions = requestOptions.clone().optionalCenterInside();
          break;
        case FIT_CENTER:
        case FIT_START:
        case FIT_END:
          requestOptions = requestOptions.clone().optionalFitCenter();
          break;
        case FIT_XY:
          requestOptions = requestOptions.clone().optionalCenterInside();
          break;
        case CENTER:
        case MATRIX:
        default:
          // Do nothing.
      }
    }

    return into(
        glideContext.buildImageViewTarget(view, transcodeClass),
        /*targetListener=*/ null,
        requestOptions,
        Executors.mainThreadExecutor());
  }

最后一行会调用glideContext.buildImageViewTarget(view, transcodeClass)来构建一个target对象，这个target对象是用来显示图片用的，我们来看下：

@NonNull
  public <X> ViewTarget<ImageView, X> buildImageViewTarget(
      @NonNull ImageView imageView, @NonNull Class<X> transcodeClass) {
    return imageViewTargetFactory.buildTarget(imageView, transcodeClass);
  }

这里会调用ImageViewTargetFactory的buildTarget()方法，代码如下：

public class ImageViewTargetFactory {
  @NonNull
  @SuppressWarnings("unchecked")
  public <Z> ViewTarget<ImageView, Z> buildTarget(
      @NonNull ImageView view, @NonNull Class<Z> clazz) {
    if (Bitmap.class.equals(clazz)) {
      return (ViewTarget<ImageView, Z>) new BitmapImageViewTarget(view);
    } else if (Drawable.class.isAssignableFrom(clazz)) {
      return (ViewTarget<ImageView, Z>) new DrawableImageViewTarget(view);
    } else {
      throw new IllegalArgumentException(
          "Unhandled class: " + clazz + ", try .as*(Class).transcode(ResourceTranscoder)");
    }
  }
}

在buildTarget()方法中会根据传入的class参数来构建不同的Target对象，那这个class参数从哪里来呢，追溯可知，这个在前面load的时候由调用asBitmap()，asDrawable()等方法，默认情况下是asDrawable，里面的as方法传入的是Drawable.class，如果加载图片时加上了asBitmap，那么里面会调用as方法并传入Bitmap.class，而这个就是最终传递到buildTarget()方法的class参数。所以，如果你在使用Glide加载图片的时候调用了asBitmap()方法，那么这里就会构建出BitmapImageViewTarget对象，否则的话构建的都是DrawableImageViewTarget对象。

这里我们分析一般情况，也就是说buildImageViewTarget会创建一个DrawableImageViewTarget对象。接着我们继续进入上面into方法最后一行分析：

private <Y extends Target<TranscodeType>> Y into(
      @NonNull Y target,
      @Nullable RequestListener<TranscodeType> targetListener,
      BaseRequestOptions<?> options,
      Executor callbackExecutor) {
    Preconditions.checkNotNull(target);
    if (!isModelSet) {
      throw new IllegalArgumentException("You must call #load() before calling #into()");
    }

    Request request = buildRequest(target, targetListener, options, callbackExecutor);

    Request previous = target.getRequest();
    if (request.isEquivalentTo(previous)
        && !isSkipMemoryCacheWithCompletePreviousRequest(options, previous)) {
      request.recycle();
      // If the request is completed, beginning again will ensure the result is re-delivered,
      // triggering RequestListeners and Targets. If the request is failed, beginning again will
      // restart the request, giving it another chance to complete. If the request is already
      // running, we can let it continue running without interruption.
      if (!Preconditions.checkNotNull(previous).isRunning()) {
        // Use the previous request rather than the new one to allow for optimizations like skipping
        // setting placeholders, tracking and un-tracking Targets, and obtaining View dimensions
        // that are done in the individual Request.
        previous.begin();
      }
      return target;
    }

    requestManager.clear(target);
    target.setRequest(request);
    requestManager.track(target, request);

    return target;
  }

这里会通过buildRequest方法创建一个request的对象。如果这个target上之前已经创建过一个request对象previous并且和新创建的request相等，就调用previous的begin方法，否则调用requestManager.clear(target)，并设置target的request为新创建的request，然后调用requestManager.track(target, request)方法，我们看看这个track方法。

synchronized void track(@NonNull Target<?> target, @NonNull Request request) {
    targetTracker.track(target);
    requestTracker.runRequest(request);
  }

这里继续调用了 requestTracker.runRequest(request);

public void runRequest(@NonNull Request request) {
    requests.add(request);
    if (!isPaused) {
      request.begin();
    } else {
      request.clear();
      if (Log.isLoggable(TAG, Log.VERBOSE)) {
        Log.v(TAG, "Paused, delaying request");
      }
      pendingRequests.add(request);
    }
  }

