设备驱动中的bus(kernel-4.7)

Linux设备驱动模型中的bus，即可以是物理总线（如PCI、I2C总线）的抽象，也可以是出于设备驱动模型架构需要而定义的虚拟的“platform”总线。一个符合Linux设备驱动模型的device或device_driver必须挂靠在一个bus上，无论这个bus是物理的还是虚拟的。

Linux内核使用bus_type结构体来描述bus，该结构体定义在include/linux/device.h文件中，其内容如下：

/**
 * struct bus_type - The bus type of the device
 *
 * @name:   The name of the bus.
 * @dev_name:   Used for subsystems to enumerate devices like ("foo%u", dev->id).
 * @dev_root:   Default device to use as the parent.
 * @dev_attrs:  Default attributes of the devices on the bus.
 * @bus_groups: Default attributes of the bus.
 * @dev_groups: Default attributes of the devices on the bus.
 * @drv_groups: Default attributes of the device drivers on the bus.
 * @match:  Called, perhaps multiple times, whenever a new device or driver
 *      is added for this bus. It should return a positive value if the
 *      given device can be handled by the given driver and zero
 *      otherwise. It may also return error code if determining that
 *      the driver supports the device is not possible. In case of
 *      -EPROBE_DEFER it will queue the device for deferred probing.
 * @uevent: Called when a device is added, removed, or a few other things
 *      that generate uevents to add the environment variables.
 * @probe:  Called when a new device or driver add to this bus, and callback
 *      the specific driver's probe to initial the matched device.
 * @remove: Called when a device removed from this bus.
 * @shutdown:   Called at shut-down time to quiesce the device.
 *
 * @online: Called to put the device back online (after offlining it).
 * @offline:    Called to put the device offline for hot-removal. May fail.
 *
 * @suspend:    Called when a device on this bus wants to go to sleep mode.
 * @resume: Called to bring a device on this bus out of sleep mode.
 * @pm:     Power management operations of this bus, callback the specific
 *      device driver's pm-ops.
 * @iommu_ops:  IOMMU specific operations for this bus, used to attach IOMMU
 *              driver implementations to a bus and allow the driver to do
 *              bus-specific setup
 * @p:      The private data of the driver core, only the driver core can
 *      touch this.
 * @lock_key:   Lock class key for use by the lock validator
 *
 * A bus is a channel between the processor and one or more devices. For the
 * purposes of the device model, all devices are connected via a bus, even if
 * it is an internal, virtual, "platform" bus. Buses can plug into each other.
 * A USB controller is usually a PCI device, for example. The device model
 * represents the actual connections between buses and the devices they control.
 * A bus is represented by the bus_type structure. It contains the name, the
 * default attributes, the bus' methods, PM operations, and the driver core's
 * private data.
 */
struct bus_type {
    const char      *name;  /*bus的名字*/
    const char      *dev_name;  /*用来遍历bus上的device*/
    struct device       *dev_root;  /