4.21作业ospf

AR1

<Huawei>
May  8 2024 14:23:39-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>sys    
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sys    
[Huawei]sysname R1
[R1]in    
[R1]info-center
[R1]interface g 0/0/0
[R1-GigabitEthernet0/0/0]ip ad    
[R1-GigabitEthernet0/0/0]ip address 192.168.1.129 26
May  8 2024 14:24:31-08:00 R1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R1-GigabitEthernet0/0/0]q
[R1]
[R1]
[R1]os    
[R1]ospf 1 r    
[R1]ospf 1 router-id 192.168.1.129
[R1-ospf-1]
[R1-ospf-1]ar    
[R1-ospf-1]area 0
[R1-ospf-1-area-0.0.0.0]ne    
[R1-ospf-1-area-0.0.0.0]network 192.168.1.128 0.0.0.63
[R1-ospf-1-area-0.0.0.0]
[R1-ospf-1-area-0.0.0.0]
May  8 2024 14:28:12-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.1.168.192, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 

[R1-ospf-1-area-0.0.0.0]
May  8 2024 14:28:19-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.1.168.192, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
) 
[R1-ospf-1-area-0.0.0.0]
May  8 2024 14:28:19-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.1.168.192, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange) 
[R1-ospf-1-area-0.0.0.0]
May  8 2024 14:28:19-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.1.168.192, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding) 
[R1-ospf-1-area-0.0.0.0]
May  8 2024 14:28:20-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.1.168.192, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
 
[R1-ospf-1-area-0.0.0.0]
May  8 2024 14:29:49-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 

[R1-ospf-1-area-0.0.0.0]
May  8 2024 14:29:53-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
) 
[R1-ospf-1-area-0.0.0.0]
May  8 2024 14:29:53-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange) 
[R1-ospf-1-area-0.0.0.0]
May  8 2024 14:29:53-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Nei
ghborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Lo
ading) 
[R1-ospf-1-area-0.0.0.0]
May  8 2024 14:29:53-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Nei
ghborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full
) 
[R1-ospf-1-area-0.0.0.0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R1>sys
Enter system view, return user view with Ctrl+Z.
[R1]
[R1]
[R1]dis    
[R1]display ip r    
[R1]display ip rd-filter
[R1]display ip routing-table p    
[R1]display ip routing-table protocol os    
[R1]display ip routing-table protocol ospf 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Public routing table : OSPF
         Destinations : 3        Routes : 3        

OSPF routing table status : <Active>
         Destinations : 3        Routes : 3

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

        0.0.0.0/0   O_ASE   150  1           D   192.168.1.131   GigabitEthernet
0/0/0
    192.168.1.0/25  OSPF    10   2           D   192.168.1.131   GigabitEthernet
0/0/0
  192.168.1.193/32  OSPF    10   1           D   192.168.1.131   GigabitEthernet
0/0/0

OSPF routing table status : <Inactive>
         Destinations : 0        Routes : 0

[R1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R1>sys
Enter system view, return user view with Ctrl+Z.
[R1]in    
[R1]info-center
[R1]interface g 0/0/0
[R1-GigabitEthernet0/0/0]os    
[R1-GigabitEthernet0/0/0]ospf au    
[R1-GigabitEthernet0/0/0]ospf authentication-mode m    
[R1-GigabitEthernet0/0/0]ospf authentication-mode md5 1 c    
[R1-GigabitEthernet0/0/0]ospf authentication-mode md5 1 cipher 777777
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]
May  8 2024 15:35:01-08:00 R1 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=130.1.168.192, Neighb
orEvent=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 

[R1-GigabitEthernet0/0/0]
May  8 2024 15:35:01-08:00 R1 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=130.1.168.192, Ne
ighborAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate rea
son=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen, Nei
ghborChangeTime=2024-05-08 15:35:01-08:00) 
[R1-GigabitEthernet0/0/0]
May  8 2024 15:35:06-08:00 R1 %%01OSPF/3/NBR_CHG_DOWN(l)[2]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=131.1.168.192, Neighb
orEvent=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 