从上面可以，最终会调用request.begin()，点进去发现Request是一个接口，那么这个Request接口的具体实现在哪里呢，我们回到上面的buildRequest()方法就可以知道。

 private Request buildRequest(
      Target<TranscodeType> target,
      @Nullable RequestListener<TranscodeType> targetListener,
      BaseRequestOptions<?> requestOptions,
      Executor callbackExecutor) {
    return buildRequestRecursive(
        target,
        targetListener,
        /*parentCoordinator=*/ null,
        transitionOptions,
        requestOptions.getPriority(),
        requestOptions.getOverrideWidth(),
        requestOptions.getOverrideHeight(),
        requestOptions,
        callbackExecutor);
  }

  private Request buildRequestRecursive(
      Target<TranscodeType> target,
      @Nullable RequestListener<TranscodeType> targetListener,
      @Nullable RequestCoordinator parentCoordinator,
      TransitionOptions<?, ? super TranscodeType> transitionOptions,
      Priority priority,
      int overrideWidth,
      int overrideHeight,
      BaseRequestOptions<?> requestOptions,
      Executor callbackExecutor) {

    // Build the ErrorRequestCoordinator first if necessary so we can update parentCoordinator.
    ErrorRequestCoordinator errorRequestCoordinator = null;
    if (errorBuilder != null) {
      errorRequestCoordinator = new ErrorRequestCoordinator(parentCoordinator);
      parentCoordinator = errorRequestCoordinator;
    }

    Request mainRequest =
        buildThumbnailRequestRecursive(
            target,
            targetListener,
            parentCoordinator,
            transitionOptions,
            priority,
            overrideWidth,
            overrideHeight,
            requestOptions,
            callbackExecutor);

    if (errorRequestCoordinator == null) {
      return mainRequest;
    }

    int errorOverrideWidth = errorBuilder.getOverrideWidth();
    int errorOverrideHeight = errorBuilder.getOverrideHeight();
    if (Util.isValidDimensions(overrideWidth, overrideHeight) && !errorBuilder.isValidOverride()) {
      errorOverrideWidth = requestOptions.getOverrideWidth();
      errorOverrideHeight = requestOptions.getOverrideHeight();
    }

    Request errorRequest =
        errorBuilder.buildRequestRecursive(
            target,
            targetListener,
            errorRequestCoordinator,
            errorBuilder.transitionOptions,
            errorBuilder.getPriority(),
            errorOverrideWidth,
            errorOverrideHeight,
            errorBuilder,
            callbackExecutor);
    errorRequestCoordinator.setRequests(mainRequest, errorRequest);
    return errorRequestCoordinator;
  }

buildRequest()方法会调用buildRequestRecursive()方法，buildThumbnailRequestRecursive方法中又会调用buildThumbnailRequestRecursive()方法，接下来我们看看buildThumbnailRequestRecursive()方法。

private Request buildThumbnailRequestRecursive(
      Target<TranscodeType> target,
      RequestListener<TranscodeType> targetListener,
      @Nullable RequestCoordinator parentCoordinator,
      TransitionOptions<?, ? super TranscodeType> transitionOptions,
      Priority priority,
      int overrideWidth,
      int overrideHeight,
      BaseRequestOptions<?> requestOptions,
      Executor callbackExecutor) {
    if (thumbnailBuilder != null) {
      // Recursive case: contains a potentially recursive thumbnail request builder.
      if (isThumbnailBuilt) {
        throw new IllegalStateException(
            "You cannot use a request as both the main request and a "
                + "thumbnail, consider using clone() on the request(s) passed to thumbnail()");
      }

      TransitionOptions<?, ? super TranscodeType> thumbTransitionOptions =
          thumbnailBuilder.transitionOptions;

      // Apply our transition by default to thumbnail requests but avoid overriding custom options
      // that may have been applied on the thumbnail request explicitly.
      if (thumbnailBuilder.isDefaultTransitionOptionsSet) {
        thumbTransitionOptions = transitionOptions;
      }

      Priority thumbPriority =
          thumbnailBuilder.isPrioritySet()
              ? thumbnailBuilder.getPriority()
              : getThumbnailPriority(priority);

      int thumbOverrideWidth = thumbnailBuilder.getOverrideWidth();
      int thumbOverrideHeight = thumbnailBuilder.getOverrideHeight();
      if (Util.isValidDimensions(overrideWidth, overrideHeight)
          && !thumbnailBuilder.isValidOverride()) {
        thumbOverrideWidth = requestOptions.getOverrideWidth();
        thumbOverrideHeight = requestOptions.getOverrideHeight();
      }

