英特尔确认Alder Lake CPU的UEFI BIOS源代码泄漏

据媒体10月9日报道,英特尔已经证实,Alder Lake cpu的UEFI BIOS源代码泄露。Alder Lake是第12代英特尔酷睿处理器,于2021年11月发布。上周五,Twitter用户freak发布了据称是Alder Lake的UEFI固件源代码的链接,该链接指向GitHub存储库ICE_TEA_BIOS,其中包含5.97 GB的文件、源代码、私钥、更改日志和编译工具。文件的最新时间戳为22年9月30日,目前尚不清楚源代码是在网络攻击期间被盗还是被内部人员泄露。不过,英特尔已确认源代码是真实的,是它的专有UEFI代码。

这是Intel的第12代CPU对应的UEFI BIOS固件源码,有需要源码的可以联系本人。

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
代码部分来自Google的重建IBMPC BIOS项目(https://sites.google.com/site/pcdosretro/ibmpcbios),其中的BIOS镜像(*.rom)可用于各种IBM PC模拟器,可按情况使用。源代码可以用masm编译,站内英文说明文件如下: IBM PC BIOS source code reconstruction This is a reconstruction of the IBM PC, PC XT, PC AT and PC XT 286 BIOS source code using scanning and transcription of the BIOS listings found in the IBM Technical Reference manuals. This historically relevant source code is presented here for software preservation. The following BIOS source code has been reconstructed: IBM PC version 1 04/21/81 IBM PC version 2 10/19/81 IBM PC version 3 10/27/82 IBM PC XT version 1 11/08/82 (also used on the Portable PC) IBM PC XT version 2 01/10/86 IBM PC XT version 3 05/09/86 IBM PC AT version 1 01/10/84 IBM PC AT version 2 06/10/85 IBM PC AT version 3 11/15/85 (used on the PC AT models 319 and 339) IBM PC XT 286 04/21/86 Notes: • All 3 versions of the IBM PC BIOS and the first version of the IBM PC XT BIOS were built using Intel ASM86 on an Intel development system. In each case the BIOS source code is a single large file and the BIOS code is 8KB which resides at F000:E000 • The IBM PC AT version 1 BIOS was built using IBM MASM 1.0 on DOS. This is the first IBM BIOS which uses multiple source files. Since IBM MASM 1.0 did not support the 80286 there is a macro file (IAPX286.MAC) which is used to generate the necessary opcodes. This is also the first BIOS to be split into two parts: the main BIOS code resides at F000:0000 and the compatibility section (ORGS.ASM) resides at F000:E000. An additional file FILL.ASM has been added to define the area between the end of the main BIOS code and the compatibility section to allow the BIOS to be linked properly. It is currently unknown how this was originally handled. • The IBM PC AT version 2 and 3 BIOS and the IBM PC XT 286 BIOS were built using IBM MASM 2.0 on DOS. These are similar to the PC AT version 1 BIOS but there are fewer source files as some files were combined and a bit of cleanup was done. IAPX286.INC is used to generate the protected-mode 80286 opcodes which IBM MASM 2.0 did not support. FILL.ASM serves the same purpose as it does for the PC AT version 1 BIOS though in each case the file is specific to the particular BIOS being built. • The IBM PC XT version 2 and 3 BIOS were built using IBM MASM 2.0 on DOS. The later PC XT BIOS code was restructured to be similar to the PC AT BIOS code so there are multiple source files. Like the PC AT BIOS the code is split into two parts though the compatibility section is in the file POST.ASM. Again the additional file FILL.ASM is used to define the area between the end of the main BIOS code and the compatibility section. • The following code is present in all versions of the PC AT BIOS and the PC XT 286 BIOS but does not appear in the published listings. It is inferred from the public symbols in ORGS.ASM and code disassembly. It is unknown what purpose this code serves. .XLIST ;;- ORG 0FF5AH ORG 01F5AH HRD PROC FAR CALL DISK_SETUP RET HRD ENDP FLOPPY PROC FAR CALL DSKETTE_SETUP RET FLOPPY ENDP SEEKS_1 PROC FAR CALL SEEK RET SEEKS_1 ENDP TUTOR: JMP K16 .LIST • In all cases the 32KB ROM BASIC code which resides at F6000 is not available as its source code was never published. • Versions of MASM later than 4.0 cannot be used to build the IBM BIOS source code since older constructs and macros are used. More information about functionality changes in the IBM PC BIOS code is listed here: IBM PC BIOS version history

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值