[R1-GigabitEthernet0/0/0]
May  8 2024 15:35:06-08:00 R1 %%01OSPF/3/NBR_DOWN_REASON(l)[3]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=131.1.168.192, Ne
ighborAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate rea
son=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen, Nei
ghborChangeTime=2024-05-08 15:35:06-08:00) 
[R1-GigabitEthernet0/0/0]
May  8 2024 15:35:06-08:00 R1 %%01RM/4/IPV4_DEFT_RT_CHG(l)[4]:IPV4 default Route
 is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEthe
rnet0/0/0, Nexthop=192.168.1.131, Neighbour=0.0.0.0, Preference=2516582400, Labe
l=NULL, Metric=16777216) 
[R1-GigabitEthernet0/0/0]
May  8 2024 15:35:22-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.1.168.192, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 

[R1-GigabitEthernet0/0/0]
May  8 2024 15:35:28-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.1.168.192, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
) 
[R1-GigabitEthernet0/0/0]
May  8 2024 15:35:28-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.1.168.192, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange) 
[R1-GigabitEthernet0/0/0]
May  8 2024 15:35:28-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.1.168.192, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding) 
[R1-GigabitEthernet0/0/0]
May  8 2024 15:35:28-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.1.168.192, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
 
[R1-GigabitEthernet0/0/0]
May  8 2024 15:36:00-08:00 R1 %%01RM/4/IPV4_DEFT_RT_CHG(l)[10]:IPV4 default Rout
e is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEth
ernet0/0/0, Nexthop=192.168.1.131, Neighbour=0.0.0.0, Preference=2516582400, Lab
el=NULL, Metric=16777216) 
[R1-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Nei
ghborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
 
[R1-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Nei
ghborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStar
t) 
[R1-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Nei
ghborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=
Exchange) 
[R1-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Nei
ghborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Lo
ading) 
[R1-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Nei
ghborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full
) 
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]q
[R1]q
<R1>save
  The current configuration will be written to the device. 
  Are you sure to continue? (y/n)[n]:y
  It will take several minutes to save configuration file, please wait.......
  Configuration file had been saved successfully
  Note: The configuration file will take effect after being activated
<R1>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on
 

AR2

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys    
[Huawei]sysname R2
[R2]in    
[R2]info-center
[R2]interface g 0/0/0
[R2-GigabitEthernet0/0/0]ip     
[R2-GigabitEthernet0/0/0]ip    
[R2-GigabitEthernet0/0/0]ip ad    
[R2-GigabitEthernet0/0/0]ip address 192.168.1.130 26
May  8 2024 14:12:36-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R2-GigabitEthernet0/0/0]q
[R2]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R2>sys    
<R2>system-view 
Enter system view, return user view with Ctrl+Z.
[R2]
[R2]
[R2]
[R2]os    
[R2]ospf 1 r    
[R2]ospf 1 router-id 192.168.1.130
[R2-ospf-1]ar    
[R2-ospf-1]area 0
[R2-ospf-1-area-0.0.0.0]192.168.1.128 0.0.0.63
                        ^
Error: Unrecognized command found at '^' position.
[R2-ospf-1-area-0.0.0.0]
[R2-ospf-1-area-0.0.0.0]ip     
[R2-ospf-1-area-0.0.0.0]ip ad    
[R2-ospf-1-area-0.0.0.0]ip ad
[R2-ospf-1-area-0.0.0.0]ne    
[R2-ospf-1-area-0.0.0.0]network 192.168.1.128 0.0.0.63
[R2-ospf-1-area-0.0.0.0]
[R2-ospf-1-area-0.0.0.0]
May  8 2024 14:28:19-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 

[R2-ospf-1-area-0.0.0.0]
May  8 2024 14:28:19-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[R2-ospf-1-area-0.0.0.0]
May  8 2024 14:28:19-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[R2-ospf-1-area-0.0.0.0]
May  8 2024 14:28:19-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange) 
[R2-ospf-1-area-0.0.0.0]
May  8 2024 14:28:19-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding) 
[R2-ospf-1-area-0.0.0.0]
May  8 2024 14:28:19-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
 
