一、Tomcat 安装后本身提供了一个server,端口配置默认是8080,对应目录为:..\Tomcat 6.0\webapps
二、Tomcat 6.0 配置多个端口,其实也就是给Tomcat增加几个server,并设置对应目录。下面以增加两个端口号为例
第一步、修改server.xml[..\Tomcat 6.0\conf]
(1)Tomcat提供的如下:
- <Service name="Catalina">
- <Connector port="8090" maxHttpHeaderSize="8192"
- maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
- enableLookups="false" redirectPort="8443" acceptCount="100"
- connectionTimeout="20000" disableUploadTimeout="true" />
- <Connector port="8009"
- enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
- <Engine name="Catalina" defaultHost="localhost">
- <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
- resourceName="UserDatabase"/>
- <Host name="localhost" appBase="webapps"
- unpackWARs="true" autoDeploy="true"
- xmlValidation="false" xmlNamespaceAware="false">
- </Host>
- </Engine>
- </Service>
(2)新增两个端口号,注意Service name、Engine name、appBase,
当然了,端口号别忘了修改,以免重复。
- <Service name="Catalina1">
- <Connector port="8091" maxHttpHeaderSize="8192"
- maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
- enableLookups="false" redirectPort="8443" acceptCount="100"
- connectionTimeout="20000" disableUploadTimeout="true" />
- <Connector port="8009"
- enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
- <Engine name="Catalina1" defaultHost="localhost">
- <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
- resourceName="UserDatabase"/>
- <Host name="localhost" appBase="webapps1"
- unpackWARs="true" autoDeploy="true"
- xmlValidation="false" xmlNamespaceAware="false">
- </Host>
- </Engine>
- </Service>
- <Service name="Catalina2">
- <Connector port="8092" maxHttpHeaderSize="8192"
- maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
- enableLookups="false" redirectPort="8443" acceptCount="100"
- connectionTimeout="20000" disableUploadTimeout="true" />
- <Connector port="8009"
- enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
- <Engine name="Catalina2" defaultHost="localhost">
- <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
- resourceName="UserDatabase"/>
- <Host name="localhost" appBase="webapps2"<!-- 这个地方很重要,我今天没修改这个,导致webapps下的几个应用都可以用多个端口访问,结果只好将默认的webapps下的应用拷到其他地方,在${tomcat_home}/conf/下创建Catalina2/localhost/,并创建不同的xml文件将docBase指向应用所在的路径-->
- unpackWARs="true" autoDeploy="true"
- xmlValidation="false" xmlNamespaceAware="false">
- </Host>
- </Engine>
- </Service>
第二步、创建相应的部署目录
..\Tomcat 6.0\webapps1
..\Tomcat 6.0\webapps2
同时可以将Tomcat 6.0\webapps下的有用的复制到新建的部署目录
第三步、创建配置文件目录和配置文件
..\Tomcat 6.0\conf\Catalina1\localhost
..\Tomcat 6.0\conf\Catalina2\localhost
host-manager.xml
manager.xml
配置文件的配置可参照..\Tomcat 6.0\conf\Catalina\localhost下的,只需要修改一下对应目录即可
大概的配置步骤就是这些,现在可以把不同的war包放在不同的位置来访问了
以上配置方法同样适合Tomcat 5.5