petalinux 16.4 安装问题

最新推荐文章于 2024-10-08 09:32:44 发布
最新推荐文章于 2024-10-08 09:32:44 发布
阅读量1.4w 收藏 5
点赞数 2
分类专栏： zynq，petalinux16.4 文章标签： zynq petalinux16.4 ubuntu16.04
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/u011529140/article/details/70258233
版权

由于某些原因，换了一台电脑，配置不高，只能拿它来练习，所以安装真机ubuntu16.04

接下来就是参考UG1144安装petalinux-v2016.4-final-installer1.run

第一个就是库的安装问题，发现两个库无法安装，一个是gpg，另一个是xvfb-dev，只安装了xvfb，不影响安装。

第二个等得了很久竟然提示zlibg：i386，sudo apt-get install zlibg:i386安装继续

第三个问题就是按照UG114安装的坑

qwer@ubuntu:~/Desktop/installer/petalinux$ sudo ./petalinux-2016.4-final.run /opt/pkg/petalinux
INFO: Checking installer checksum...
INFO: Extracting PetaLinux installer...
INFO: Installing PetaLinux...
INFO: Checking PetaLinux installer integrity...
*********************************************
WARNING: PetaLinux installation directory: /opt/pkg/petalinux/. is not empty!
*********************************************
Please input "y" to continue to install PetaLinux in that directory?[n]y
INFO: Extracting Installation files...
 
LICENSE AGREEMENTS
 
PetaLinux SDK contains software from a number of sources. Please review
the following licenses and indicate your acceptance of each to continue.
 
You do not have to accept the licenses, however if you do not then you may
not use PetaLinux SDK.
 
Use PgUp/PgDn to navigate the license viewer, and press 'q' to close
 
Press Enter to display the license agreements
Do you accept Xilinx End User License Agreement? [y/N] > y
Do you accept Webtalk Terms and Conditions? [y/N] > y
Do you accept Third Party End User License Agreement? [y/N] > y
INFO: Checking installation environment requirements...
INFO: Checking free disk space
INFO: Checking installed tools
INFO: Checking installed development libraries
INFO: Checking network and other services
INFO: Installing PetaLinux SDK to "/opt/pkg/petalinux/."
INFO: Installing PetaLinux zynqMP Yocto SDK to "/opt/pkg/petalinux/./components/yocto/source/aarch64"...
PetaLinux Extensible SDK installer version 2016.4
=================================================
ERROR: The extensible sdk cannot be installed as root.
*********************************************
ERROR: Failed to install Yocto SDK for zynqMP.
*********************************************

发现sudo和切换成root都一样，不用的话也会提示没有权限

直接用普通账户安装在家目录

vision@vision-ThinkPad-T440s:~/Desktop$ ./petalinux-v2016.4-final-installer1.run   ../pkg/petalinux
./petalinux-v2016.4-final-installer1.run: line 52: /home/vision/Desktop/petalinux_installation_log: Permission denied
tee: /home/vision/Desktop/petalinux_installation_log: Permission denied
INFO: Checking installer checksum...

tee: /home/vision/Desktop/petalinux_installation_log: Permission denied
Please refer to the PetaLinux Tools Installation Guide.

Check the troubleshooting guide at the end of that manual, and if you are
unable to resolve the issue please contact customer support with file:
   /home/vision/Desktop/petalinux_installation_log

^Ctee: /home/vision/Desktop/petalinux_installation_log: Permission denied
INFO: Extracting PetaLinux installer...
tar: /tmp/tmp.aCZvWlIcbr: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tee: /home/vision/Desktop/petalinux_installation_log: Permission denied
ERROR: Failed to extract the PetaLinux installer. Failed to install PetaLinux Tools!

提示没权限，只能尝试安装文件的所在目录里面直接安装

vision@vision-ThinkPad-T440s:~$ cd pkg/petalinux/
vision@vision-ThinkPad-T440s:~/pkg/petalinux$ ls
petalinux-v2016.4-final-installer1.run
vision@vision-ThinkPad-T440s:~/pkg/petalinux$ ./petalinux-v2016.4-final-installer1.run 

漫长等待，至少还没提示权限的问题，一旦出现就只能尝试安装petalinux 15.4了

INFO: Checking installer checksum...
INFO: Extracting PetaLinux installer...
INFO: Installing PetaLinux...
*********************************************
WARNING: You haven't specified the installation location.
*********************************************
*********************************************
WARNING: By default, it will be installed in your working directory: /home/vision/pkg/petalinux
*********************************************
Please input "y" to proceed the installation, exit otherwise:y
INFO: Checking PetaLinux installer integrity...
出现这个提示，吓得半死，继续等。。。。。。。

*********************************************
WARNING: PetaLinux installation directory: /home/vision/pkg/petalinux/. is not empty!
*********************************************
Please input "y" to continue to install PetaLinux in that directory?[n]y

安装究竟还有多少这个东西，小白表示按个软件提心吊胆的，之前有安装petalinux15.4成功过，不知道16.4行不行，如果还是失败就直接安装15.4，太心累了。

LICENSE AGREEMENTS

PetaLinux SDK contains software from a number of sources.  Please review
the following licenses and indicate your acceptance of each to continue.