      ThumbnailRequestCoordinator coordinator = new ThumbnailRequestCoordinator(parentCoordinator);
      Request fullRequest =
          obtainRequest(
              target,
              targetListener,
              requestOptions,
              coordinator,
              transitionOptions,
              priority,
              overrideWidth,
              overrideHeight,
              callbackExecutor);
      isThumbnailBuilt = true;
      // Recursively generate thumbnail requests.
      Request thumbRequest =
          thumbnailBuilder.buildRequestRecursive(
              target,
              targetListener,
              coordinator,
              thumbTransitionOptions,
              thumbPriority,
              thumbOverrideWidth,
              thumbOverrideHeight,
              thumbnailBuilder,
              callbackExecutor);
      isThumbnailBuilt = false;
      coordinator.setRequests(fullRequest, thumbRequest);
      return coordinator;
    } else if (thumbSizeMultiplier != null) {
      // Base case: thumbnail multiplier generates a thumbnail request, but cannot recurse.
      ThumbnailRequestCoordinator coordinator = new ThumbnailRequestCoordinator(parentCoordinator);
      Request fullRequest =
          obtainRequest(
              target,
              targetListener,
              requestOptions,
              coordinator,
              transitionOptions,
              priority,
              overrideWidth,
              overrideHeight,
              callbackExecutor);
      BaseRequestOptions<?> thumbnailOptions =
          requestOptions.clone().sizeMultiplier(thumbSizeMultiplier);

      Request thumbnailRequest =
          obtainRequest(
              target,
              targetListener,
              thumbnailOptions,
              coordinator,
              transitionOptions,
              getThumbnailPriority(priority),
              overrideWidth,
              overrideHeight,
              callbackExecutor);

      coordinator.setRequests(fullRequest, thumbnailRequest);
      return coordinator;
    } else {
      // Base case: no thumbnail.
      return obtainRequest(
          target,
          targetListener,
          requestOptions,
          parentCoordinator,
          transitionOptions,
          priority,
          overrideWidth,
          overrideHeight,
          callbackExecutor);
    }
  }

private Request obtainRequest(
      Target<TranscodeType> target,
      RequestListener<TranscodeType> targetListener,
      BaseRequestOptions<?> requestOptions,
      RequestCoordinator requestCoordinator,
      TransitionOptions<?, ? super TranscodeType> transitionOptions,
      Priority priority,
      int overrideWidth,
      int overrideHeight,
      Executor callbackExecutor) {
    return SingleRequest.obtain(
        context,
        glideContext,
        model,
        transcodeClass,
        requestOptions,
        overrideWidth,
        overrideHeight,
        priority,
        target,
        targetListener,
        requestListeners,
        requestCoordinator,
        glideContext.getEngine(),
        transitionOptions.getTransitionFactory(),
        callbackExecutor);
  }

buildThumbnailRequestRecursive()方法中大部分代码在处理缩略图，只看主要流程的话，这里会调用最后else里面的obtainRequest()方法，在obtainRequest()方法中会继续调用SingleRequest.obtain()来获取Request，我们继续看。

public final class SingleRequest<R>
    implements Request, SizeReadyCallback, ResourceCallback, FactoryPools.Poolable {

	...

   public static <R> SingleRequest<R> obtain(
      Context context,
      GlideContext glideContext,
      Object model,
      Class<R> transcodeClass,
      BaseRequestOptions<?> requestOptions,
      int overrideWidth,
      int overrideHeight,
      Priority priority,
      Target<R> target,
      RequestListener<R> targetListener,
      @Nullable List<RequestListener<R>> requestListeners,
      RequestCoordinator requestCoordinator,
      Engine engine,
      TransitionFactory<? super R> animationFactory,
      Executor callbackExecutor) {
    @SuppressWarnings("unchecked")
    SingleRequest<R> request = (SingleRequest<R>) POOL.acquire();
    if (request == null) {
      request = new SingleRequest<>();
    }
    request.init(
        context,
        glideContext,
        model,
        transcodeClass,
        requestOptions,
        overrideWidth,
        overrideHeight,
        priority,
        target,
        targetListener,
        requestListeners,
        requestCoordinator,
        engine,
        animationFactory,
        callbackExecutor);
    return request;
  }

  ...