[R2-ospf-1-area-0.0.0.0]
May  8 2024 14:29:49-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 

[R2-ospf-1-area-0.0.0.0]
May  8 2024 14:29:52-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
) 
[R2-ospf-1-area-0.0.0.0]
May  8 2024 14:29:52-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange) 
[R2-ospf-1-area-0.0.0.0]
May  8 2024 14:29:52-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding) 
[R2-ospf-1-area-0.0.0.0]
May  8 2024 14:29:52-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Nei
ghborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full
) 
[R2-ospf-1-area-0.0.0.0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R2>sys
Enter system view, return user view with Ctrl+Z.
[R2]in    
[R2]info-center
[R2]interface g 0/0/0
[R2-GigabitEthernet0/0/0]
[R2-GigabitEthernet0/0/0]os    
[R2-GigabitEthernet0/0/0]ospf a
May  8 2024 15:35:06-08:00 R2 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=129.1.168.192, Neighb
orEvent=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 

[R2-GigabitEthernet0/0/0]ospf a
May  8 2024 15:35:06-08:00 R2 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=129.1.168.192, Ne
ighborAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate rea
son=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen, Nei
ghborChangeTime=2024-05-08 15:35:06-08:00) 
[R2-GigabitEthernet0/0/0]ospf a
May  8 2024 15:35:06-08:00 R2 %%01RM/4/IPV4_DEFT_RT_CHG(l)[2]:IPV4 default Route
 is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEthe
rnet0/0/0, Nexthop=192.168.1.131, Neighbour=0.0.0.0, Preference=2516582400, Labe
l=NULL, Metric=16777216) 
[R2-GigabitEthernet0/0/0]ospf au    
[R2-GigabitEthernet0/0/0]ospf authentication-mode m    
[R2-GigabitEthernet0/0/0]ospf authentication-mode md5 1    
[R2-GigabitEthernet0/0/0]ospf authentication-mode md5 1 c    
[R2-GigabitEthernet0/0/0]ospf authentication-mode md5 1 cipher 777777
[R2-GigabitEthernet0/0/0]
May  8 2024 15:35:27-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 

[R2-GigabitEthernet0/0/0]
May  8 2024 15:35:27-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
) 
[R2-GigabitEthernet0/0/0]
May  8 2024 15:35:27-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange) 
[R2-GigabitEthernet0/0/0]
May  8 2024 15:35:28-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding) 
[R2-GigabitEthernet0/0/0]
May  8 2024 15:35:28-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
 
[R2-GigabitEthernet0/0/0]
May  8 2024 15:36:00-08:00 R2 %%01OSPF/3/NBR_CHG_DOWN(l)[8]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=131.1.168.192, Neighb
orEvent=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 

[R2-GigabitEthernet0/0/0]
May  8 2024 15:36:00-08:00 R2 %%01OSPF/3/NBR_DOWN_REASON(l)[9]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=131.1.168.192, Ne
ighborAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate rea
son=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen, Nei
ghborChangeTime=2024-05-08 15:36:00-08:00) 
[R2-GigabitEthernet0/0/0]
May  8 2024 15:36:00-08:00 R2 %%01RM/4/IPV4_DEFT_RT_CHG(l)[10]:IPV4 default Rout
e is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEth
ernet0/0/0, Nexthop=192.168.1.131, Neighbour=0.0.0.0, Preference=2516582400, Lab
el=NULL, Metric=16777216) 
[R2-GigabitEthernet0/0/0]
May  8 2024 15:36:13-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Nei
ghborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
 