You do not have to accept the licenses, however if you do not then you may
not use PetaLinux SDK.

Use PgUp/PgDn to navigate the license viewer, and press 'q' to close

Press Enter to display the license agreements
Do you accept Xilinx End User License Agreement? [y/N] > y
Do you accept Webtalk Terms and Conditions? [y/N] > y
Do you accept Third Party End User License Agreement? [y/N] > y
INFO: Checking installation environment requirements...
INFO: Checking free disk space
INFO: Checking installed tools
INFO: Checking installed development libraries
INFO: Checking network and other services
WARNING: No tftp server found - please refer to "PetaLinux SDK Installation Guide" for its impact and solution
INFO: Installing PetaLinux SDK to "/home/vision/pkg/petalinux/."

三个y很容易按多了个q，前路慢慢谨慎谨慎

INFO: Installing PetaLinux zynqMP Yocto SDK to "/home/vision/pkg/petalinux/./components/yocto/source/aarch64"...
PetaLinux Extensible SDK installer version 2016.4
=================================================
You are about to install the SDK to "/home/vision/pkg/petalinux/components/yocto/source/aarch64". Proceed[Y/n]? Y
Extracting SDK...............................done
Setting it up...
Extracting buildtools...
done
SDK has been successfully set up and is ready to be used.
Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.
 $ . /home/vision/pkg/petalinux/components/yocto/source/aarch64/environment-setup-aarch64-xilinx-linux
INFO: PetaLinux Yocto SDK for zynqMP has been successfully installed.
INFO: Installing PetaLinux zynq Yocto SDK to "/home/vision/pkg/petalinux/./components/yocto/source/arm"...
PetaLinux Extensible SDK installer version 2016.4
=================================================
You are about to install the SDK to "/home/vision/pkg/petalinux/components/yocto/source/arm". Proceed[Y/n]? Y
Extracting SDK...........................done
Setting it up...
Extracting buildtools...
done
SDK has been successfully set up and is ready to be used.
Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.
 $ . /home/vision/pkg/petalinux/components/yocto/source/arm/environment-setup-cortexa9hf-neon-xilinx-linux-gnueabi
INFO: PetaLinux Yocto SDK for zynq has been successfully installed.
INFO: Installing PetaLinux microblaze (Full) Yocto SDK to "/home/vision/pkg/petalinux/./components/yocto/source/microblaze_full"...
PetaLinux Extensible SDK installer version 2016.4
=================================================
You are about to install the SDK to "/home/vision/pkg/petalinux/components/yocto/source/microblaze_full". Proceed[Y/n]? Y
Extracting SDK...........................done
Setting it up...
Extracting buildtools...
done
SDK has been successfully set up and is ready to be used.
Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.
 $ . /home/vision/pkg/petalinux/components/yocto/source/microblaze_full/environment-setup-microblazeel-v10.0-bs-cmp-mh-div-xilinx-linux
INFO: Installing PetaLinux microblaze (Lite) Yocto SDK to "/home/vision/pkg/petalinux/./components/yocto/source/microblaze_lite"...
PetaLinux Extensible SDK installer version 2016.4
=================================================
You are about to install the SDK to "/home/vision/pkg/petalinux/components/yocto/source/microblaze_lite". Proceed[Y/n]? Y
Extracting SDK...........................done
Setting it up...
Extracting buildtools...
done
SDK has been successfully set up and is ready to be used.
Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.
 $ . /home/vision/pkg/petalinux/components/yocto/source/microblaze_lite/environment-setup-microblazeel-v10.0-bs-cmp-ml-xilinx-linux
INFO: PetaLinux Yocto SDK for microblaze has been successfully installed.
INFO: PetaLinux SDK has been installed to /home/vision/pkg/petalinux/.

