25.虚拟鼠标实验

实验现象：

  按键模拟鼠标向左移动，向右移动，点击左键等操作。

理论学习：

  学会Mouse.move和Mouse.click的使用。

  详情查看：http://arduino.cc/en/Tutorial/ButtonMouseControl 

程序代码：

#define KEY1 2  //左移
#define KEY2 3  //右移
#define KEY3 4  //左键
 
int Flag_up = 1;
 
void setup()
{
  pinMode(KEY1, INPUT_PULLUP);
  pinMode(KEY2, INPUT_PULLUP);
  pinMode(KEY3, INPUT_PULLUP);
  Mouse.begin();
}
  
void loop()
{
  if( ScanKey(1) == 1)      //左移
  {
    Mouse.move(-40, 0);     //左移40
  }
  else if(ScanKey(1) == 2)  //右移
  {
    Mouse.move(40, 0); 
  }
  else if(ScanKey(1) == 3)  //左键按下
  {
    Mouse.click(MOUSE_LEFT);   
  }
}
 
unsigned char ScanKey(int mode)     //按键扫描程序，返回键值
{
  if(mode)              //mode = 1时候，该代码支持长按。mode = 0时候，不支持长按
  {
    Flag_up = 1;
  }
   
  if(Flag_up  && (digitalRead(KEY1) == LOW || digitalRead(KEY2) == LOW || digitalRead(KEY3) == LOW) )       //当Flag_up = 1并且按键按下时
  {
    Flag_up = 0;            //清空Flag_up
    delay(30);              //延时去抖动
    if(digitalRead(KEY1) == LOW)    //按键按下
    {
      return 1;             //返回键值1
    }
    if(digitalRead(KEY2) == LOW)    //按键按下
    {
      return 2;             //返回键值2
    }
    if(digitalRead(KEY3) == LOW)    //按键按下
    {
      return 3;             //返回键值3
    }
  }
  if(digitalRead(KEY1) == HIGH && digitalRead(KEY2) == HIGH && digitalRead(KEY3) == HIGH)   //按键松开时候
  {
    Flag_up = 1;            //置位Flag_up
  }
  return 0;             //返回键值0
}