超级会员免费看
ULPI是一种Link到PHY的8或12信号接口，旨在为连接基于UTMI+规范的外部收发器提供更低的引脚数选项。通过将相对静态的UTMI+信号通过寄存器访问，并提供一个双向数据总线来传输USB数据和访问ULPI收发器的寄存器数据，从而实现引脚数量的减少。
UTMI+ Low Pin Interface (ULPI), a generic low pin interface (LPI) between a Link and a PHY.
1. general
ULPI defines a PHY to Link interface of 8 or 12 signals that allows a lower pin count option for connecting to
an external transceiver that may be based on the UTMI+ specification. The pin count reduction is achieved
by having relatively static UTMI+ signals be accessed through registers and by providing a bi-directional
data bus that carries USB data and provides a means of accessing register data on the ULPI transceiver.
2. signal
USB and Misce
订阅专栏 解锁全文
扫一扫
8985
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