真心不易，接下来就是安装tftproot了

vision@vision-ThinkPad-T440s:~/pkg/petalinux$ sudo apt-get install tftpd tftp openbsd-inetd

sudo gedit /etc/inetd .conf
增加
tftp        dgram    udp    wait    nobody    /usr/sbin/tcpd    /usr/sbin/in .tftpd /tftpboot
mkdir  /tftpboot
chmod  777  /tftpboot
/etc/init .d /openbsd-inetd  restart
netstat -an | more | grep udp
vision@vision-ThinkPad-T440s:~/pkg/petalinux$ netstat -an | more | grep udp
udp        0      0 0.0.0.0:40050           0.0.0.0:*                          
udp        0      0 0.0.0.0:5353            0.0.0.0:*                          
udp        0      0 127.0.1.1:53            0.0.0.0:*                          
udp        0      0 0.0.0.0:68              0.0.0.0:*                          
udp        0      0 0.0.0.0:69              0.0.0.0:*  成功                       
udp        0      0 0.0.0.0:631             0.0.0.0:*                          
udp6       0      0 :::5353                 :::*                               
udp6       0      0 :::57989                :::*
vision@vision-ThinkPad-T440s:~/pkg/petalinux$ source settings.sh
PetaLinux environment set to '/home/vision/pkg/petalinux'
WARNING: /bin/sh is not bash!
bash is PetaLinux recommended shell. Please set your default shell to bash.
INFO: Checking free disk space
INFO: Checking installed tools
INFO: Checking installed development libraries
INFO: Checking network and other services
shell 没有更改成bash
vision@vision-ThinkPad-T440s:~/pkg/petalinux$ sudo dpkg-reconfigure dash 选择no
update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode
重新测试
vision@vision-ThinkPad-T440s:~/work$ source ../pkg/petalinux/settings.sh
PetaLinux environment set to '/home/vision/pkg/petalinux'
INFO: Checking free disk space
INFO: Checking installed tools
INFO: Checking installed development libraries
INFO: Checking network and other services