[R2-GigabitEthernet0/0/0]
May  8 2024 15:36:13-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Nei
ghborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStar
t) 
[R2-GigabitEthernet0/0/0]
May  8 2024 15:36:13-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Nei
ghborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=
Exchange) 
[R2-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Nei
ghborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Lo
ading) 
[R2-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R2 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=131.1.168.192, Nei
ghborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full
) 
[R2-GigabitEthernet0/0/0]q
[R2]q
<R2>sa    
<R2>save 
  The current configuration will be written to the device. 
  Are you sure to continue? (y/n)[n]:y
  It will take several minutes to save configuration file, please wait.......
  Configuration file had been saved successfully
  Note: The configuration file will take effect after being activated
<R2>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on
 

AR3

[R3-ospf-1-area-0.0.0.0]ne    
[R3-ospf-1-area-0.0.0.0]network 192.168.1.192 0.0.0.63
[R3-ospf-1-area-0.0.0.0]
[R3-ospf-1-area-0.0.0.0]
[R3-ospf-1-area-0.0.0.0]q
[R3-ospf-1]
[R3-ospf-1]
[R3-ospf-1]ar    
[R3-ospf-1]area 1
[R3-ospf-1-area-0.0.0.1]ne    
[R3-ospf-1-area-0.0.0.1]network 192.168.1.0 0.0.0.127
[R3-ospf-1-area-0.0.0.1]
[R3-ospf-1-area-0.0.0.1]
May  8 2024 14:33:49-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[R3-ospf-1-area-0.0.0.1]
May  8 2024 14:33:53-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
 
[R3-ospf-1-area-0.0.0.1]
May  8 2024 14:33:53-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change) 
[R3-ospf-1-area-0.0.0.1]
May  8 2024 14:33:53-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing) 
[R3-ospf-1-area-0.0.0.1]
May  8 2024 14:33:53-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 

[R3-ospf-1-area-0.0.0.1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R3>
<R3>sys
Enter system view, return user view with Ctrl+Z.
[R3]os    
[R3]os    
[R3]os    
[R3]ospf 1
[R3-ospf-1]
[R3-ospf-1]
[R3-ospf-1]
[R3-ospf-1]
[R3-ospf-1]ar    
[R3-ospf-1]arp-ping
[R3-ospf-1]area 0
[R3-ospf-1-area-0.0.0.0]
[R3-ospf-1-area-0.0.0.0]
[R3-ospf-1-area-0.0.0.0]ab    
[R3-ospf-1-area-0.0.0.0]abr-summary 

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R3>sys
Enter system view, return user view with Ctrl+Z.
[R3]os    
[R3]ospf 1
[R3-ospf-1]ar    
[R3-ospf-1]arp-ping
[R3-ospf-1]area 0
[R3-ospf-1-area-0.0.0.0]ab    
[R3-ospf-1-area-0.0.0.0]abr-summary 192.168.1.128 255.255.255.128
[R3-ospf-1-area-0.0.0.0]
[R3-ospf-1-area-0.0.0.0]q
[R3-ospf-1]q
[R3]
[R3]in    
[R3]info-center
[R3]interface g 0/0/1
[R3-GigabitEthernet0/0/1]os    
[R3-GigabitEthernet0/0/1]ospf au    
[R3-GigabitEthernet0/0/1]ospf authentication-mode md    
[R3-GigabitEthernet0/0/1]ospf authentication-mode md5 1 c    
[R3-GigabitEthernet0/0/1]ospf authentication-mode md5 1 cipher 666666
[R3-GigabitEthernet0/0/1]
May  8 2024 15:33:00-08:00 R3 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=4.4.4.4, NeighborEven
t=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 
[R3-GigabitEthernet0/0/1]
May  8 2024 15:33:00-08:00 R3 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=4.4.4.4, Neighbor
AreaId=16777216, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate re
ason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen, Ne
ighborChangeTime=2024-05-08 15:33:00-08:00) 
[R3-GigabitEthernet0/0/1]
May  8 2024 15:33:00-08:00 R3 %%01RM/4/IPV4_DEFT_RT_CHG(l)[2]:IPV4 default Route
 is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEthe
rnet0/0/1, Nexthop=192.168.1.2, Neighbour=0.0.0.0, Preference=2516582400, Label=
NULL, Metric=16777216) 
[R3-GigabitEthernet0/0/1]
May  8 2024 15:33:03-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, Neighb
orEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[R3-GigabitEthernet0/0/1]
May  8 2024 15:33:03-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, Neighb
orEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart) 

