中兴UPF开局配置

• UPF配置

  • 基础配置

    • 1、network instance配置（先配置网络标识，然后配置网络实例：即网络实例VRF）

      • 1、创建network instance网络标识 ADD NETWORKINSTANCE

        • networkinstance=N3 等 ADD NETWORKINSTANCE:NETWORKINSTANCE="N3" ADD NETWORKINSTANCE:NETWORKINSTANCE="N4"

      • 2、新增网络实例，标识网络实例关联VRF ADD VPNINSTANCE

        • N3/N4/N6等网络实例及VPN ADD VPNINSTANCE:NETWORKINSTANCE="N4",VPNID=11,VPNIDV6=11,VRFNAME="SIG",VRFNAMEV6="SIG" ADD VPNINSTANCE:NETWORKINSTANCE="N3",VPNID=13,VPNIDV6=13,VRFNAME="RAN",VRFNAMEV6="RAN"

    • 2、对接SMF配置（配置UPF节点以及UP、CP关联地址）

      • 1、配置UPF节点 ADD UPNODE

        • ADD UPNODE:UPNAME="UPF100",GNAME="default",MGRIPTYPE="IPV4",MGRIPV4VAL="255.255.97.89",MGRPORT="7778" 端口7778，IP地址为UPF网管浮动地址

      • 2、设置UP关联地址 SET UPAssocAddr

        • SET UPASSOCADDR:UPNAME="UPF100",IPVERSION="IPV4",IPV4ADDR="255.255.97.208",NETWORKINSTANCE="N4" 地址为UPF的N4规划地址

      • 3、新增CP关联地址 ADD CPAssocAddr

        • ADD CPASSOCADDR:CPID="1",CPNAME="HK-SMF900-C-ZX",IPVERSION="IPV4",IPV4ADDR="255.255.97.139",NETWORKINSTANCE="N4",CPFUNC="SGW_C"&"PGW_C"&"SMF",BROKENPOLICY="GLOBAL" 地址为SMF的N4地址

  • 接口配置

    • 1、N3接口配置 ADD LOGICIP

      • ADD LOGICIP:LOGICIPNAME="N3",INTTYPE="ACCESS",NETWORKINSTANCE="N3",IPVERSION="IPV4",IPV4ADDR="255.255.96.4",STATUS="NORMAL",PUBLISHBGPROUTE="ON",UPINTERFACETYPE="N3" 名称对应N3口的networkinstance，接入类型为ACCESS

    • 2、N9接口配置 ADD LOGICIP

      • ADD LOGICIP:LOGICIPNAME="N9",INTTYPE="ACCESS",NETWORKINSTANCE="N9",IPVERSION="IPV4",IPV4ADDR="255.255.96.5",STATUS="NORMAL",PUBLISHBGPROUTE="ON",UPINTERFACETYPE="N3"

    • 3、PFU traffic配置 ADD PFUTRAFFIC

      • ADD PFUTRAFFIC:SHELF="2",SLOT="0",SUBSLOT="1",VPNID="13",RECVIPV4="192.168.22.1",RECVIPV6="fd00:a0a:22::1",METRIC="101" 用于添加PFU流量规划配置，包括配置PFU位置对应的IP地址和metric值

  • 地址管理配置

    • 1、APNDNN配置 ADD APNDNN

      • ADD APNDNN:APNDNN="ims",REAL="true",REALAPNDNN="ims",MAXPDPNUM="4294967295"

    • 2、地址池配置 ADD IPPOOL

      • ADD IPPOOL:IPPOOLNAME="smf-HKzx-ims-v4",PRIORITY="1",IPPOOLATTR="LOCAL",NEEDDYNCROUTE="PUBLISH",IPTYPE="IPV4",HOLDTIME="0",QUARANTINETIME="0",NFTRANSFERFLAG="DISABLE",NFTRANSFERINDEX="0",ULCLPOOLFLAG="DISABLE",IPBINDTYPE="NORMAL"

    • 3、地址池与APNDNN关联配置 ADD IPPOOLAPNDNNINFO

      • ADD IPPOOLAPNDNNINFO:IPPOOLNAME="smf-HKzx-ims-v4",APNDNN="ims" ADD IPPOOLAPNDNNINFO:IPPOOLNAME="smf-HKzx-3gnet-v4",APNDNN="3gnet"

    • 4、地址段配置 ADD IPseginfo

      • ADD IPSEGINFO:SEGMENTNAME="smf-HKzx-ims-v4-1",STARTIP="255.255.96.97",ENDIP="255.255.96.126",MASK="255.255.255.224",NETWORKINSTANCE="N6",UPNAME="UPF100",IPPOOLNAME="smf-HKzx-ims-v4",AUXIUPFMODE="SLAVE",ULNFTRANSSWTICH="DISABLE",EVENLYSPLITSWITCH="DISABLE"