至此安装成功

付上官网链接里面的bash和dash的转换

ls -al /bin/sh 

sudo rm /bin/sh
ln -s /bin/bash /bin/sh

ls -al /bin/sh

should now point to bash

to run dash again 

sudo rm /bin/sh
 ln -s /bin/dash /bin/sh



边城1987
关注
专栏目录
UBUNTU16.4下安装petalinux16.4
jiongxiaomeier的博客
01-26 2102
参考ug1144手册的安装步骤，会遇到一系列的问题。以下是结合UG1144和自己安装的总结。 一、root模式下安装依赖文件（切记联网，手动安装很麻烦） #apt-get update #apt-get install gawk:i386         .......同上install 其余依赖文件，此处省略其他要安装的依赖文件 否则将出现以下错误 ERROR: Yo
FPGA学习7-安装petalinux遇到问题
udddhu的博客
05-04 1924
1、安装成功，启动petalinux-config --get-hw-description ../hardware/ 命令，报出“failed to menu config project component..." 解决方法：把Ubuntu放大界面，全屏，问题解决。 2、安装petalinux时，拷贝petalinux-v2020.1-final-installer.run至 ubuntu 系统下，设置权限 sudo -smkdir -p /opt/pkg/petalinuxchgrp ale..
安装 Petalinux
最新发布
qq_43441284的博客
10-08 1022
ubuntu 22.04: 运行内存8G 存储空间500G。
ubuntu中安装petalinux提示ERROR: Failed to install Yocto SDK for aarch64的处理方式之一
wxchbhd的博客
03-13 4785
问题如下： 。。。。 INFO: Installing PetaLinux... ********************************************* WARNING: PetaLinux installation directory: /opt/pkg/petalinux/. is not empty! *********************************...
Petalinux2019.1的安装问题
dragon_cdut的博客
03-24 2471
Petalinux2019.1的安装与之前大体类似，但是有几个小坑，再次记录一下。 安装依赖 ug1144中提供了快速安装依赖的脚本， sudo apt-get install -y gcc git make net-tools libncurses5-dev tftpd zlib1g-dev libssl-dev flex bison libselinux1 gnupg wget dif...
petalinux安装过程中遇到的坑【petalinux2018.3基于Ubuntu16.04.4（64-bit）】
weixin_42501133的博客
04-28 6722
目录引言1、使用的账户问题2、shell类型3、安装依赖包两个问题4、安装目录5、No tftp警告6、安装失败后的处理 引言   前段时间在虚拟机Linux上装了petalinux2018.3，现在Ubuntu都到18.04.4了，可能因为很多依赖包都有更新，按照UG1144去做的过程中碰到了很多问题。   首先成功过程图如下：   1、使用的账户问题   UG1144写到：装依赖包要roo...
安装petalinux工具
ScilogyHunter的博客
05-23 737
petalinux 并不是一个特殊 Linux 内核，而是一套开发环境配置的工具，降低 uboot、内核、 根文件系统的配置的工作量，可以从 Vivado 的导出硬件信息自动完成相关软件的配置。petalinux 是赛灵思基于 buildroot 工具链为自家处理器方便适配 Linux 定制的工具集。在 Xilinx 官方文档 UG1144 中有详细安装方法，如果本教程安装失败，请参考 Xilinx 的 ug1144 文档进行安装。
PetaLinux 2019 安装指南1
08-03
在本文中，我们将详细介绍如何在 Ubuntu 16.04 或 18.04 上安装 PetaLinux 2019.1。 首先，确保你的系统满足 PetaLinux 的前提条件。根据 Xilinx 的官方文档 ug1144，PetaLinux 需要在 Ubuntu 16.04 或 18.04 操作...
petalinux的安装.pdf
10-18
PetaLinux在2015.4版本中要求在Ubuntu系统上进行安装，而Ubuntu Kylin 14.04.2 desktop amd64是一个推荐的操作系统环境。另外，为了确保PetaLinux的兼容性和稳定性，还需要安装Vivado 2015.4版本，它是Xilinx用于...
petalinux 安装手册 Ubuntu
01-11
在Petalinux安装过程中，可能会遇到一些依赖性问题，例如缺失的动态库或者系统路径问题。比如，如果系统提示找不到libncursesw.so.5动态库，可以使用sudo apt-get install lib32ncursesw5命令来解决。类似地，若出现...
Petalinux安装
m0_37779725的博客
04-26 4424
petalinux2018.2安装，petalinux2018.2安装2021.2
petalinux安装问题总结
Macade的博客
05-20 4085
1，安装所需要的库 apt install build-essential vim tofrodos 出现 解决：1、 sudo rm /var/cache/apt/archives/lock 2、sudo rm /var/lib/dpkg/lock 3、sudo dpkg --configure -a 4、sudo a...
Linux 文件运行Permission denied
qq_35608277的博客
10-09 651
解决 chmod +x ./test.sh
petalinux 17.2安装过程中的问题
ma_cheng_yuan的博客
07-27 4918
最近用到ZYNQ    需要安装petalinux 但是安装过程中还是遇到了问题
Linux的Ubuntu2020.04安装petalinux2021.2遇见问题
weixin_42640149的博客
06-19 477
一、解决方法：输入 chmod 777 petalinux-v2021.2-final-installer.run 命令予以最高权限。二、输入： ./petalinux-v2021.2-final-installer.run --dir /xxxx(安装的文件夹)1.petalinux与Ubuntu版本得兼容（自行百度）三、跟随指令进行安装即可。
ubuntu 16.04 安装 Petalinux2019.1
sea
02-05 1224
遇到的问题： 安装依赖 ug1144中提供了快速安装依赖的脚本， sudo apt-get install -y gcc git make net-tools libncurses5-dev tftpd zlib1g-dev libssl-dev flex bison libselinux1 gnupg wget diffstat chrpath socat xterm autoconf libtool tar unzip texinfo zlib1g-dev gcc-mult
Petalinux建立工程时出现WARNING: /bin/sh is not bash!的解决方法
qq_42870876的博客
03-11 4047
出现（WARNING: /bin/sh is not bash!)如何解决 在运行命令： @ubuntu$:source /opt/pkg/petalinux/settings.sh` ` 时候出现以下内容： PetaLinux environment set to '/opt/pkg/petalinux' WARNING: /bin/sh is not bash! bash is PetaLinux recommended shell. Please set your default shell to
ZCU104搭建Ubuntu桌面系统-1安装Petalinux
weixin_30646315的博客
07-04 1856
参考教程： https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841948/Zynq+UltraScalePlus+MPSoC+-+Ubuntu+Desktop+Step+by+Step+Guide 1. 准备工作： 硬件材料： Xilinx ZCU104套件 一套 16G的SD卡 一个 网线 一根 Micro USB 线 ...
petalinux工具安装指令
09-13
Petalinux是Xilinx针对Zynq和Alveo系列FPGA的嵌入式Linux开发环境。要安装Petalinux工具，首先你需要访问Xilinx的开发者区网站下载最新的版本。通常，你可以通过命令行按照以下步骤操作： 1. **获取安装包**： ```bash git clone https://github.com/Xilinx/Petalinux ``` 2. **创建工作目录**： ```bash mkdir petalinux_workspace cd petalinux_workspace ``` 3. **解压并进入Petalinux发行版文件夹**： ```bash tar -xvf petalinux-<version>.tgz cd petalinux-<version> ``` 4. **运行安装脚本**： ```bash source setup.sh ``` 这将引导你完成安装过程，包括选择安装选项、设置环境变量等。 5. **配置及安装**： ```bash xsct ``` 进入xsct shell，然后按照提示配置并安装所需的工具和依赖。 6. **验证安装**： 可以通过运行`petalinux-info`命令来确认是否安装成功。 注意，具体的版本和某些高级功能可能会有额外的安装步骤。如果你遇到问题，Xilinx的官方文档通常会提供详细的帮助。
评论 4
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值