[R3-GigabitEthernet0/0/1]
May  8 2024 15:33:08-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, Neighb
orEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exc
hange) 
[R3-GigabitEthernet0/0/1]
May  8 2024 15:33:08-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, Neighb
orEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadi
ng) 
[R3-GigabitEthernet0/0/1]
May  8 2024 15:33:08-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, Neighb
orEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[R3-GigabitEthernet0/0/1]
May  8 2024 15:35:06-08:00 R3 %%01OSPF/3/NBR_CHG_DOWN(l)[8]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=129.1.168.192, Neighb
orEvent=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 

[R3-GigabitEthernet0/0/1]
May  8 2024 15:35:06-08:00 R3 %%01OSPF/3/NBR_DOWN_REASON(l)[9]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=129.1.168.192, Ne
ighborAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate rea
son=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen, Nei
ghborChangeTime=2024-05-08 15:35:06-08:00) 
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]q
[R3]in    
[R3]info-center
[R3]interface g 0/0/0
[R3-GigabitEthernet0/0/0]os    
[R3-GigabitEthernet0/0/0]ospf au    
[R3-GigabitEthernet0/0/0]ospf authentication-mode m    
[R3-GigabitEthernet0/0/0]ospf authentication-mode md5 1 c    
[R3-GigabitEthernet0/0/0]ospf authentication-mode md5 1 cipher 777777
[R3-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R3 %%01OSPF/3/NBR_DOWN_REASON(l)[10]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=130.1.168.192, N
eighborAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate re
ason=Neighbor Down Due to SequenceNum Mismatch, NeighborDownPrimeReason=M,I,MS b
it or SequenceNum Incorrect, NeighborChangeTime=2024-05-08 15:36:14-08:00) 
[R3-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=130.1.168.192, Nei
ghborEvent=SeqNumberMismatch, NeighborPreviousState=Full, NeighborCurrentState=E
xStart) 
[R3-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=130.1.168.192, Nei
ghborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=
Exchange) 
[R3-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=130.1.168.192, Nei
ghborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Lo
ading) 
[R3-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=130.1.168.192, Nei
ghborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full
) 
[R3-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Nei
ghborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
 
[R3-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Nei
ghborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStar
t) 
[R3-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Nei
ghborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=
Exchange) 
[R3-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Nei
ghborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Lo
ading) 
[R3-GigabitEthernet0/0/0]
May  8 2024 15:36:14-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=129.1.168.192, Nei
ghborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full
) 
[R3-GigabitEthernet0/0/0]q
[R3]q
<R3>sa    
<R3>save 
 

