Modelsim仿真，“Fatal: (SIGFPE) Floating point exception”问题

问题描述

仿真PLL，run vsim出错，错误信息：
** Fatal: (SIGFPE) Floating point exception.
Time: 0 ps Iteration: 1 Process: /harness/u_ip_falcon_pas_oh_s4x400h_wrapper/PLLE3_BASE_inst/PLLE3_ADV_inst/CLOCK_PERIOD_UPDATE_P File: /EDA_SW_64/vivado/2018.2/Vivado/2018.2/data/vhdl/src/unisims/primitive/PLLE3_ADV.vhd
Fatal error in Process CLOCK_PERIOD_UPDATE_P at /EDA_SW_64/vivado/2018.2/Vivado/2018.2/data/vhdl/src/unisims/primitive/PLLE3_ADV.vhd line 1916

HDL call sequence:
Stopped at /EDA_SW_64/vivado/2018.2/Vivado/2018.2/data/vhdl/src/unisims/primitive/PLLE3_ADV.vhd 1916 Process CLOCK_PERIOD_UPDATE_P

问题原因

仿真命令：
vsim -t 100ps harness novas -keepstdout -c -do …/scripts/run_vsim.d
中将仿真的时间精度设置为100ps，而PLLE3_ADV.vhd的仿真要求最大的时间精度为1ps，因此在精度100ps的仿真下会报错

解决方案

将仿真精度设置为1ps或者更低