}

可以看到obtain()方法中会创建一个SingleRequest对象,所以前面调用Request的begin方法就是这里SingleRequest的begin()方法，我们继续看。

@Override
  public synchronized void begin() {
    assertNotCallingCallbacks();
    stateVerifier.throwIfRecycled();
    startTime = LogTime.getLogTime();
    if (model == null) {
      if (Util.isValidDimensions(overrideWidth, overrideHeight)) {
        width = overrideWidth;
        height = overrideHeight;
      }
      // Only log at more verbose log levels if the user has set a fallback drawable, because
      // fallback Drawables indicate the user expects null models occasionally.
      int logLevel = getFallbackDrawable() == null ? Log.WARN : Log.DEBUG;
      onLoadFailed(new GlideException("Received null model"), logLevel);
      return;
    }

    if (status == Status.RUNNING) {
      throw new IllegalArgumentException("Cannot restart a running request");
    }

    // If we're restarted after we're complete (usually via something like a notifyDataSetChanged
    // that starts an identical request into the same Target or View), we can simply use the
    // resource and size we retrieved the last time around and skip obtaining a new size, starting a
    // new load etc. This does mean that users who want to restart a load because they expect that
    // the view size has changed will need to explicitly clear the View or Target before starting
    // the new load.
    if (status == Status.COMPLETE) {
      onResourceReady(resource, DataSource.MEMORY_CACHE);
      return;
    }

    // Restarts for requests that are neither complete nor running can be treated as new requests
    // and can run again from the beginning.

    status = Status.WAITING_FOR_SIZE;
    if (Util.isValidDimensions(overrideWidth, overrideHeight)) {
      onSizeReady(overrideWidth, overrideHeight);
    } else {
      target.getSize(this);
    }

    if ((status == Status.RUNNING || status == Status.WAITING_FOR_SIZE)
        && canNotifyStatusChanged()) {
      target.onLoadStarted(getPlaceholderDrawable());
    }
    if (IS_VERBOSE_LOGGABLE) {
      logV("finished run method in " + LogTime.getElapsedMillis(startTime));
    }
  }

上面begin方法分两种情况，一种是使用了override() API为图片指定了一个固定的宽高，一种是没有指定。如果指定了的话，就会调用onSizeReady()方法，如果没有指定的话，会调用target.getSize(this)，这里的this是SizeReadyCallback，target.getSize()方法的内部会根据ImageView的layout_width和layout_height的值做一系列的计算，来算出图片应该的宽高，计算完之后回调SizeReadyCallback的onSizeReady()方法，所以，最终都会调用onSizeReady()方法，我们继续分析onSizeReady()方法。

@Override
  public synchronized void onSizeReady(int width, int height) {
    stateVerifier.throwIfRecycled();
    if (IS_VERBOSE_LOGGABLE) {
      logV("Got onSizeReady in " + LogTime.getElapsedMillis(startTime));
    }
    if (status != Status.WAITING_FOR_SIZE) {
      return;
    }
    status = Status.RUNNING;

    float sizeMultiplier = requestOptions.getSizeMultiplier();
    this.width = maybeApplySizeMultiplier(width, sizeMultiplier);
    this.height = maybeApplySizeMultiplier(height, sizeMultiplier);

    if (IS_VERBOSE_LOGGABLE) {
      logV("finished setup for calling load in " + LogTime.getElapsedMillis(startTime));
    }
    loadStatus =
        engine.load(
            glideContext,
            model,
            requestOptions.getSignature(),
            this.width,
            this.height,
            requestOptions.getResourceClass(),
            transcodeClass,
            priority,
            requestOptions.getDiskCacheStrategy(),
            requestOptions.getTransformations(),
            requestOptions.isTransformationRequired(),
            requestOptions.isScaleOnlyOrNoTransform(),
            requestOptions.getOptions(),
            requestOptions.isMemoryCacheable(),
            requestOptions.getUseUnlimitedSourceGeneratorsPool(),
            requestOptions.getUseAnimationPool(),
            requestOptions.getOnlyRetrieveFromCache(),
            this,
            callbackExecutor);

    // This is a hack that's only useful for testing right now where loads complete synchronously
    // even though under any executor running on any thread but the main thread, the load would
    // have completed asynchronously.
    if (status != Status.RUNNING) {
      loadStatus = null;
    }
    if (IS_VERBOSE_LOGGABLE) {
      logV("finished onSizeReady in " + LogTime.getElapsedMillis(startTime));
    }
  }

可以看到onSizeReady()方法中最终回到用engine.load()方法，并传入一些列的参数，由于篇幅原因，下一篇Glide加载图片源码分析（二）将继续讲解Glide图片加载流程。