AR4

<Huawei>sys    
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sys    
[Huawei]sysname R4
[R4]in    
[R4]info-center
[R4]interface g 0/0/0
[R4-GigabitEthernet0/0/0]ip ad    
[R4-GigabitEthernet0/0/0]ip address 192.168.1.2 25
[R4-GigabitEthernet0/0/0]
May  8 2024 14:16:16-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R4-GigabitEthernet0/0/0]q
[R4]
[R4]
[R4]in    
[R4]info-center
[R4]interface ;    
[R4]interface l    
[R4]interface LoopBack 0
[R4-LoopBack0]ip ad    
[R4-LoopBack0]ip address 4.4.4.4 24
[R4-LoopBack0]q
[R4]
[R4]
[R4]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R4>sys
Enter system view, return user view with Ctrl+Z.
[R4]
[R4]
[R4]os    
[R4]ospf 1 r
             ^
Error:Incomplete command found at '^' position.
[R4]ospf 1 r    
[R4]ospf 1 router-id 4.4.4.4
[R4-ospf-1]ar    
[R4-ospf-1]area 1
[R4-ospf-1-area-0.0.0.1]ne    
[R4-ospf-1-area-0.0.0.1]network 192.168.1.0 0.0.0.127
[R4-ospf-1-area-0.0.0.1]
[R4-ospf-1-area-0.0.0.1]
May  8 2024 14:33:53-08:00 R4 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, Neighb
orEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[R4-ospf-1-area-0.0.0.1]
May  8 2024 14:33:53-08:00 R4 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, Neighb
orEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[R4-ospf-1-area-0.0.0.1]
May  8 2024 14:33:53-08:00 R4 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, Neighb
orEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[R4-ospf-1-area-0.0.0.1]
May  8 2024 14:33:53-08:00 R4 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, Neighb
orEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exc
hange) 
[R4-ospf-1-area-0.0.0.1]
May  8 2024 14:33:53-08:00 R4 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, Neighb
orEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadi
ng) 
[R4-ospf-1-area-0.0.0.1]
May  8 2024 14:33:53-08:00 R4 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, Neighb
orEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[R4-ospf-1-area-0.0.0.1]q
[R4-ospf-1]
[R4-ospf-1]
[R4-ospf-1]
[R4-ospf-1]de    
[R4-ospf-1]default
[R4-ospf-1]default-route-advertise a    
[R4-ospf-1]default-route-advertise always 
[R4-ospf-1]
[R4-ospf-1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R4>sys
Enter system view, return user view with Ctrl+Z.
[R4]dis    
[R4]display r    
[R4]display ip r    
[R4]display ip routing-tablep    
[R4]display ip routing-table p    
[R4]display ip routing-table protocol o    
[R4]display ip routing-table protocol ospf 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Public routing table : OSPF
         Destinations : 1        Routes : 1        

OSPF routing table status : <Active>
         Destinations : 1        Routes : 1

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

  192.168.1.128/25  OSPF    10   2           D   192.168.1.1     GigabitEthernet
0/0/0

OSPF routing table status : <Inactive>
         Destinations : 0        Routes : 0

[R4]
[R4]
[R4]
[R4]in    
[R4]info-center
[R4]interface g 0/0/0
[R4-GigabitEthernet0/0/0]os    
[R4-GigabitEthernet0/0/0]ospf au    
[R4-GigabitEthernet0/0/0]ospf authentication-mode m    
[R4-GigabitEthernet0/0/0]ospf authentication-mode md5 1 c    
[R4-GigabitEthernet0/0/0]ospf authentication-mode md5 1 cipher 666666
[R4-GigabitEthernet0/0/0]
[R4-GigabitEthernet0/0/0]
May  8 2024 15:33:04-08:00 R4 %%01OSPF/3/NBR_DOWN_REASON(l)[0]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=131.1.168.192, Ne
ighborAreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmedi
ate reason=Neighbor Down Due to SequenceNum Mismatch, NeighborDownPrimeReason=M,
I,MS bit or SequenceNum Incorrect, NeighborChangeTime=2024-05-08 15:33:04-08:00)
 
[R4-GigabitEthernet0/0/0]
May  8 2024 15:33:04-08:00 R4 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, Neighb
orEvent=SeqNumberMismatch, NeighborPreviousState=Full, NeighborCurrentState=ExSt
art) 
[R4-GigabitEthernet0/0/0]
[R4-GigabitEthernet0/0/0]
May  8 2024 15:33:08-08:00 R4 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, Neighb
orEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exc
hange) 
[R4-GigabitEthernet0/0/0]
May  8 2024 15:33:08-08:00 R4 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, Neighb
orEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadi
ng) 
[R4-GigabitEthernet0/0/0]
May  8 2024 15:33:08-08:00 R4 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, Neighb
orEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[R4-GigabitEthernet0/0/0]q
[R4]q
<R4>sa    
<R4>save 
  The current configuration will be written to the device. 
  Are you sure to continue? (y/n)[n]:y
  It will take several minutes to save configuration file, please wait.......
  Configuration file had been saved successfully
  Note: The configuration file will take effect after being activated
<R4>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on