远程开启或唤醒休眠的计算机

微软的远程桌面是很好用的一个工具。但是如果被远程的电脑关机或者处于休眠状态,这时就无法直接远程登录了。需要先跑过去开机,再开启远程桌面。所以在想,有没有直接可以远程开启一台电脑,或者远程唤醒一台电脑的方法呢?

通过百度,发现一篇文章,对远程唤醒做了详细的介绍。按照其步骤来做,成功实现了远程唤醒和开机功能。

文章地址链接:http://wenku.baidu.com/link?url=AiiEn9VI7PHsqAR61sznfpMcbX6wdN9omynDyEU1Y37tqD5WwwTD9oOwtn7nW3jFGQyLGgdB0BkTpOIYoBw424BIXxdzBvYWLOea8weT5D_

我自己的电脑在10.1.30.XX网段, 需远程的电脑在10.1.20.XX 网段。只需简单的两步就可以完成远程唤醒。

1、被远程电脑上,进入BIOS,开启 Wake on PCI Card 和 Wake up on LAN。(注:不同BIOS显示可能不一样)

2、自己的电脑上,下载PCnet Magic Packet Utility等类似工具,网上汉化绿色的都有,操作也不难。


下面以我的远程联想电脑为例:

进入BIOS,在POWER选项卡里找到了 Automatic Power On选项,进入之后,将Onboard lan wake up 和 PCI Slots Wake up 开启(设置为Enabled)


在自己的电脑上,打开PCnet Magic Packet Utility 这个软件,填入IP地址和物理地址即可。这个软件的更多功能,还有待研究!


PCnet Magic Packet(TM) Utility 1.00, September 9, 1997 ------------------------------------------------------- INTRODUCTION ~~~~~~~~~~~~ This is the release notice for the PCnet Magic Packet(TM) Utility Revision 1.00 software. All files are in DOS FAT format. AMD抯 Magic Packet utility is a convenient tool for system administrators for remotely powering up groups of workstations at preset times. The utility provides the following two basic functions: ?Creates a table of IP and hardware addresses for all hosts in a local area network. ?Associates each group of workstations/hosts to an alarm clock, and power on each group when the time comes. This utility supports the Microsoft Windows NT 4.0 and Windows 95 operating system environments. CONTENTS ~~~~~~~~~~~~~ The Rev 1.00 files are distributed as follows: Directory 1 - release.txt : the file you are viewing currently. - magpac.exe - magpac.hlp - conspawn.exe - magpac.cnt Directory 2 - msvcrt.dll - mfc42.dll - magpacbg.bmp Documents - mpuser.doc : Microsoft Word 6.0 document that describes the usage of the utility - testrept.doc : Test Report in Microsoft Word 6.0 format. DOCUMENTATION ~~~~~~~~~~~~~ This release contains version 1.0 of AMD's PCnet Magic Packet Utility User's Guide (MPuser.doc) and a test report (TestRept.Doc) describing the scope and content of tests that were conducted with this release of the utility. These documents are available in the distribution media. INSTALLATION INSTRUCTIONS ~~~~~~~~~~~~~~~~~~~~~~~~~ These instructions apply for both Windows 95 and Windows NT 4.0. 1. Open a DOS window 2. Create a directory such as c:\mputil 3. Copy all files contained in Directory 1 to the c:\mputil directory 4. For Windows 95, change to the windows system directory (default is c:\windows) directory For Windows NT, change to the Windows NT system32 sub-directory (default is c:\winnt\system32) Copy the *.dll files in Direc
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值