超级会员免费看
UTMI+标准提供了不同级别的技术支持，以适应设备的复杂性需求。级别0兼容UTMI，级别1支持USB OTG双角色设备的高速和全速流量，级别2增加了对低速流量的支持，级别3支持使用USB 2.0全速集线器。每个级别都有特定的信号和功能，如AValid、BValid和SessEnd等，用于USB 2.0外设、主机控制器和On-The-Go设备的设计。
1. UTMI+
The UTMI+ standard contains progressive levels of technology support because the complexity
requirements for devices can vary widely. For example, in OTG devices, the complexity needed for the
host controller block is directly dependent on the targeted peripheral list. The different UTMI+ levels
allow the designer to implement an ASIC with the required complexity level without having to design in
unused logic.
The levels provide a layered support structure:
• Level 0 is fully compatible with UTMI.
• Level 1 adds support for USB OTG dual-role devices that generate high-speed (HS) and
full-speed (FS) traffic.
• Level 2 adds support for generating low-speed (LS) traffic towards LS
订阅专栏 解锁全文
扫一扫
1559
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