  • 4、DPI规则配置

    • 1、用量使用情况报告规则URRMAP配置 ADD URRMAP

      • ADD URRMAP:URRID="10000",TYPE="OFFLINECHARGESERVICE",SERVICEID="3000000000",RATINGGROUP="3000000000",CHARGINGTYPE="INHERIT" 离线计费

      • ADD URRMAP:URRID="30000",TYPE="N40ONLINECHARGESERVICE",SERVICEID="0",RATINGGROUP="3000000000",CHARGINGTYPE="INHERIT" 在线计费

    • 2、新增业务控制策略 ADD TRAFFICCONTROLDATA

      • ADD TRAFFICCONTROLDATA:NAME="default",ACTION="FORWARD",POLICYTYPE="NONE",ADCURRID="0",ERRREDIRECT="DISABLE",DNSERRREDIRECT="DISABLE"

    • 3、新增QOS策略 ADD QOSDATA

      • ADD QOSDATA:NAME="default",GATE="ENABLE",ULDSCPSWITCH="DISABLE",DLDSCPSWITCH="DISABLE",ULMBRSWITCH="DISABLE",ULMBR="1",DLMBRSWITCH="DISABLE",DLMBR="1",ULGBRSWITCH="DISABLE",ULGBR="0",DLGBRSWITCH="DISABLE",DLGBR="0",CIRPIRSWITCH="DISABLE",ULCIR="4294967295",ULPIR="4294967295",DLCIR="4294967295",DLPIR="4294967295",YELLOWACTION="DROP",FPI="0" 门控选通过

    • 4、新增计费策略 ADD ChargingDATA

      • ADD CHARGINGDATA:NAME="cc_3000000000",OFFLINEURRID="10000",ONLINEURRID="0",N40ONLINEURRID="30000",N40ONLINESIURRID="0",FREE="false",NEWPACKETPOLICY="PASS",NEWPACKETQUOTA="2000000",OUTPUTCONBILL="ENABLE",N40OFFLINEURRID="0",N40OFFLINESIURRID="0",CHARGINGTYPE="INHERIT",NEWPACKETTHRESHOLD="51200",TIMETYPE="Normal",TIMESLOT="5" 业务URRID对应离线计费10000，N40在线计费费率组URRID对应在线计费30000

    • 5、L34策略

      • 1、新增三四层过滤规则 ADD L34FILTER

        • ADD L34FILTER:FILTERNAME="l34f",IPTYPE="IPV4",IPV4SERVERIP="0.0.0.0",IPV4SERVERIPMASK="0",IPV6SERVERIP="::",IPV6SERVERIPMASK="0",PROTOCOL="ANY",SERVERPORTSTART="0",SERVERPORTEND="0",IPV4MSIP="0.0.0.0",IPV4MSIPMASK="0",IPV6MSIP="::",IPV6MSIPMASK="0",MSPORTSTART="0",MSPORTEND="0"

      • 2、新增三四层顾虑规则组 ADD L34FILTERGROUP

    • 6、l7策略

      • 1、新增七层过滤规则 ADD L7FILTER

      • 2、新增七层过滤规则 ADD L7FILTERGROUP

    • 7、新增流过滤器规则 ADD FLOWFILTER

      • ADD FLOWFILTER:FLOWFILTERNAME="l34_ff_3000000000",L34FILTERGROUPNAME="l34_g_3000000000",L7FILTERGROUPNAME="l7_g_3000000000",PMPATH="DEFAULTPATH",APPFEATURE="NOTFREE" L34过滤规则组名和L7过滤规则组名

    • 8、新增规则 ADD RULE

      • ADD RULE:NAME="3000000000",FLOWFILTER="flow-l34",QOSDATA="default",CHARGINGDATA="cc_3000000000",TRAFFICCONTROLDATA="default",MONITORURRID="0",PRECEDENCE="4294967295",TETHERINGFLAG="DEFAULT"

    • 9、新增用户模板 ADD UserProfile

      • ADD USERPROFILE:NAME="3gnet",USERPROFILETYPE="LOCAL_RULE",PRECEDENCE="4294967295",DPIUPCONFIG="DPIConfig_NOurlrerecog",TETHERINGFLAG="DEFAULT",ULCLFLAG="NO" 本地规则

    • 10、新增规则绑定关系 ADD RuleBindUP

      • ADD RULEBINDUP:UPNAME="3gnet",RULENAME="3000000000",PRECEDENCE="4294967295" ADD RULEBINDUP:UPNAME="ims",RULENAME="3000000001",PRECEDENCE="4294967295" 和rulename关联，即第8规则