qcom pll 频率修改记录

g-data2@xxxxxxxx-data2:~/work/xiaodong_xu/sdm450_a7/sdm450_a7/kernel/msm-3.18$ git diff .
diff --git a/sdm450_a7/kernel/msm-3.18/arch/arm/boot/dts/qcom/msm8953-camera-sensor-qrd.dtsi b/sdm450_a7/kernel/msm-3.18/arch/arm/boot/dts/qcom/msm8953-camera-sensor-qrd.dtsi
index 21e1c48..533d626 100755
--- a/sdm450_a7/kernel/msm-3.18/arch/arm/boot/dts/qcom/msm8953-camera-sensor-qrd.dtsi
+++ b/sdm450_a7/kernel/msm-3.18/arch/arm/boot/dts/qcom/msm8953-camera-sensor-qrd.dtsi
@@ -50,14 +50,14 @@
         qcom,cam-power-seq-val = "cam_vdig",
             "cam_vio", "sensor_cam_mclk",
             "sensor_gpio_reset";
-        qcom,cam-power-seq-cfg-val = <1 1 24000000 1>;
+        qcom,cam-power-seq-cfg-val = <1 1 16000000 1>;
         qcom,cam-power-seq-delay = <1 1 5 5>;
                
                status = "ok";
                clocks = <&clock_gcc clk_mclk0_clk_src>,
                        <&clock_gcc clk_gcc_camss_mclk0_clk>;
                clock-names = "cam_src_clk", "cam_clk";
-               qcom,clock-rates = <24000000 0>;
+               qcom,clock-rates = <16000000 0>;
        };
        
        qcom,camera@0 {
@@ -94,7 +94,7 @@
                clocks = <&clock_gcc clk_mclk0_clk_src>,
                        <&clock_gcc clk_gcc_camss_mclk0_clk>;
                clock-names = "cam_src_clk", "cam_clk";
-               qcom,clock-rates = <24000000 0>;
+               qcom,clock-rates = <16000000 0>;
        };
 
 
diff --git a/sdm450_a7/kernel/msm-3.18/drivers/clk/msm/clock-gcc-8953.c b/sdm450_a7/kernel/msm-3.18/drivers/clk/msm/clock-gcc-8953.c
index d96fc42..b836639 100644
--- a/sdm450_a7/kernel/msm-3.18/drivers/clk/msm/clock-gcc-8953.c
+++ b/sdm450_a7/kernel/msm-3.18/drivers/clk/msm/clock-gcc-8953.c
@@ -1165,7 +1165,7 @@ static struct rcg_clk camss_gp1_clk_src = {
 };
 
 static struct clk_freq_tbl ftbl_mclk0_clk_src[] = {
-       F(  24000000, gpll6_main_div2,    1,    2,    45),
+       F(  16000000, gpll6_main_div2,    1,    6,    202),
        F(  33330000, gpll0_main_div2,   12,    0,     0),
        F(  66667000,           gpll0,   12,    0,     0),
        F_END
xxxxxxxx-data2@xxxxxxxx-data2:~/work/xiaodong_xu/sdm450_a7/sdm450_a7/kernel/msm-3.18$